Hi all
after upgrading KDE I cannot set the screen frequency. By default it is
set to 50 Hz, but it should be 54 Hz.
Every time I have to change it, but every time I start the PC the
frequency is always at 50 Hz.
This both as root and as user.
Any tip?
emilio
Volker Armin Hemmann ha scritto:
On Monday 30 August 2010, econti wrote:
Hi all
is it possible to page the output of "emerge -NDpvu world" in a terminal?
'emerge -NDpvu world | more' does not work.
emilio
works with less...
Not for me! :-(
Bye
emilio
Hi all
is it possible to page the output of "emerge -NDpvu world" in a terminal?
'emerge -NDpvu world | more' does not work.
emilio
cut
further
4 - I cannot mount a partition (both from command line and from
desktop) the answer is "Only root can mount a device" (all
permissions are the same as before)
I would check out "groups " and see whether you are a member
of the plugdev group.
5 - I am not able to become root
Hi all,
finally I decided to upgrade from kde3 to kde4. All went well, but:
1 - I am not able to fix the frequency of the display, neither using
nvidia-settings nor throught System-settings->Dislplay. Every time a
session starts I have to set it again (and this both as root and as user);
As u
Amit Dor-Shifer ha scritto:
With regards to this:
I believe I'm in the same situation:
amit0 ~ # emerge -auvt world
These are the packages that would be merged, in reverse order:
Calculating dependencies... done!
!!! Multiple package instances within a single package slot have been
pulled
Dirk Heinrichs ha scritto:
Am Samstag 17 Oktober 2009 17:54:49 schrieb econti:
Now, to emerge akonadi-server, kcontrol I should downgrade all the qt-*
to the 4.5.1 version.
Says who? You can only tell what want's the downgrade when you add -t.
akonadi-server needs some qt pac
Tim Jones ha scritto:
Post #2 from Mr. McKinnon is the question.
If, as it sounds like, you didn't let revdep-rebuild go ahead and
reemerge those packages itself, but rather you reemerged them
yourself, then I believe you will need to `revdep-rebuild -i` (see
manpage) to see if it has any other c
Hi all
after two months I made a world upgrade. All went well, but when I ran
"revdep-rebuild" I received this:
localhost ~ # revdep-rebuild
* Configuring search environment for revdep-rebuild
* Checking reverse dependencies
* Packages containing binaries and libraries broken by a package upda
Hi all
my to-day "world" is the one attached. I am just a little bit confused.
Can anyone explain to me what's happening? :-(
Thanks
emilio
[ebuild U ] media-gfx/imagemagick-6.5.2.9 [6.5.1.0] USE="X bzip2 corefonts
openmp perl truetype zlib -djvu -doc -fontconfig -fpx -graphviz -gs -hdri -jbi
AllenJB ha scritto:
cut
On to your next issue where 2 versions of firefox are being pulled in.
First of all you need to remove the package.mask entry you added,
since it masked out all versions of firefox above 2.0.0 - that
includes both firefox 2 and firefox 3 - not particularly useful.
The
Hi all,
to-day I am having some trouble to update my system.
Well, 'emerge --sync' and I received a message telling me a new version
of portage is available and I should update it immediately. But, before
upgrading it I ran 'emerge -NDpvu world'. Here is the output:
>localhost ~ # emerge -NDpv
Francesco Talamona ha scritto:
On Saturday 27 September 2008, econti wrote:
Francesco Talamona ha scritto:
On Saturday 27 September 2008, econti wrote:
Hi all,
running revdep-rebuild I see a very long list of broken linking
(see the attached gzipped file of the revdep-rebuild
Francesco Talamona ha scritto:
On Saturday 27 September 2008, econti wrote:
Hi all,
running revdep-rebuild I see a very long list of broken linking (see
the attached gzipped file of the revdep-rebuild output).
At the end revdep-rebuild emerge orbit and libbonobo.
After that I ran revdep
Hi all,
running revdep-rebuild I see a very long list of broken linking (see the
attached gzipped file of the revdep-rebuild output).
At the end revdep-rebuild emerge orbit and libbonobo.
After that I ran revdep-rebuild again: same long list and same packages
to emerge.
That for three times (t
cut
The others already gave you a working solution, but here's the reason
this is happening:
The qca package recently became slotted. However, only qca-1.0-r3 and
higher are slotted. You have qca-1.0-r2 installed with is *not*
slotted and therefore you can't install qca-2.x at the same ti
Hi all, to-day I upgraded my portage and then I ran
emerge -NDpvu here is the output:
[ebuild U ] dev-libs/libsigc++-2.2.2 [2.0.17] USE="-debug -doc
-test" 4,397 kB
[ebuild U ] media-video/realplayer-11.0.0.4028-r1 [10.0.9] USE="X
-nsplugin" 0 kB
[ebuild U ] dev-cpp/cairomm-1.6.0 [
Hi all,
to-day I upgraded realplayer from 10.0.9 to 11.0.0.4028-r1.
Now videos have weird colours.
Any tip?
