e of thoose dependancies are bogus.
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57
stay in the same file system:
$ stat br.log | grep 201
Access: 2018-02-07 22:59:51.746741788 +0100
Modify: 2016-08-16 15:34:40.742454976 +0200
Change: 2018-02-07 12:30:09.737085062 +0100
$ mv br.log z.log | grep 201
$ stat z.log
Access: 201
c-2017-r1/temp/environment'.
* Working directory:
'/Net/portage/portage/dev-texlive/texlive-basic-2017-r1/work'
(I have PORTAGE_TMPDIR=/Net/portage)
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Öst
Thelma:
> I just upgraded two system and did not run into any problem with
> dev-texlive/texlive-basic-2017-r1
>
> Try unmerging previous version if you have one installed and try again.
No, didn't have any, thanks for answering anyhow.
Rega
e than sysv-init, the above might not apply.
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57
Karl:
> Is this a bug or is there something wrong on my side ?
>
> * Messages for package dev-texlive/texlive-basic-2017-r1:
>
> * ERROR: dev-texlive/texlive-basic-2017-r1::gentoo failed (compile phase):
> * failed to build format texmf-dist/fmtutil/format.texlive-basic.c
sys-libs/libomp-5.0.1
sci-libs/xkaapi-2.2
both have the file
/usr/include/omp.h
Is there any way I can work around that problem ?
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57
Hello,
how do I make sure PERL_IMPLICIT_CONTEXT is defined when building perl ?
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57
at it thinks it's going to do with a dot-iso I *do* not know!
Don't know about Kate, but there is a file /etc/mailcap on my system,
see mailcap(4) [1] for details.
Regards,
/Karl Hammar
[1] "mailcap(4)" is a shorthand to indicate that there is a
dev rules are run singly, so
> at one point you will be trying to rename an interface with a name that
> is already in use.
...
Not everyone runs udev, and you don't need udev to change the eth name,
a few other choises are prese
eeded, why should I be more
or less forced to use it in every case ? No one is expecting me to run a
webserver on every systems, why then the heated arguments about this ?
It should be my own decision what to install, not someone elses.
Regards,
/K
27;t know how to get them back into a pdf though.
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57
I get a lot:
No such file or directory
when compiling, should I just wait a week or there anyone who knows
why ?
Also tried removing all USE flags, same result.
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94
abbed make from a
stage3 I had laying).
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57
Thanks, bad to know, I won't waste more time on that then.
> Your best bet is to install one version from source into /usr/local/,
> then find all the ways your system uses guile and take steps to always
> correctly identify the correct one.
...
I'll try to install 1
Thelma:
...
> How these programs decide which one own a Lock.file?
https://linux.die.net/man/1/mail-lock
https://en.wikipedia.org/wiki/File_locking#Lock_files
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742
rom which the node is
> booting.
...
You have to know which files are system dependent och which are common
to all your diskless nodes and that depends on how and if you are
using any shared directories/disks for the nodes.
Regards,
/Karl Hammar
---
able to properly autoconfigure
> without an xorg.conf file for 10% of users... then 20%... then 30%,
> etc. Today it works for just about everybody.
No for me, I still use a serial mouse with mman protocol.
Regards,
/Karl Hammar
--
>Section "InputDevice"
>Identifier "Mouse0"
>Driver "mouse"
>Option "Device" "/dev/whatever_you_use_currently"
>Option "Protocol" "MouseMan"
>EndSection
Thanks
1.1
lrwxrwxrwx 1 root root 20 Nov 5 12:49 /usr/lib64/libQt5Core.so.5.11 ->
libQt5Core.so.5.11.1
-rwxr-xr-x 1 root root 5351376 Nov 5 12:49 /usr/lib64/libQt5Core.so.5.11.1
So why isn't it found ?
Regards,
/Karl Hammar
---
$(usex alsa_cards_pcxhr pcxhrloader '')
$(usex alsa_cards_sscape sscape_ctl '')
)
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
>> So why isn't it found ?
