directories
and now waiting for your syntax check and approval for migration to
Grass7.
Yann
--
Yann Chemin
www.csu.edu.au
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
www.csu.edu.au
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass
, Advanced, Dev).
Yann
On 12 January 2011 22:35, Martin Landa landa.mar...@gmail.com wrote:
Hi,
2011/1/12 Yann Chemin yann.che...@gmail.com:
yeah no problem to move to small caps, initial reason was that it was
Family names abbreviation...
+1 to avoid them too
please do.
Other issue, probably
, at 10:00 AM, grass-dev-requ...@lists.osgeo.org wrote:
Message: 7
Date: Wed, 12 Jan 2011 12:53:21 +0100
From: Martin Landa landa.mar...@gmail.com
Subject: Re: [GRASS-dev] Re: [GRASS-SVN] r44977 - in grass/trunk:
gui/wxpython/xml imagery imagery/i.evapo.PT
To: Yann Chemin yann.che
landa.mar...@gmail.com wrote:
2011/1/12 Yann Chemin yann.che...@gmail.com:
2011/1/12 Yann Chemin yann.che...@gmail.com:
yeah no problem to move to small caps, initial reason was that it was
Family names abbreviation...
before adding new and new modules I would really like some discussion
on ML
oh well Martin, you are also right about the parameter names, too
abbreviated, steeper learning curve.
I see you already corrected what you mentioned was not the convention
over the night. thanks
On 13 January 2011 09:27, Yann Chemin yann.che...@gmail.com wrote:
Hi Martin I agree with all
/ is down?
On Jan 12, 2011, at 6:53 AM, Martin Landa wrote:
Hi,
2011/1/12 Yann Chemin yann.che...@gmail.com:
(Thx, did not read that one yet, so did now)
I would tend to agree with Jarek too.
The use of Module keywords should facilitate the three layers
mentioned, and maybe special keywords
Hello,
It works in Linux.
Yann
On 16 December 2010 11:36, Yann Chemin yann.che...@gmail.com wrote:
Hello list,
we are trying to get through i.atcorr for Aster and we seem to hit a
wall of NULL values.
Anybody had success so far with Aster in i.atcorr?
For Aster Band 1 in Coleambally NSW
Martin
--
Martin Landa landa.martin gmail.com * http://geo.fsv.cvut.cz/~landa
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
www.csu.edu.au
thanks in advance for any helps and hints and forgive me for my bad
English.
with best regards,
psr
--
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
www.csu.edu.au
on the allowed name to run the module with
selected parameter name?
Thank you,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
+1
Yann Chemin
www.csu.edu.au
On 17/12/2010, at 7:15, GRASS GIS t...@osgeo.org wrote:
#1241: Change default calculation in r.sun to include topographic shadowing
-+--
Reporter: newcombttg | Owner: grass
NULL values.
We prepared Band 1 with i.aster.toar, checked visually for values in
TOA rad and TOA ref, they were OK prior to input to i.atcorr.
Yann
--
Yann Chemin
www.csu.edu.au
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http
Hello
Could somebody try to open the dialog box of I.aster.toar
While there is no problem on Linux Debian there is a report of crash
on launching the dialog box in Windows.
Grass7 svn daily snapshot latest is having the module.
Thank you
Yann
Yann Chemin
www.csu.edu.au
(ialt) value from
parameter file and make it a separate input value to clarify the issue
value Vs raster input file. Likewise for visibility (ivis).
Yann Chemin
www.csu.edu.au
On 09/11/2010, at 4:43, Markus Neteler nete...@osgeo.org wrote:
On Mon, Nov 8, 2010 at 10:28 AM, svn_gr...@osgeo.org
Hi Martin
I am going to office now
Can you send me your input files and script
Thank you
Yann
Yann Chemin
www.csu.edu.au
On 09/11/2010, at 7:23, Martin Landa landa.mar...@gmail.com wrote:
2010/11/8 Martin Landa landa.mar...@gmail.com:
when playing with i.atcorr, input raster maps are very
, global unique value is taken in the process of
inversion model re-definition.
So this seem justified to use.
On 09/11/2010, Yann Chemin yann.che...@gmail.com wrote:
From what I can read if no file descriptor is found then do not
convert meters to km
If no file descriptor is found it should fall
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
://geo.fsv.cvut.cz/~landa
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
Hello,
is there a way (svn copy?) to carry forward the add-ons svn changes
from the old i.landsat.toar into v7?
