On 2013-02-10 3:43 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 10 Feb 2013 15:40:00 -0500, Tanstaafl wrote:
Here's what IUSE says are enabled for the currently installed lvm2:
readline +static +static-libs clvm cman +lvm1 selinux
IUSE shows the flags that were available to that
On 11/02/2013 14:09, Tanstaafl wrote:
On 2013-02-10 3:43 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 10 Feb 2013 15:40:00 -0500, Tanstaafl wrote:
Here's what IUSE says are enabled for the currently installed lvm2:
readline +static +static-libs clvm cman +lvm1 selinux
IUSE shows the
I'm prepping for updating some things I've been putting off, and I
noticed that lvm2 has some new use flags set, and I'm wondering why...
[ebuild U ] sys-fs/lvm2-2.02.97-r1 [2.02.88] USE=lvm1 readline
thin%* udev%* (-clvm) (-cman) (-selinux) -static* -static-libs* 1,166 kB
The two that
Am 10.02.2013 19:37, schrieb Tanstaafl:
I'm prepping for updating some things I've been putting off, and I
noticed that lvm2 has some new use flags set, and I'm wondering why...
[ebuild U ] sys-fs/lvm2-2.02.97-r1 [2.02.88] USE=lvm1 readline
thin%* udev%* (-clvm) (-cman) (-selinux)
On 2013-02-10 1:47 PM, Florian Philipp li...@binarywings.net wrote:
Am 10.02.2013 19:37, schrieb Tanstaafl:
I'm pretty sure that lvm2 was NOT built with either of these, but is
there a way to to tell what USE flags were used for the currently
installed package?
I guess you remember wrongly:
Am 10.02.2013 20:07, schrieb Tanstaafl:
On 2013-02-10 1:47 PM, Florian Philipp li...@binarywings.net wrote:
Am 10.02.2013 19:37, schrieb Tanstaafl:
I'm pretty sure that lvm2 was NOT built with either of these, but is
there a way to to tell what USE flags were used for the currently
installed
On Sun, 10 Feb 2013 14:07:38 -0500, Tanstaafl wrote:
So, the question becomes, why did these change? I do have /user on a
separate LVM partition, so, is this something I should worry about?
The static use flag builds a separate lvm.static all-in-one binary
more suitable for use in an
On 2013-02-10 2:57 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Sun, 10 Feb 2013 14:07:38 -0500, Tanstaafl wrote:
So, the question becomes, why did these change? I do have /user on a
separate LVM partition, so, is this something I should worry about?
The static use flag builds a separate
On Sun, 10 Feb 2013 15:40:00 -0500, Tanstaafl wrote:
Here's what IUSE says are enabled for the currently installed lvm2:
readline +static +static-libs clvm cman +lvm1 selinux
IUSE shows the flags that were available to that build, USE shows the
flags that were used.
--
Neil Bothwick
I
On Wed, May 17, 2006 at 11:29:47AM -0400, Timothy A. Holmes wrote
If anyone can suggest a good set of minimal use flags, I would be most
thankful
Here's mine. Note that some flags (mmx, sse, and sse2) are
cpu-specific. My machine is a general-purpose desktop.
