OK, I didn't have the devfs loaded into the kernel, so the new version
boots past that point. However, the boot stops when it tries to load the
root filesystem.
warning, no fsck.ext3 found.
Error: mounting an ext2 partition failed on /dev/hda7 (a little different
wording), Bad superblock, etc
type
[EMAIL PROTECTED] wrote:
OK, I didn't have the devfs loaded into the kernel, so the new version
boots past that point. However, the boot stops when it tries to load the
root filesystem.
You shouldn't use devfs. It's obsolete. Which liveCD / stage are you
installing from? Which profile are
Hi Wes
What do you make of this? Do I need to run fsck?
I don't know whats wrong with your portage-tree, but you can try to get a
new one. Just move the olde tree away and sync:
# mv /usr/portage /usr/portage.old
# mkdir /usr/portage
# emerge sync
Sascha.
--
gentoo-user@gentoo.org
On Tuesday 25 October 2005 06:01, Francesco Talamona wrote:
DEVICE partitions
ARRAY /dev/md0 uuid=8ef83d67:79b230ba:6cc967c3:208b9224
AFAIK fd partition type is mandatory. Anyway is good to know that I can
avoid explicit node names in config files.
I'm not sure it's mandatory, but there
Hi,
On Tue, 25 Oct 2005 13:10:56 +1300
Nick Rout [EMAIL PROTECTED] wrote:
I am not sure if font embedding is possible in a .ps document.
Of course it is. I think people using laser printers would have
complained a lot otherwise...
-hwh
--
gentoo-user@gentoo.org mailing list
Whenever I boot up my machine, I get a message to the effect The Gentoo
system initialization scripts have detected that your system does not
support DEVFS or UDEV... I have included all of the appropriate kernel
options and emerged UDEV, hotplug, etc. per the Handbook. Anyone have
some hints as
i am install qemu and active kqemu
using ./configure --enable-kqemu to configure and make make install
than i use a win98.img to start qemu(using NAT )
qemu -hda win98.
img -m 256 -localtime
-enable-audio -user
-net
but in win98 can;t connect internet
did i qemu need some driver to support this
I know this can be a tough call on how to partition a drive, but I am
looking for some input.
My system will be used as for my own personal use, no server for
outside, though I may run a web server for private in home use, some
games, whatever I wish to play and experiment.
Users, mainly
On Tue, Oct 25, 2005 at 09:31:50PM +0800, wrote:
i am install qemu and active kqemu
using ./configure --enable-kqemu to configure and make make install
than i use a win98.img to start qemu(using NAT )
qemu -hda win98.img -m 256 -localtime -enable-audio -user-net
but in win98 can;t
On Tuesday 25 October 2005 04:44, sean wrote:
I know this can be a tough call on how to partition a drive, but I am
looking for some input.
My system will be used as for my own personal use, no server for
outside, though I may run a web server for private in home use, some
games, whatever I
I would strongly recomend putting the home directory on its own
partition. It then doesn't matter too much where you decide to mount
it, although some broken applications may assume the Linux convention
of using /home, so it is probably safest to preserve this and use a
sym link if you want to be
On 10/22/05, karlos
[EMAIL PROTECTED] wrote: hi, I have posted this a few days ago and I know its quite newbie, but I would like to use XChat and emerge .. :) One of the symptoms is that I can't ping the gentoo servers (
heanet.ie for example) or connect to XChat servers. I have tried to put in
Karsten Gebbert wrote:
the connection to the internet is fine I think, at least for
browsing and such.
[...]
I can NOT ping the gentoo servers at all, no xchat servers etc.
When I try to emerge, the address show in the terminal is always
1.0.0.0http://1.0.0.0. Same with Xchat servers. It
Hi,
not shure but maybe you can use the OBEX-Push Service of the Bluez Bluetooth
Package...
if your phone can handle BT.
Cheerz
NIC
-Original Message-
From: Keats [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 25, 2005 4:39 PM
To: gentoo-user@lists.gentoo.org
Subject:
On Mon, 24 Oct 2005 18:24:13 -0400 (EDT), Brett I. Holcomb wrote:
emerge --newuse world -p will catch all of it. Check the Gentoo docs.
No it won't. You need to add --deep and --update to catch everything:
emerge --deep --update --newuse --verbose --ask world
--
Neil Bothwick
My Go this
hi;
I upgraded to udev-070 recently (and now to udev-070-rc1).
Since then, I can't mount /mnt/cdrom properly.
Before, my /dev directory had a /dev/hdb, as well as /dev/hdb1,
/dev/hdb2 . Now, it only has /dev/hdb1, /dev/hdb2, but /dev/hdb is
no longer there. I still don't understand how
Hi,
On Tue, 25 Oct 2005 16:38:34 +0200
Keats [EMAIL PROTECTED] wrote:
i wonder how to get the pictures from my phone ?
i have it to work with irda via gammu/wammu but this software seems to
be able only to get numbers phone and sms from the phone...