Thank you,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
something reading the new types?
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
defaults unless you have some plan to ensure that the documentation
generated by --html-description isn't bogus.
--
Glynn Clements gl...@gclements.plus.com
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
Yann Chemin
Senior Spatial Hydrologist
www.icwater.org
On 13/10/2010, at 18:23, Hamish hamis...@yahoo.com wrote:
Yann wrote:
I would like to include i.landsat.toar in GRASS7.
I believe this will bring the necessary complement to
i.atcorr and the subsequent i.albedo/i.vi/etc that are part
-linux-gnu/demolocation
not available
make: *** [i.landsat.toar.tmp.html] Error 1
rm i.landsat.toar.tmp.html
---
What is the reason?
Thank you,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
has
changed from v6 to v7.
On 14 October 2010 14:46, Yann Chemin yann.che...@gmail.com wrote:
Hello,
I have been able to compile all the i.landsat.toar C code so far in
v7, but it does something strange with the html (old description.html
renamed i.landsat.toar.html in v7
, and they are tested
for a return value.
How would you rewrite that initial code within version 7?
Thank you,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
grass-dev@lists.osgeo.org
Thank you Glynn for those nice explanations
Yann
On 13 October 2010 16:27, Glynn Clements gl...@gclements.plus.com wrote:
Yann Chemin wrote:
some confusion you may clarify.
Looking into some v6 to v7 coding translation, how would you test for
readability of raster cell header in v7
from
to make things faster (and maybe more consistent), it may just be
better to have lat and long rasters as input to r.sun, instead of
repeatingly calling for a function to convert them.
___
grass-dev mailing list
grass-dev@lists.osgeo.org
Maybe this could help to fasten the work with minimum effort? Google
to Cholesky decomposotion returned positives on it.
ScaLAPACK is a library of high-performance linear algebra routines for
distributed-memory message-passing MIMD computers and networks of
workstations supporting PVM and/or MPI
/509
--- On Fri, 4/30/10, Yann Chemin yann.che...@gmail.com wrote:
From: Yann Chemin yann.che...@gmail.com
Subject: [GRASS-dev] netbook and entering GRASS (wxpython gui + grass7svn)
To: GRASS developers list grass-dev@lists.osgeo.org
Date: Friday, April 30, 2010, 9:07 PM
Hello list,
when
Hello list,
it seems that g.region zoom= does not work in grass 7 SVN (yesterday's update)
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http
.
Switching to text mode now.
Hit RETURN to continue...
Unable to create temporary directory! Exiting.
-
Regards,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
that is v6.4.rcx in actual Debian
Sid. The Tcl/Tk GUI maximizes to the screen height.
Thank you,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http
Hello list,
After extracting features from an image, I would like to shrink the
computational region only to the smallest area including non-null
pixels.
is there a module made for that, or should it be created?
Regards,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research
Hello list,
I am looking for summing up all pixels of a raster into one value
(output to stdin).
r.sum was supposed to do it earlier. However, it does not appear in SVN...
Could anyone help me locating it, it may have been absorbed into another module.
Thank you,
Yann
--
Yann Chemin
Senior
...@gclements.plus.com
~Jordan
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
.svn/scripts/r.reclass.area,
line 119, in main
grass.message(_(Generating output raster map
$outfile...) % outfile)
TypeError: not all arguments converted during string
formatting
(Tue Apr 13 08:20:01 2010) Command finished (5 sec)
-
--
Yann Chemin
Senior Spatial Hydrologist
(*targs, **kargs)
File /usr/local/grass-7.0.svn/scripts/r.fillnulls, line
68, in cleanup
grass.run_command('g.remove', flags = 'f', vect =
vecttmp)
NameError: global name 'vecttmp' is not defined
(Mon Apr 12 14:38:52 2010) Command finished (0 sec)
--
Yann Chemin
Senior Spatial Hydrologist
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740 7019
___
grass-dev mailing list
grass-dev
Hello,
I got a reservoir in lidar data imported and splined interpolated and
would like to generate volume/area and volume/depth estimations.
Anybody could direct to modules that can help?
Thank you,
Yann
--
Yann Chemin
Senior Spatial Hydrologist
www.csu.edu.au/research/icwater
M +61-4-3740
+1 for OpenCL
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
2009/6/22 Hamish hamis...@yahoo.com:
Yann Chemin wrote:
Made a map in Australia, and wanted to use r.horizon on it.