Regards
emilio
Albert Hopkins ha scritto:
On Sun, 2008-08-17 at 14:20 +0200, econti wrote:
So I went to http://bugs.gentoo.org/show_bug.cgi?id=214265 to fix but
I
understood absolutely nothing. :-(
Could anyone explain to me in which manner I should use the bug page
of
gentoo?
I really don&#
Hi all,
even if I have been using gentoo for 2 years surely I know to be a
newbie again. ;-(
Yesterday, upgrading the portage and after an "emerge -NDpvu world" I
received the following massage:
Calculating world dependencies /
!!! The following installed packages are masked:
- app-admin/gnome
Hi all,
finally my holidays are over and I made a portage upgrade.
Then: emerge -NDpvu world and I received this:
These are the packages that would be merged, in order:
Calculating world dependencies /
!!! All ebuilds that could satisfy
">=media-video/ffmpeg-0.4.9_p20070616-r3" have been masked
Hi all
I'd like to install OO on my Gentoo PC. I ran
emerge -s openoffice
and here is the result
* app-office/openoffice
Latest version available: 2.4.0
Latest version installed: [ Not Installed ]
Size of files: 247,060 kB
Homepage: http://go-oo.org
Description:
cut
Hi,
Try switching Off both '-zeroconf -vram'.
From the dhcpcd-3.2.3 elog:
elog> * ZeroConf support enabled
elog> * DUID support enabled
elog> * You have installed dhcpcd with zeroconf support.
elog> * This means that it will always obtain an IP address even if no
elog> * DHCP server can
Rumen Yotov ha scritto:
econti МапОÑ?а:
Hi all, yesterday I upgraded dhcpcd, now at boot time I receive this
message:
err, eth0: Failed to lookup hostname via DNS: Name or service not known
Even so, the IP is correctly assigned by the router.
Could anyone help me to understand
Hi all, yesterday I upgraded dhcpcd, now at boot time I receive this
message:
err, eth0: Failed to lookup hostname via DNS: Name or service not known
Even so, the IP is correctly assigned by the router.
Could anyone help me to understand? ;-)
Bye
emilio
--
gentoo-user@lists.gentoo.org maili
Hi all,
may be this is a stupid question but I am not able to set the
anti-aliasing on firefox and thunderbird.
Regards
emilio
--
gentoo-user@lists.gentoo.org mailing list
Hi all
I should upgrade xorg-server from 1.3.0.0-r2 to 1.3.0.0-r4.
But I read in another mailing list that the new version of xorg-server
has some (many?) bugs.
Is this true also for the gentoo version? Should I wait before upgrading?
Regards
emilio
--
gentoo-user@lists.gentoo.org mailing lis
Dale ha scritto:
econti wrote:
Hi all,
yesterday I upgraded hplip. I should not, after a bad experience on
FreeBSD.
But, while on FreeBSD I was able to downgrade to the previuos version,
I could not do the same on Gentoo.
The sequence:
- after upgrading hplip I ran hp-setup: the printer has
Hi all,
yesterday I upgraded hplip. I should not, after a bad experience on FreeBSD.
But, while on FreeBSD I was able to downgrade to the previuos version, I
could not do the same on Gentoo.
The sequence:
- after upgrading hplip I ran hp-setup: the printer has been configured
- then I tried to p
Anno v. Heimburg ha scritto:
econti wrote:
So . . . I unmerged all the single app, unmerged kdebase-kioslaves and
emerged kdebase.
Now all works as before.
Wait, I don't get it. You have the single, all-in-one kdebase package
installed (which, to the best of my knowledge, inc
Dirk Heinrichs ha scritto:
Am Samstag 24 November 2007 schrieb econti:
Hi all,
to-day I wanted ro emerge kdebase-kioslaves.
Why?
To do so I had to unmerge kdebase,
Why?
then to emerge again every single application of kdebase:
konqueror, konsole, kate, kcontrol, kdm
Hi all,
to-day I wanted ro emerge kdebase-kioslaves. To do so I had to unmerge
kdebase, then to emerge again every single application of kdebase:
konqueror, konsole, kate, kcontrol, kdm, etc.
Now I am not able to login anymore
Neither as root nor as user.
I tried to set a new password on co
Hi all,
to-day I re-emerged kdegraphics. At the end I had this message:
* /usr/kde/3.5/share/applications/kde/kfaxview.desktop: value
"image/fax-g3" for string list key "MimeType" in group "Desktop Entry"
does not have a semicolon (';') as trailing character
* /usr/kde/3.5/share/applications/k
Hi all
yesterday I emerged the nvidia-drivers. All went well.
Then I ran 'emerge -NDpvu world' (I set nvidia flag in make.conf) and
found out to have 2 versions of qt (3.3.8-r3 and 4.3.0-r2) and 2
versions og gnupg (1.4.7-r1 and 1.9.21).
So I unmerged gnupg-1.4.7-r1 and ran 'emerge -NDpvu world'
cut
not exactly sure, but I'd look under menuconfig-> Device Drivers->
Graphics support. In particular:
<*> VESA VGA graphics support
VESA driver type (vesafb) (use vesafb-tng on 32-bit)
Console display driver support --->
[*] Video mode selection support (you already have this
Hi all,
as the subject says! ;-)
Now my system should be updated. gcc, world and, to-day, the kernel.
