From: Dominik Zajac [mailto:[EMAIL PROTECTED]
Sent: Friday, May 30, 2008 10:24 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] K3b complains about my locale
if theres no file 02local you have to create it and set your locales there.
after donig this run env-update
regards
I'm having trouble running opengl apps like glxgears and tremulous. The
nvidia kernel module is loaded and eselect reports that opengl is being
handled by nvidia but still no opengl app runs. Glxgears complains about
it being run in the wrong display.
-Original Message-
From: Mark Knecht [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 08, 2008 12:26 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Gentoo AMD64, games freeze!
On Mon, Apr 7, 2008 at 9:19 PM, Gyuszk [EMAIL PROTECTED] wrote:
Iain Buchanan wrote:
21, 2008 12:18 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] {OT} Power supply or motherboard dead?
On 20 Mar 2008, at 19:42, Marzan, Richard non Unisys wrote:
Get a volt meter and measure the voltage. Red is 5+ volts yellow is
12+
volts; if you're getting less than
Get a volt meter and measure the voltage. Red is 5+ volts yellow is 12+
volts; if you're getting less than that or way too much than those
values then the component needs to be replaced. Try also swapping the
memory modules out one by one; interchanging them and see if that makes
it boot up. Some,
-Original Message-
From: Alan McKinnon [mailto:[EMAIL PROTECTED]
Sent: Monday, February 11, 2008 11:32 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Nvidia-drivers failing to install because
kernel tree not found
On Monday 11 February 2008, Marzan, Richard non
I recently read an article at planet.gentoo.org about a 2 serious bugs
in the kernel that could lead to someone crashing or rooting a system
with linux kernels prior to gentoo-sources-2.6.23-r2. So being the
paranoid one that I am, I unmasked this ebuild and installed it. I
performed a `make
-Original Message-
From: Alan McKinnon [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 29, 2008 4:58 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Sound jack isolations
On Tuesday 29 January 2008, Marzan, Richard non Unisys wrote:
I tried googling around
-Original Message-
From: news [mailto:[EMAIL PROTECTED] On Behalf Of James
Sent: Wednesday, January 30, 2008 11:29 AM
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Re: Sound isolation issue coming to a close
Richard Marzan richardmarzan at optonline.net writes:
after
I tried googling around but no helpful content so far. I have a laptop
with built-in sound. It uses the HDA_intel kernel module. My problem is
that I can't silence the onboard/built-in speakers when I plug in the
headphones to the machine. Muting sound would lead to all jacks and
audio ports to be
Man fstab man nfs{d} man mount and search for sync write options. Wsize
and rsize=8192 and wsize=8192 might work but I think they are deprecated.
Althought, async or sync might still be used. Use these options when mouting
your nfs share or make them permanent in your fstab file. Gentoo-wiki
I would have looked this up myself but I'm not able to access
the net at this time. But may I have the proper steps to register to the
gentoo-dev ml? Thank you!
Regards,
Richard
--
gentoo-user@lists.gentoo.org mailing list
-Original Message-
From: Hemmann, Volker Armin [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 02, 2008 9:59 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Nvidia users: please sign petition for
open/free drivers
On Mittwoch, 2. Januar 2008, Jesús Guerrero
2008 11:33:36 -0600, Marzan, Richard non Unisys wrote:
Keeping in mind that this petition probably might not work, I
think
it's a good idea to let Nvidia know how many people are interested
in
having free drivers. This might lead them to release information
on
how
to write drivers
Recently, I've changed the -march from k8 to athlon64 and it failed to
build packages. Am I doing something wrong here? I suspect that I am
supposed to rebuild some packages first before rebuilding with emerge
-eDNtv system and world. Any helpful info will be helpful. Thanks in
advance.
Regards,
, Richard non Unisys wrote:
Portage can continue to build packages if one fails.
# emerge -options package/list_of_packages || until emerge
-same_options_as_before package/list_of_packages ; do : ;done
Yes it can, but not with this, which will repeatedly try to build the
same package
Portage can continue to build packages if one fails.
