> Do you have a "file" called /dev/usb ?
>
> On my system they have longer names.
>
> What does
> ls /dev/usb*
> show?
>
> allan
> --
It shows:
/dev/usbdev1.1_ep00 /dev/usbdev1.2_ep81 /dev/usbdev3.1_ep81
/dev/usbdev1.1_ep81 /dev/usbdev2.1_ep00 /dev/usbdev4.1_ep00
/dev/usbdev1.2_ep00 /
At Fri, 18 Jul 2008 20:56:24 -0700 (PDT) Norman Hakim <[EMAIL PROTECTED]> wrote:
> I have problem regarding mounting my usb thumbdrive. I have tried to
> add this line to /etc/fstab:
>
> echo "/dev/usb /mnt/usb auto noauto,rw,user" >>/etc/fstab
Do you have a "file" called /dev/usb ?
On my system
NORMAN HAKIM YAHYA
--- On Fri, 7/18/08, Norman Hakim <[EMAIL PROTECTED]> wrote:
> From: Norman Hakim <[EMAIL PROTECTED]>
> Subject: [gentoo-user] Mounting usb problem
> To: gentoo-user@lists.gentoo.org
> Date: Friday, July 18, 2008, 10:56 PM
> Hi all,
>
> I have problem regarding mounting my
Hi all,
I have problem regarding mounting my usb thumbdrive. I have tried to add this
line to /etc/fstab:
echo "/dev/usb /mnt/usb auto noauto,rw,user" >>/etc/fstab
After i mount it:
mount /dev/usb
It shows there is no mount point for /dev/usb
I wonder is it this is the correct line that i sho
> Jason Carson wrote:
>> << SNIP >>
>>
>>
>> So what does this mean?
>>
>> ioctl[unknown???]: Invalid argument
>>
>> I can't get hostapd to startup until this is fixed.
>>
>>
>>
>
> No knowledge here but google may have found something.
>
> http://madwifi.org/ticket/422
>
> Hope that helps.
>
> Da
Jason Carson wrote:
<< SNIP >>
So what does this mean?
ioctl[unknown???]: Invalid argument
I can't get hostapd to startup until this is fixed.
No knowledge here but google may have found something.
http://madwifi.org/ticket/422
Hope that helps.
Dale
:-) :-)
--
gentoo-user@lists.g
I have installed and configured my wirelss network with MadWifi and
wpa_supllicant. However it is unencrypted. What do I have to do to setup
WPA encryption? I have followed this
(http://gentoo-wiki.com/HOWTO_Building_a_Wireless_Access_Point#WPA_Encryption)
but when I run...
hostapd -dd /etc/hostap
I did some updates today. "emerge --sync" and updated world on my
"production machine". Things went OK, including running python-updater.
Then I scp'd the contents of /usr/portage/distfiles over to my "hot
backup machine", ran "emerge --sync" (pointing at my production machine)
and updated. Ju
> ok, I got it working without encryption. Here is what I did I configured
> my kernel according to these webpages...
>
> http://madwifi.org/wiki/Requirements
> and
> http://madwifi.org/wiki/UserDocs/KernelConfig
>
> ...then I configured my system as follows...
>
> 1)Add madwifi to USE flags
> 2)em
ok, I got it working without encryption. Here is what I did I configured
my kernel according to these webpages...
http://madwifi.org/wiki/Requirements
and
http://madwifi.org/wiki/UserDocs/KernelConfig
...then I configured my system as follows...
1)Add madwifi to USE flags
2)emerge wpa_supplicant
When ordering items by name, a separate and distinct sequence is scene for
A-Z before the sequence for a-z. This is the expected behavior. What might i
need to look up to intermix [Aa]-[Zz]?
Sebastian Günther wrote:
* Nikos Chantziaras ([EMAIL PROTECTED]) [16.07.08 17:55]:
Sebastian Günther wrote:
* Nikos Chantziaras ([EMAIL PROTECTED]) [16.07.08 15:02]:
Thanks for helping in tracking down this issue. Here's /etc/conf.d/splash:
SPLASH_VERBOSE_ON_ERRORS="no"
try turning this to y
=== On Saturday 19 July 2008, Neil Bothwick wrote: ===
> On Fri, 18 Jul 2008 19:02:33 +0400, Andrew Gaydenko wrote:
> > After upgrading to 2.6.26 I have got a problem with starting hwclock
> > service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
> > to /conf.d/modules, but the m
* Alan Mackenzie ([EMAIL PROTECTED]) [18.07.08 23:00]:
> Hi, Gentoo,
>
Hi,
> I'm having a great time installing Gentoo, and everything's going
> swimmingly, including having compiled a kernel, got networking working, I
> can use a USB stick, .