...
> Sorry - you checked the cache. Does ldconfig -p show it?
>
> For me;
> ldconfig -p | grep libQt5Core.so.5
> libQt5Core.so.5 (libc6,x86-64, OS ABI: Linux 3.17.0) =>
> /usr/lib64/libQt5Core.so.5
Same:
# ldconfig -p | grep libQt
>
> Found this at <https://bbs.archlinux.org/viewtopic.php?id=232682>:
> "Qt 5.10 uses the renameat2 system call which is only available
> since kernel 3.15."
Ok, 3.12.8 here, I'll see if an upgrade
tested), but has anyone tried it the other way ?
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
ds:
$ ls -1 portage/sys-devel/gcc/
...
gcc-5.4.0-r4.ebuild
gcc-5.4.0-r5.ebuild
gcc-5.4.0-r6.ebuild
gcc-6.4.0-r1.ebuild
gcc-6.4.0-r3.ebuild
gcc-6.4.0-r4.ebuild
gcc-6.4.0-r5.ebuild
gcc-6.5.0.ebuild
...
so that means I'm on my ow
ike:
# cat /proc/cmdline
BOOT_IMAGE=18/3 ro root=902 md=2,/dev/sda2,/dev/sdb2 raid=noautodetect
# ls -l /dev/md2
brw-rw 1 root disk 9, 2 Apr 12 2015 /dev/md2
#
Regards,
/Karl Hammar
---
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
n get pin status with
statserial /dev/ttyS9
Connect a null modem cable from one port to the next
open two terminals
in first term. do cu -l /dev/ttyS8 -s 9600
in second term. do cu -l /dev/ttyS9 -s 9600
or similar, and see if you can talk with yourself.
Regards,
/Karl Hammar
sn't have its own package, and isn't
> discoverable via eix or pfl... Is there an ebuild hidden somewhere?
> Or do I need to hunt it down by hand?
https://packages.debian.org/source/stretch/statserial
Regards,
/Karl Hammar
Is there a reason why thoose two doesn't have a matching
latest versions:
https://packages.gentoo.org/packages/virtual/perl-Time-Local
https://packages.gentoo.org/packages/perl-core/Time-Local
I get:
[ebuild N] virtual/perl-Time-Local-1.250.0-r1
...
[blocks B ]
I sometimes get:
Unable to unshare: EINVAL
when "emerge"-ing packages.
Does anybody know what that is about ?
Regards,
/Karl Hammar
GENTOO_LINUX_PORTAGE ("Gentoo Linux" ->
> "Gentoo Linux Support" -> "Select options required by Portage features") will
> automatically select them.
emerge-ing seems work, can't I just ignore the message (I don't need
that namespace elsewhere in the system) ?
Regards,
/Karl Hammar
e from, so start with
price range.
Regards,
/Karl Hammar
73/Lexmark-C2325dw#specs
It looks like many (most?) lasers today can use postscript,
lpr and port 9100. So the most basic form of printing would be
nc host 9100 < postscript_file
Regards,
/Karl Hammar
crw-rw 1 root users 99, 0 Jan 18 2016 /dev/parport0
Regards,
/Karl Hammar
he _FIFO thing to
off or setting parport dma to on in bios.
Regards,
/Karl Hammar
ys/dev/parport» or equivalent (to compare
> with the official documentation) ?
Thoose files looks fine, no problem there.
Regards,
/Karl Hammar
d
*
...
Why does the install fail, I have no problem creating that file by hand
(as in touch ), why does a simple thing like copy fail ?
Have it something with sandboxing to do ?
How do I go arond this ?
Regards,
/Karl Hammar
#x27;t know how to solve this problem, but it has already been reported:
>
> https://bugs.gentoo.org/686852
Thanks for the info.