What phone brand? Most phones support
Im trying to use mii-tool to configure
the NIC speed and duplex on a Dell 2850 server (currently auto negotiates and
has negotiated 100/half). The switch port is configured for 100/full. The Dell
2850 server uses the Broadcom chipset for the NIC and is a 10/100/1000 port.
Every time I try
On 10/24/05, Catalin Trifu [EMAIL PROTECTED] wrote:
Hi,I'm pretty new to log analyzers. Besides webalizer which got alittle bit old (still usefull nonetheless) i have no other experience.I've googled and found awstats and analog.If you would care to comment on this issue I would be grateful for
Hello,
I'm trying and googling and manpaging since weeks without success.
I'm having trouble with a custom application that requests the font
-adobe-helvetica-medium-r-normal--*-128-100-100-p-*-io8859-1.
128 is not present in /usr/share/fonts/100dpi/fonts.dir. By tweaking
the DisplaySize
sean wrote:
I know this can be a tough call on how to partition a drive, but I am
looking for some input.
My system will be used as for my own personal use, no server for
outside, though I may run a web server for private in home use, some
games, whatever I wish to play and experiment.
Budd, Tracy wrote:
Whenever I boot up my machine, I get a message to the effect The Gentoo
system initialization scripts have detected that your system does not
support DEVFS or UDEV... I have included all of the appropriate kernel
options and emerged UDEV, hotplug, etc. per the Handbook.
On Tuesday 25 October 2005 12.27, Mike Williams wrote:
On Tuesday 25 October 2005 06:01, Francesco Talamona wrote:
DEVICE partitions
ARRAY /dev/md0 uuid=8ef83d67:79b230ba:6cc967c3:208b9224
AFAIK fd partition type is mandatory. Anyway is good to know that I can
avoid explicit node
[EMAIL PROTECTED] wrote:
I’m trying to use “mii-tool” to configure the NIC speed and duplex on a
Dell 2850 server (currently auto negotiates and has negotiated
100/half). The switch port is configured for 100/full. The Dell 2850
server uses the Broadcom chipset for the NIC and is a
Hello, I'm upgrading my server from mysql 4.0 to 4.1 by following the
instructions here:
http://www.gentoo.org/doc/en/mysql-upgrading.xml
I noticed this piece of instruction:
emerge --config =mysql-4.1.micro_version
What does that do? From what I remember, I need to password the grant
table
On Tuesday 25 October 2005 18:02, Dan Johansson wrote:
Thanks for your input. Just one Question about setting the partition type
to 'FD' - should I do this for all Partitions or ?
Which ever partitions you are going to create raid arrays from, but I don't
imagine it would do any real harm to
when xserver closes there is mess on screen and i
loose any control over - just power button. Any ideas where to look? I
dont keep track but possibly this is after baselayout and udev upgrade.
Hmm.
It seems X f***s up your video memory, or something of this kind.
What video card and
Hello, I'm upgrading my server from mysql 4.0 to 4.1 by following the
instructions here:
http://www.gentoo.org/doc/en/mysql-upgrading.xml
I noticed this piece of instruction:
emerge --config =mysql-4.1.micro_version
What does that do? From what I remember, I need to password the grant
On Tue, Oct 25, 2005 at 10:10:40PM +0800, wrote:
now,i use qemu to emulate arch linux,and set arch to use dhcp
but always can;t connect to internet
my host system was on net,can connect to internet,thx
did qemu have some configure argument to enable or disable net?
thx
Shouldn't be.
Alle 19:39, martedì 25 ottobre 2005, Grant ha scritto:
Hello, I'm upgrading my server from mysql 4.0 to 4.1 by following the
instructions here:
http://www.gentoo.org/doc/en/mysql-upgrading.xml
I noticed this piece of instruction:
emerge --config =mysql-4.1.micro_version
What does that
Roy,
Thank you for your quick response. I am sure that #5 applies (as I have
seen another message to that effect). I am not sitting at the machine
now, but I will give this a try tonight. I love this forum! Thanks
again.
-Tracy
-Original Message-
From: Roy Wright
Sent: Tuesday, October
I was going to pipe in about that Neil, but ya beat me to it. I
like to shorten it and just type emerge -DNavu world , though.On 10/25/05, Neil Bothwick [EMAIL PROTECTED]
wrote:On Mon, 24 Oct 2005 18:24:13 -0400 (EDT), Brett I. Holcomb wrote: emerge --newuse world -p will catch all of it.Check
Hi All, I was looking for explanations about syslog-ng and got stucked
I was wondering why my /var/log/messages has 2.1 GB size and if I can
reduce this size or config it better; I am using default syslog-ng
config that was emerged by gentoo instalation.
Thanks, Allan
--
33 matches
Mail list logo