Well, everything seems to work fine . . . but:
1 among the boot options I had "vga=0x317". Now this option gives me:
"You passed an undefined mode number."
"Press to see video modes availa
Willie Wong ha scritto:
On Wed, Oct 24, 2007 at 05:24:19PM +0200, Penguin Lover econti squawked:
Hi all,
the upgrade of my system has had another stop.
This time due to PyQt. I googled and found many problems regarding PyQt,
but, because of my english, I did not understand what exactly to
Hi all,
the upgrade of my system has had another stop.
This time due to PyQt. I googled and found many problems regarding PyQt,
but, because of my english, I did not understand what exactly to do.
Here is my error log:
--
>>> Unpacking source...
>>>
Roman Zilka ha scritto:
Hey Emilio,
I should upgrade /etc/locale.build to /etc/locale.gen.
that's right, you should.
I did not find anything about this upgrade.
glibc has been warning about this for a very long time (>year, I guess)
during emerge. glibc-2.6.1 is the first
Hi all,
I should upgrade /etc/locale.build to /etc/locale.gen.
I did not find anything about this upgrade.
Is it a matter of name changing only?
Regards.
emilio
--
[EMAIL PROTECTED] mailing list
Bo Ørsted Andresen ha scritto:
On Sunday 21 October 2007 18:23:16 Kenneth Prugh wrote:
At the end running etc-update I found 26 config files to upgrade .
Surely I did something wrong (to upgrade "udev" I had to unmerge
"coldplug") and the result has been a failure in booting gentoo.
Here is t
Hi all,
after upgrading xorg, yesterday I started to upgrade gcc (from 3.x to
4.x) following the Gentoo GCC Upgrade Guide. All went well up to "emerge
-eav system".
The command seemed work fine but, for some reason, it was not able to
emerge "man-pages". The process aborted.
I added other gento
"Scrolling" my package db I found I have installed many automakes. Here
is the list:
drwxr-xr-x 2 root root 664 16 ott 10:36 automake-1.10
drwxr-xr-x 2 root root 936 9 feb 2006 automake-1.4_p6
drwxr-xr-x 2 root root 936 9 feb 2006 automake-1.5
drwxr-xr-x 2 root root 936 9 feb 2006 auto
Alex Schuster ha scritto:
econti writes:
Hi all
to-day I successfully updated Xorg (from 6.x to 7.x).
A little trouble only; on boot I receive the following error message:
Setting up kdm . . .
start-stop-daemon: option `--exec' requires an argument
Try `start-stop-daemon --help'
Alex Schuster ha scritto:
econti writes:
Hi all
to-day I successfully updated Xorg (from 6.x to 7.x).
A little trouble only; on boot I receive the following error message:
Setting up kdm . . .
start-stop-daemon: option `--exec' requires an argument
Try `start-stop-daemon --help'
Patrick Holthaus ha scritto:
Hey!
There's no way to set the DM in Xorg's config. The DM is set in
/etc/conf.d/rc (or was it /etc/rc.conf?).
It should be /etc/conf.d/xdm
DISPLAYMANAGER="kdm"
Patrick
It does not work! ;-(
DISPLAYMANAGER was already set to kdm
In my opinion the tr
Hi all
to-day I successfully updated Xorg (from 6.x to 7.x).
A little trouble only; on boot I receive the following error message:
Setting up kdm . . .
start-stop-daemon: option `--exec' requires an argument
Try `start-stop-daemon --help' for more information
*ERROR: could not start the Display M
Neil Bothwick ha scritto:
Hello econti,
So I should set INPUT_DEVICES="keyboard mouse" and VIDEO_CARDS="nv vga
fbdev" in my make.conf.
That looks reasonable, if you need fbdev.
But, what is the meaning of the minus sign preceding any of the video
card names?
Hi all,
I'm going to upgrade xorg. Following the "Migrating to Modular X HOWTO"
I ran:
grep Driver /etc/X11/xorg.conf and the output was:
Driver"kbd"
Driver"mouse"
Driver "vga"
Driver "nv"
Then I ran also
emerge --verbose --pretend xorg-x11
Here is part of the out
Neil Bothwick ha scritto:
On Tue, 11 Sep 2007 15:27:53 +0200, econti wrote:
A little question: how long does it take to complete the upgrade?
emerge genlop
emerge -upDN world | genlop -p
and see for yourself :)
It worked very well, but I received a lot of messages like these
Denis ha scritto:
After you "emerge --sync", run "emerge -NDpvu world" and post here the
output - the list of software your system wants to install/upgrade -
that should give us a better idea of what kind of an upgrade we're
dealing with here.
Here attached the outputs of both 'emerge -NDpvu w
Hi everybody, this is my first post on the list.
Well, I'm running a 2.6.15-gentoo-r7 2006.0 on a AMD64 machine.
Now I'd like to make a world upgrade. I know that I should run the
following commands:
emerge --sync
emerge --update --deep --newuse world
emerge --depclean
revdep-rebuild
A littl
52 matches
Mail list logo