In the meantime you can walk around the problem by not using the
sandbox like:
FEATURES="-sandbox -usersandbox" emerge -aqv sys-apps/dtc
Regards,
/Karl Hammar
Karl Hammar:
> For testing purposes, I would like to install older compilers,
> e.g. testing with older kernels.
>
> I have tried to install e.g. gcc-5.4.0-r4, gcc-4.9.4, and
> gcc-3.4.6-r2.ebuild (package.unmask is upd. for theese), but it fails.
I have found out that I can
R_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
Regards,
/Karl Hammar
, try to cd to your
var/lib/mlocate directory and then do a locate -d mlocate.db ...
Can you read your db file with something else, e.g. md5sum,
to verify that you can read it in some ways.
Regards,
/Karl Hammar
hings I see that things are
last updated 2005.
After some searching I find:
https://sourceforge.net/p/jamin/mailman/jamin-devel/?viewmonth=201304
which points me to a git repo. Checking out it, and compiling gets me a
jamin that doesn't segfaults.
$ jamin -V
jamin 0.98.9
///
Regards,
/Karl Hammar
From net-nds/rpcbind-1.2.5/temp/build.log:
x86_64-pc-linux-gnu-gcc -DPACKAGE_NAME=\"rpcbind\" [...] -c -o src/security.o
src/security.c
src/security.c:27:10: fatal error: rpcsvc/rquota.h: No such file or directory
#include
Where can I find that header file ?
Regards,
/Karl Hammar
ave it???
$ fgrep quota.h /var/db/pkg/sys-libs/glibc-2.29-r2/CONTENTS
obj /usr/include/sys/quota.h 984635f29e66459151ac7ea2d48d0db4 1563571698
$ fgrep quota.h /var/db/pkg/sys-fs/quota-4.04-r2/CONTENTS
$
Is there anyone who knows ?
Regards,
/Karl Hammar
Francesco Turco:
> On Sat, Jan 11, 2020, at 11:22, k...@aspodata.se wrote:
> > Soo, why don't I have it???
>
> Did you enable the "rpc" USE flag for sys-fs/quota?
Great, that did the trick, thanks.
Regards,
/Karl Hammar
Is there a way to install qt4 without resorting to make a new
installation ?
This code requires qt4:
https://github.com/thliebig/openEMS-Project
Regards,
/Karl Hammar
uitable Qt version "5.13.2" from /usr/bin/qmake, this code
requires Qt 4.x
Call Stack (most recent call first):
CMakeLists.txt:124 (FIND_PACKAGE)
(That message is a little confusing, it finds a vtk which it doesn't
accept, but it is using it ???)
Perhaps that triggers the else part in line 117-119.
Regards,
/Karl Hammar
.8.0
-rwxr-xr-x 1 root root 6886896 Nov 29 00:29 /usr/lib64/liblapack.so.3.8.0
Regards,
/Karl Hammar
Available BLAS/CBLAS (lib) candidates:
(none found)
Available BLAS/CBLAS (lib64) candidates:
[1] reference *
still same problem.
recompiling octave, same problem.
recompiling octave with static-libs, same problem.
Regards,
/Karl Hammar
Regards,
/Karl Hammar
libapack.so.0 pointing to
> libapack.so.3 and see if octave runs.
>
> Best to remove that more or less right away but it might get you through a
> test period waiting for the ebuild to get fixed.
Yes, that short term solution works.
Regards,
/Karl Hammar
.2.1-r4
Latest version installed: [ Not Installed ]
Size of files: 4694 KiB
Homepage: http://www.netlib.org/lapack/index.html
Description: FORTRAN reference implementation of LAPACK Linear Algebra
PACKage
License: BSD
Regards,
/Karl Hammar
oking for the problem. If anybody with some kernel knowledge could
> make any suggestions, I'd be very grateful.
What happens if you set /dev/console to be /dev/ttyS0, i.e. make sure
that tty1 is the only one using the first virtual console.