>
fine,
> Except I've hit a brick wall. I want
Hi, Gentoo,
I'm having a great time installing Gentoo, and everything's going
swimmingly, including having compiled a kernel, got networking working, I
can use a USB stick, .
Except I've hit a brick wall. I want to set up my console keyboard, so I
go to edit /etc/conf.d/keymaps, as described
On 18 Jul 2008, at 17:10, Jason Carson wrote:
Yeah, I read the the HOWTO WAP but I am confused. It said to go to
another
article when using MADWIFI which told be to use the command...
ifconfig ath0 down
wlanconfig ath0 destroy
wlanconfig ath0 create wlandev wifi0 wlanmode ap
Right. I didn'
On Fri, 18 Jul 2008 19:02:33 +0400, Andrew Gaydenko wrote:
> After upgrading to 2.6.26 I have got a problem with starting hwclock
> service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
> to /conf.d/modules, but the module loads after the service starting.
If you need rtc_cmos every
If you like to use a DVD-R, you may better use cdrecord instead of growisofs in
order to get compatibility. Growisofs was designed on top of DVD+RW which uses
something similar to packetwriting.
Use
mkisofs -i xx.iso -dvd-video -r -J DVD/
cdrecord -v -sao xx.iso
Jörg
Thank You.
--
gent
On 18 Jul 2008, at 15:30, Jason Carson wrote:
...
I want to setup a wireless router for the first time using WPA.
Here is
the setup I want...
Internet---Gentoo Wireless Router---My Computer
I have configured my kernel properly from what I can tell and emerged
madwifi. However when I modprob
Mick wrote:
[...]
For some reason on the 2.6.24-gentoo-r8 kernel the xf86-video-ati fails to
install any modules, hence this message. I haven't configured this box for
ages so I may be misunderstanding something here. Do I have to switch to the
kernel drivers?
You need to compile a kernel
On Friday 18 July 2008, Duane Griffin wrote:
> 2008/7/18 Mick <[EMAIL PROTECTED]>:
> > Hi All,
> >
> > I rolled up a new kernel after I ran make oldconfig and noticed this
> > little message:
>
> [snip]
>
> > WARNING: modpost: Found 10 section mismatch(es).
>
> [snip]
>
> > What's it telling me? I
On Friday 18 July 2008, Nikos Chantziaras wrote:
> Mick wrote:
> > Hi All,
> >
> > I rolled up a new kernel after I ran make oldconfig and noticed this
> > little message:
> > [...]
> > WARNING: modpost: Found 5 section mismatch(es).
> > To see full details build your kernel with:
> > 'make CONFIG_
2008/7/18 Mick <[EMAIL PROTECTED]>:
> Hi All,
>
> I rolled up a new kernel after I ran make oldconfig and noticed this little
> message:
[snip]
> WARNING: modpost: Found 10 section mismatch(es).
[snip]
> What's it telling me? Is this something I should ignore?
The tool has detected something that
On Freitag, 18. Juli 2008, Mick wrote:
> Hi All,
>
> I rolled up a new kernel after I ran make oldconfig and noticed this little
> message:
> ===
> . . .
> CC arch/x86/lib/usercopy_32.o
> AR arch/x86/lib/lib.a
> LD vmlinux.o
> MODPOST vmlin
Greetings,
I want to setup a wireless router for the first time using WPA. Here is
the setup I want...
Internet---Gentoo Wireless Router---My Computer
I have configured my kernel properly from what I can tell and emerged
madwifi. However when I modprobe ath_pci nothing shows up. When I do
ifconf
On Friday 18 July 2008, Andreas Niederl wrote:
> Andreas Niederl wrote:
> > Mick wrote:
>
> [...]
>
> >> # grep -i radeon /boot/config-$(uname -r)
> >> CONFIG_FB_RADEON=y
> >> CONFIG_FB_RADEON_I2C=y
> >> CONFIG_FB_RADEON_BACKLIGHT=y
> >> # CONFIG_FB_RADEON_DEBUG is not set
> >
> > CONFIG_DRM and CO
Mick wrote:
Hi All,
I rolled up a new kernel after I ran make oldconfig and noticed this little
message:
[...]
WARNING: modpost: Found 5 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
[...]
What's it telling me? Is this something I sho
Hi All,
I rolled up a new kernel after I ran make oldconfig and noticed this little
message:
===
. . .
CC arch/x86/lib/usercopy_32.o
AR arch/x86/lib/lib.a
LD vmlinux.o
MODPOST vmlinux.o
WARNING: modpost: Found 10 section mismatch(es).