USE=-* 3dnow X a52 aac alsa
On Wednesday 17 May 2006 23:48, Jonathan Chocron [EMAIL PROTECTED]
wrote about 'Re: [gentoo-user] New USE Flags, Emerge -e world -- Broken
systems -- PLEASE HELP':
Le Mercredi 17 Mai 2006 18:01, Jeremy Olexa a écrit :
I would start with the defaults, eg. leave USE= (blank) in make.conf
On Thu, 18 May 2006 06:48:44 +0200, Jonathan Chocron wrote:
Yes, USE= is a good start. However, one has to take into account that
portage adds use flags while going through the emerge process. For
example, if you install mysql in order to use it with amaroK, mysql
would, after that emerge be
Le Jeudi 18 Mai 2006 10:22, Neil Bothwick a écrit :
On Thu, 18 May 2006 06:48:44 +0200, Jonathan Chocron wrote:
Yes, USE= is a good start. However, one has to take into account that
portage adds use flags while going through the emerge process. For
example, if you install mysql in order to
Le Jeudi 18 Mai 2006 10:22, Neil Bothwick a écrit :
On Thu, 18 May 2006 06:48:44 +0200, Jonathan Chocron wrote:
Yes, USE= is a good start. However, one has to take into account that
portage adds use flags while going through the emerge process. For
example, if you install mysql in order
Hi folks - I have a major problem brewing here im afraid:
I have several systems that I had originally built with the Gentoo
installer disk -- As such they have a very large group of use flags, and
a fairly large genkernel. In wanting to lean them out and optimize them
for running, went in,
Hi,
Timothy A. Holmes wrote:
Hi folks - I have a major problem brewing here im afraid:
I have several systems that I had originally built with the Gentoo
installer disk -- As such they have a very large group of use flags, and
a fairly large genkernel. In wanting to lean them out and
On 5/17/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks - I have a major problem brewing here im afraid:
I have several systems that I had originally built with the Gentoo
installer disk -- As such they have a very large group of use flags, and
a fairly large genkernel. In wanting to
On 5/17/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks - I have a major problem brewing here im afraid:
I have several systems that I had originally built with the Gentoo
installer disk -- As such they have a very large group of use flags,
and
a fairly large genkernel. In
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Timothy A. Holmes wrote:
On 5/17/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks - I have a major problem brewing here im afraid:
I have several systems that I had originally built with the Gentoo
installer disk -- As such they have a
Jeremy Olexa wrote:
I would start with the defaults, eg. leave USE= (blank) in make.conf
and then start editing package.use to modify them from there. type
emerge --info to see ALL of the use flags that are being used
--
Jeremy Olexa
([EMAIL PROTECTED])
Office: EE/CS 1-201
CS/IT
Le Mercredi 17 Mai 2006 18:01, Jeremy Olexa a écrit :
Timothy A. Holmes wrote:
On 5/17/06, Timothy A. Holmes [EMAIL PROTECTED] wrote:
Hi folks - I have a major problem brewing here im afraid:
I have several systems that I had originally built with the Gentoo
installer disk -- As such
Use euse utility to query about USE flags.
emerge gentoolkit
euse -i flag1 [flag2 flag3]
or just euse for options.
On 5/8/06, Jerry McBride [EMAIL PROTECTED] wrote:
Would someone know what the following two USE flags do? latin and aio
It seems latin1 relates to mysql and aio relates to
On Tuesday 09 May 2006 04:58, Jerry McBride wrote:
The suggested equery wasn't much help
# equery belongs equery
[ Searching for file(s) equery in *... ]
app-portage/gentoolkit-0.2.2_pre4 (/usr/bin/equery)
app-portage/gentoolkit-0.2.2_pre4
(/usr/share/doc/gentoolkit-0.2.2_pre4/equery)
--
Bo
On Tue, 9 May 2006 20:06:53 -0600
Justin Findlay [EMAIL PROTECTED] wrote:
Not even the most dogged user is going to read through every flag and
decide if he wants it set or not.
I do and set specific sets of flags for each machine I run. It does take
about 30 min. and I do have to check for
Justin Findlay wrote:
On 5/8/06, JimD [EMAIL PROTECTED] wrote:
How would you recommend changing USE flags or making them better? You
should post suggestions to the devs. I think they need some fixing as
well. However, I haven't really thought much about it and so have no
real useful
Would someone know what the following two USE flags do? latin and aio
It seems latin1 relates to mysql and aio relates to slocate... But what do
they do?
Thank you, in advance, Jerry
--
gentoo-user@gentoo.org mailing list
On 5/8/06, Jerry McBride [EMAIL PROTECTED] wrote:
Would someone know what the following two USE flags do? latin and aio
It seems latin1 relates to mysql and aio relates to slocate... But what do
they do?
There's a neat little utility called equery (from gentoolkit) that
will give you
On Monday 08 May 2006 22:43, Justin Findlay wrote:
On 5/8/06, Jerry McBride [EMAIL PROTECTED] wrote:
Would someone know what the following two USE flags do? latin and aio
It seems latin1 relates to mysql and aio relates to slocate... But what
do they do?
There's a neat little utility
On 5/8/06, Jerry McBride [EMAIL PROTECTED] wrote:
The suggested equery wasn't much help, but grep-ing use.local.desc was a gold
mine. Thanks! I had already looked into use.desc and I stopped there and
posted my request for help. Why is it, that use.desc contains less
information about the use
Justin Findlay wrote:
Honestly, I think USE flags, as powerful as they are, are the
cruftiest part of Gentoo and could be so much more powerful and ought
to be so much less clumsy.
Justin
How would you recommend changing USE flags or making them better? You
should post suggestions to the
30 matches
Mail list logo