# emerge -options package/list_of_packages || until emerge
-same_options_as_before package/list_of_packages ; do : ;done
All with a little help from bash, of course. I think Andressen taught me this
trick. It makes no sense to leave your box
I'm trying to get my Broadcom 4311 b/g card to work with the native
kernel driver (bcm43xx) and b43-fwcutter but it's does not work. I
placed the extracted firmware code in /lib/firmware and dmesg states
that it failed to load the module. Has anyone gotten this card to work
and how? Any link
John,
I remember having the same problem before and I believe that
deleting the appropriate .gnome and .gnome2 directories would fix the
problem. I'm not sure why this happens or why this solution worked for
me but it did. You might lose some settings. Do not worry because the
.gnome and
-Original Message-
From: John covici [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 12, 2007 2:59 PM
To: gentoo-user@lists.gentoo.org
Subject: RE: [gentoo-user] gnome-session no longer starts after
updating
world
on Wednesday 12/12/2007 Marzan, Richard non
Unisys([EMAIL
-Original Message-
From: Stefan G. Weichinger [mailto:[EMAIL PROTECTED]
Sent: Friday, December 07, 2007 1:21 AM
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] services not starting since move to amd64
Greets, gentoo-users,
as soem of you might remember I only recently
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 25, 2007 2:08 PM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Is this drive toast?
On Tue, 25 Sep 2007 12:56:28 -0500, Dan Farrell wrote:
MAxtor sucks in my opinion.
I'm trying to fetch all possible files including those that might
satisfy dependencies and USE flags for every package on my system. The
reason I'm doing this is because I have a network-less machine that I
wish to transfer these files to so that I may have the same environment
on both machines.
-Original Message-
From: Mick [mailto:[EMAIL PROTECTED]
Sent: Friday, September 21, 2007 6:00 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] disable dropping to -j1 when building certain
programs
On Thursday 20 September 2007, Richard Marzan wrote:
On Thu,
How can I disable portage dropping or overriding my MAKEOPTS variable
setting when building certain programs?
certain
programs
Marzan, Richard non Unisys skrev:
How can I disable portage dropping or overriding my MAKEOPTS variable
setting when building certain programs?
Isn't that self defeating, when an ebuild contains enforced -j1 it's
because the program can't compile with -j2 or higher
-Original Message-
From: Jean-Philippe Caruana
[mailto:[EMAIL PROTECTED]
Sent: Friday, September 14, 2007 3:21 AM
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] ERROR : sys-libs/db-4.5.20_p2 failed - econf
failed
hi,
I still have problems nuilding my box.
I did a emerge
failed - econf failed
Marzan, Richard non Unisys a écrit :
Are you using ccache or distcc. Safe optimizations are -O2 with-march=
and -fomit-frame-pointer.
no, i'm not using ccache or distcc
--
Jean-Philippe Caruana
--
[EMAIL PROTECTED] mailing list
--
[EMAIL PROTECTED] mailing list
Really?...Portage can do that? because I would like to get portage on my
system to do that.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 13, 2007 5:00 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Immensely disappointed
On Thu, 13 Sep 2007 12:35:50 -0500, Neil Bothwick wrote:
Step 1: Stop top posting
Step 2: Read /etc/make.conf.example, the part about PORTAGE_ELOG
Sure will. Thanks Neil.
--
[EMAIL PROTECTED] mailing list
know
since I don't understand the gnome configuration files. I will do it as
a last resort, but I would rather understand what happens, and fix it.
Thanks,
Moshe
* Marzan, Richard non Unisys [EMAIL PROTECTED] [12/09/07
12:03]:
Hello,
I came across the same problem. I believe
Solved it. Just delete your local .gnome .gnome2 .gnome_private files in
your home dir.
-Original Message-
From: Moshe Kamensky [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 12, 2007 8:20 AM
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Re: metacity Woes
Hi,
I don't
Hello,
I came across the same problem. I believe it happened during an
upgrade or update of either gnome/gtk or libexpat. I know that the
execution of metacity and such settings are set in the .gnome* files. So
as a last resort without any help I just figured; why not just delete
the
Try emerge --sync...Then visit
http://forums.gentoo.org/viewtopic-t-575655.html The first post worked
for me. Do what it asks and then re-emerge world. Then revdep-rebuild.
-Original Message-
From: Jean-Philippe Caruana
[mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 12, 2007 12:20
.
-Original Message-
From: Dennis Taylor [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 06, 2007 10:25 AM
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: Can't emerge X11
Marzan, Richard non Unisys wrote:
Yes, there is a variable that you can set in /etc/make.conf
Yes, there is a variable that you can set in /etc/make.conf
VIDEO_CARDS=sis
ALSA_CARDS=emu10k1 ##nice one to set as well
To see a full list of the cards available for the variables run
#emerge --info
From the output you can see which options are available. Once you set
these variables in
36 matches
Mail list logo