Regards,
/Karl Hammar
*** Waiting for unfinished jobs
* installing *source* package ?<80><98>codetools?<80><99> ...
** package ?<80><98>codetools?<80><99> successfully unpacked and MD5 sums
checked
** using non-staged installation
///
Full build log is here:
http://aspodata.se/tmp/build.log
Regards,
/Karl Hammar
Jack:
> On 2021.04.03 07:15, k...@aspodata.se wrote:
...
> > make[1]: *** Waiting for unfinished jobs
> Try running with -j1
...
I already have:
EMERGE_DEFAULT_OPTS="--jobs 1 ...
in make.conf. Don't know why it still wants to run in parallell.
Regards,
/Karl Hammar
ld re-
> start the build more or less where it failed.
$ cp -a ...
$ cd ...
$ make -j1
...
$ echo $?
0
It builds without failure in that case.
Regards,
/Karl Hammar
EG, TIFF, NLS
Options enabled: shared R library
Capabilities skipped:cairo, ICU
Options not enabled: shared BLAS, R profiling, memory profiling
Recommended packages:yes
# make -j4
...
make[1]: Leaving directory '/home/sys/R-4.0.4/work/R-4.0.4/tests'
you should 'make docs' now ...
make[1]: Entering directory '/home/sys/R-4.0.4/work/R-4.0.4/doc'
make[1]: Entering directory '/home/sys/R-4.0.4/work/R-4.0.4'
WARNING: ignoring environment value of R_HOME
make[1]: Leaving directory '/home/sys/R-4.0.4/work/R-4.0.4'
WARNING: ignoring environment value of R_HOME
WARNING: ignoring environment value of R_HOME
Segmentation fault
make[1]: *** [Makefile:77: NEWS.3.rds] Error 139
make[1]: *** Waiting for unfinished jobs
make[1]: Leaving directory '/home/sys/R-4.0.4/work/R-4.0.4/doc'
...
Regards,
/Karl Hammar
limited unlimited bytes
STACK max stack size 8388608 unlimited bytes
Regards,
/Karl Hammar
ers/video/console/vgacon.c etc. can give some ideas
what one is up against.
Regards,
/Karl Hammar
ent fault in the vincinity of
NEWS.2.rds, NEWS.rds, base.Rdts, and methods.Rdts. The first
two is mentioned in doc/Makefile, and the latter two in
src/library/Makefile. Going into doc and src/library and makeing
thoose four works without any errors.
Regards,
/Karl Hammar
libs a global flag on your system? That may explain why your build is
> using more memory than mine.
yea, it was a try to make c++ programs to behave under changing
compiler and library situations. Seems that some such programs
don't want to be built statically so they break whenever some "random"
lib changes.
Regards,
/Karl Hammar
use:
raw ethernet frames
netbeui
samba
ethertalk (appletalk)
http://netatalk.sourceforge.net/
ipx (netware)
ftp://ftp.koansoftware.com/public/opensource/mars_nwe/mars_nwe-0.99.pl21.tgz
I have previously (in the 90's) used mars, worked great.
Regards,
/Karl Hammar
em cable and
run kermit or somthing on the MS-Win side and add a getty (I've used
mgetty) handling the serial port on the linux side.
Regards,
/Karl Hammar
Karl:
...
> About the original question. Here what a few thing I dig up.
> https://www.amazon.com/Laplink-High-Speed-Transfer-Cable-PCmover/dp/B0093H83DW
...
With
Secure ms-win box - usb laplink cable - dummy ms-win box - tcp/ip -
linux box
you could be able to do it with usb.
Possibl
pLink (type) cable or USB On The Go gadget cables
> could present as a multi-megabit serial interface.
You can always build yourself two pairs of RS232 to RS422 converters
and see where the limit on your serial ports are. You can even try with
other deserializes/serializers. What speed do you want ?
Regards,
/Karl Hammar
o if the link led lights up, but the communication fails,
something between the mii's (the electronics, the chips)
https://en.wikipedia.org/wiki/Media-independent_interface
is faulty and it is with high probability that the cable is faulty.