To
Fri, 18 Jul 2008 12:47:52 +
dhk <[EMAIL PROTECTED]> wrote:
> Sebastian Günther wrote:
> > * Andrew Tchernoivanov ([EMAIL PROTECTED]) [15.07.08 01:41]:
> >> Are the characters on the screen readable? I had this problem
> >> too, along with the black grub screen. If they aren't - try adding
> >
Andrew Gaydenko wrote:
=== On Friday 18 July 2008, Joshua D Doll wrote: ===
Andrew Gaydenko wrote:
=== On Friday 18 July 2008, Alan McKinnon wrote: ===
On Friday 18 July 2008, Andrew Gaydenko wrote:
Hi!
After upgrading to 2.6.26 I have got a problem w
=== On Friday 18 July 2008, Joshua D Doll wrote: ===
> Andrew Gaydenko wrote:
> > === On Friday 18 July 2008, Alan McKinnon wrote: ===
> >
> >> On Friday 18 July 2008, Andrew Gaydenko wrote:
> >>> Hi!
> >>>
> >>> After upgrading to 2.6.26 I have got a problem with starting hwclock
>
Andrew Gaydenko wrote:
=== On Friday 18 July 2008, Alan McKinnon wrote: ===
On Friday 18 July 2008, Andrew Gaydenko wrote:
Hi!
After upgrading to 2.6.26 I have got a problem with starting hwclock
service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
to /conf.d/module
=== On Friday 18 July 2008, Alan McKinnon wrote: ===
> On Friday 18 July 2008, Andrew Gaydenko wrote:
> > Hi!
> >
> > After upgrading to 2.6.26 I have got a problem with starting hwclock
> > service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
> > to /conf.d/modules, but the mod
* Andrew Gaydenko ([EMAIL PROTECTED]) [18.07.08 17:03]:
> Hi!
>
> After upgrading to 2.6.26 I have got a problem with starting hwclock
> service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
> to /conf.d/modules, but the module loads after the service starting.
>
> So, questions are
On Friday 18 July 2008, Andrew Gaydenko wrote:
> Hi!
>
> After upgrading to 2.6.26 I have got a problem with starting hwclock
> service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
> to /conf.d/modules, but the module loads after the service starting.
>
> So, questions are:
>
> 1. How t
Hi,
emerge will remerge regardless of it's state. Is
there a way to tell portage to do that for a package's DEPENDS as well?
I have 6 ebuilds I maintain myself, all are CVS checkout builds
with - version numbers, call them packageA, packageB ... packageF.
To make my life easier I have a
Hi!
After upgrading to 2.6.26 I have got a problem with starting hwclock
service - it doesn't find /dev/rtc. I have tried to add rtc_cmos
to /conf.d/modules, but the module loads after the service starting.
So, questions are:
1. How to force the module loading be before the service starting?
I am a novice with respect to sound.
Nearly everything works.
totem plays CDs
system sounds are OK
The trouble is that the cd player, gnome-cd part of gnome-media,
says there is no disc in the drive (there is only one drive).
I don't have many USE flags (in particular ogg, wavpack, and vorbi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
dhk wrote:
| So what is the solution to making grub visible again? I remember when
| it changed, I didn't understand the message displayed and I still don't
| know the fix.
|
| Running emerge --config grub doesn't work.
|
| Is it as simple as changin
Sebastian Günther wrote:
* Andrew Tchernoivanov ([EMAIL PROTECTED]) [15.07.08 01:41]:
Are the characters on the screen readable? I had this problem too, along
with the black grub screen. If they aren't - try adding vga=0x31B to your
grub.conf
Why should that help with grub? Did not found any h
Andreas Niederl wrote:
Mick wrote:
[...]
# grep -i radeon /boot/config-$(uname -r)
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_DRM and CONFIG_DRM_RADEON are needed for direct rendering. The
respective options are found in
sean <[EMAIL PROTECTED]> wrote:
> Jorg,
>
> Another update. I had made two attempts burning my movie to a no-brand
> DVD-R.
>
> Not wanting to waste another DVD-R I instead used a brand name DVD+RW
> for another test.
> It worked, the movie played. When I get the chance I will pick up a
>
Mick wrote:
On Friday 18 July 2008, Andreas Niederl wrote:
[...]
I'm just guessing here, but maybe your kernel is missing DRM support for
your graphics chip.
What's the output of grep -i radeon /boot/config-$(uname -r) ?
# grep -i radeon /boot/config-$(uname -r)
CONFIG_FB_RADEON=y
CONFIG_FB_
43 matches
Mail list logo