Regards,
/Karl Hammar
re.
...
You can use https://letsencrypt.org/ instead of a self-signed cert:
Let's Encrypt is a free, automated, and open certificate authority
brought to you by the nonprofit Internet Security Research Group (ISRG).
It was pretty simple to get it to work with
https://github.com/diafygi/acme-tiny
Regards,
/Karl Hammar
ant the whole internet to know
> about.
Just use a celf-certified cert and add an exeption in the web browser,
or set up your own CA, (I don't know how) and distribute its cert.
Regards,
/Karl Hammar
One could add a check to make sure that the downloaded crt is sensible.
> * LetsEncrypt verifies your identity over plain HTTP (like every otherÂ
> commercial CA), so it's all security theater in the first place.
...
Ack.
Regards,
/Karl Hammar
Karl:
> Michael Orilitzky:
Sorry, I mistyped, it should be: Peter Humphrey
> ...
> > * The LetsEncrypt certificates expire after three months, as opposedÂ
> > to 10+ years for a self-signed certificate. You're supposed toÂ
> > automate this... by running a sc
except possible to mess
up my preset dev directory. Also I have sys-fs/static, even if I install
udev, it woun't start, and I don't need yet another deamon running
doing nothing for me.
Is there possible to resurrect the old drivers ?
Or is there another way to solve this ?
Regards,
/Karl Hammar
'
* xorg-server-1.18.4.ebuild, line 8: Called inherit 'xorg-2' 'multilib'
'versionator' 'flag-o-matic'
* ebuild.sh, line 290: Called die
* The specific snippet of code:
* [[ -z ${location} ]] && die &q
test/what-is-libinput.html
plainly says:
libinput is an input stack for processes that need to provide events
from commonly used input devices.
and serial mice isn't common any longer, and udev has never (from what I
know) cared about serial mice.
Regards,
/Karl Hammar
ancy.
If you have a solution without udev, please tell me.
Regards,
/Karl Hammar
Neil Bothwick:
...
> You need to grab xorg-2.eclass from the git history and put it in your
> overlay. Be prepared to repeat this process with other files.
Thanks, found them.
Regards,
/Karl Hammar
forced to
go around udev. Can't programs be compiled without udev today...
Udev should be an optional deamon, utilized when the local
administrator decides to do so. I don't want things to automatically
pop up unless I say so.
Regards,
/Karl Hammar
end I get a system that is harder to program on the
host side for no gain other than that +5V is provided by usb.
Regards,
/Karl Hammar
Karl Hammar:
> Dr. Canek Peláez Valdés:
...
> > My point is that it's not his call; it's the call of the developers of the
> > software that he decided to use.
>
> Poeple write whatever software they want to or are paid to do.
> It is my call if I want to us
interesed in using software that
doesn't do anything for me. The problem of device nodes and permission
is already solved, I don't need pop-ups, I don't want automounting.
Serial ports have been working for the last 70 years or more.
So stop this, I never asked about udev or how to make that work.
You are answering the wrong question.
Regards,
/Karl Hammar
ut/event23 c 13 87
chown $USER /dev/input/event23
or
mknod -m 666 /dev/input/event23 c 13 87
3. fiddle with udev so it does what it should, don't know how
Regards,
/Karl Hammar
:733/1123(ro)(G)-- --dict:0/20(G)-- --dict:101/200(L)--
Current allocation mode is local
Last OS error: No such file or directory
===
I can work around the problem by using ps2ps after the dvips step.
Regards,
/Karl Hammar
Alex:
> I've got CONFIG_ELF_CORE and CONFIG_COREDUMP both configured to yes in
> my kernel.
>
> When I do
>
> $ uclimit -H -c
>
> , it tells me "unlimited".
>
> But still, no dump. :-(
>
> What am I missing?
Have you tried:
$ man gcore
$ man 5 core
Regards,
/Karl Hammar
-switch-how-to-put-device-in-pairing-mode-ez-and-ap-mode-
https://dazzblingproducts.com/troubleshooting/
Regards,
/Karl Hammar
org/) doesn't
handle bluetooth classic, unless you build bluez with
--enable-deprecated configure option.
Also, bluez has dropped direct /dev file access for users, you
have to set up and go through dbus regardless wether you like it
or not.
Regards,
/Karl Hammar
e jack, both 3.5mm.
How do one know if it is a TRS or TRRS variant without opening the
case ?
Maybe it is a trrs jack since when I inserts a trs cable (to speaker)
the ouput sound whines a lot, mostly masking the intended sound.
I found some specs in [2] and [3].
Regards,
/Karl Hamma
How do I run emerge so that when buildin/emerging the package another
PATH is used ?
Regards,
/Karl Hammar
og
Error: not found: latex, makeindex, pdflatex, kpsewhich
# which latex
/usr/local/texlive/2022/bin/x86_64-linux/latex
#
Something seems to set its own PATH.
Regards,
/Karl Hammar
hen dropping to the portage user? Try
> modifying PATH in /etc/portage/bashrc â note that this file is sourced
> multiple times during the build, see
> <https://wiki.gentoo.org/wiki//etc/portage/bashrc>.
Thanks, that solved it.
Regards,
/Karl Hammar
lled, please do not touch /dev,
if you want you can leave suggestions in some file.
Regards,
/Karl Hammar
up emerge to retry the linking and
continue from there ?
Regards,
/Karl Hammar
ild merge
Thanks, that did what I asked about.
Regards,
/Karl Hammar
dependencies done!
net-libs/nodejs-14.19.0 pulled in by:
www-client/firefox-91.9.0 requires >=net-libs/nodejs-10.23.1
So, why don't emerge build the other 100'ish packages ?
Last time I did emerge nodejs, must I run emerge @world
and let that fail first ?
Regards,
/Karl Hammar
#x27;t continue with
the next one (using --keep-going), so why is nodejs blocking everything
else ???
So I removed firefox from world, now the rest is building. I'll solve
the firefox/nodejs thing later.
Regards,
/Karl Hammar
/python2.7/pip
-rwxr-xr-x 1 root root 364 May 5 2019 /usr/lib/python-exec/python3.6/pip
or anything else ?
Regards,
/Karl Hammar
iner-20220506/work/pdfminer.six-20220506/samples
so any make command would fail.
I could possible install it USE=-examples (cannot test just now since
emerge is busy), but is there any other way to solve this ?
Regards,
/Karl Hammar
dropping the debug
> USE-flag will probably reduce the amount of memory it needs somewhat.
> You could also add more swap, or look into zswap¹ or zram².
Dropping debug and adding swap solved it, thanks.
Regards,
/Karl Hammar
Neil Bothwick:
> On Wed, 13 Jul 2022 10:40:34 +0200 (CEST), k...@aspodata.se wrote:
...
> > $ pip
> > pip: no python-exec wrapped executable found in /usr/lib/python-exec.
...
> You may need to re-emerge pip if the last file you have is for python3.6.
...
Thanks, that solved i
# grep BLK_DEV_SD= /boot/config.production
CONFIG_BLK_DEV_SD=y
# grep CONFIG_SATA_AHCI /boot/config.production
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
You must also compile in the filesystem used for /
(perhaps it is ext4).
# grep CONFIG_EXT4_FS= /boot/config.production
CONFIG_EXT4_FS=y
Every time you change the kernel you have to rerun lilo.
Regards,
/Karl Hammar
ing irrelevant doesn't mean much if they
don't deliver what you want.
Regards,
/Karl Hammar
e busybox.
It is also possible to use sys-fs/static-dev, if you want to opt
to not use udev.
Regards,
/Karl Hammar
1 - 100 of 178 matches
Mail list logo