Nothing special, a srtm map and default conditions.
This is the output:
(Sat Jun 20 16:51:57 2009)
r.horizon elevin=dem...@permanent horizonstep=30 bufferzone=200
Hello,
Made a map in Australia, and wanted to use r.horizon on it.
Nothing special, a srtm map and default conditions.
This is the output:
(Sat Jun 20 16:51:57 2009)
r.horizon elevin=dem...@permanent horizonstep=30 bufferzone=200
maxdistance=2000 horizon=horangle
G_set_window(): Illegal latitude
/mailman/listinfo/grass-dev
--
Yann Chemin
Mobile: +33 (06) 10 11 39 26
Home: +33 (02) 35 27 08 20,
Address: Gite de Mortagne,
16 rue de la chenaie,
76110 Bec de Mortagne,
France
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr
/grass-dev
--
Yann Chemin
Mobile: +33 (06) 10 11 39 26
Home: +33 (02) 35 27 08 20,
Address: Gite de Mortagne,
16 rue de la chenaie,
76110 Bec de Mortagne,
France
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr/
___
grass-dev
Thanks Martin, i forgot the wxGUI menu !
2009/6/19 Martin Landa landa.mar...@gmail.com
Hi,
2009/6/19 Yann Chemin yann.che...@gmail.com:
Shall we rename it i.eb.soilheatflux?
Any proposition please.
Not sure, sorry I am not expert here. I just find the current name very
cryptic.
i.eb
modules to follow SUBMITTING rules. See r37961.
Martin
-
Martin Landa landa.martin gmail.com *
http://gama.fsv.cvut.cz/~landahttp://gama.fsv.cvut.cz/%7Elanda
--
Yann Chemin
Mobile: +33 (06) 10 11 39 26
Home: +33 (02) 35 27 08 20,
Address: Gite de Mortagne,
16 rue de la chenaie,
76110 Bec de
Hello list,
Could you please help,
I have updated i.modis.qc, and it compiles well.
However, the html file somehow makes an error on compilation of the module.
The compilation fails because of that one.
Is there a way to know where in the html file it stops?
Thanks,
Yann
--
Yann Chemin
Mobile
i.modis.qc.tmp.html
---
Thanks a lot,
Yann
2009/4/5 Martin Landa landa.mar...@gmail.com:
Hi,
2009/4/5 Yann Chemin yann.che...@gmail.com:
Could you please help,
I have updated i.modis.qc
OK, found it, sorry for the trouble.
it was a duplicate line from a copy/paste that got itself in the wrong place
input1-answer = _(modland_qa_bits);
it was before
input1 = G_define_option();
Thanks,
Yann
2009/4/5 Yann Chemin yann.che...@gmail.com:
Hello Martin,
yes, since I just copied
://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
Mobile: +33 (06) 10 11 39 26
Home: +33 (02) 35 27 08 20,
Address: Gite de Mortagne,
16 rue de la chenaie,
76110 Bec de Mortagne,
France
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr
OK thanks Martin.
2009/4/5 Martin Landa landa.mar...@gmail.com:
Hi,
2009/4/5 Yann Chemin yann.che...@gmail.com:
OK, found it, sorry for the trouble.
it was a duplicate line from a copy/paste that got itself in the wrong place
input1-answer = _(modland_qa_bits);
it was before
input1
this
hurdle. Of course, a straight question coming from this would be: is
there a national GIS vocabulary accepted already? If yes, that is a
good starting point.
sorry, that is a bit long,
Yann
--
Yann Chemin
Mobile: +33 (06) 10 11 39 26
Home: +33 (02) 35 27 08 20,
Address: Gite de Mortagne,
16 rue de
i.atcorr which was openMP'ed by Yann Chemin
recently (have added him in CC). I should have tested it already but
didn't have the time yet... It's amazing - only few lines of changes to
get openMP enabled!
--
Yann Chemin
Mobile: +33 (06) 10 11 39 26
Home: +33 (02) 35 27 08 20,
Address: Gite
://wms.jpl.nasa.gov/wms.cgi [4037035] -
/media/TeraByte/GRASSDATA/wms_download/wms_global_mosaic__863.geotiff
[1]
All tiles downloaded successfully
execl() failed: File name too long
Segmentation fault
ERROR: r.in.gdalwarp failed
Any idea what is going on?
Thanks,
Yann
--
Yann
Hello again,
On SVN, trying to qquery a thematic raster.
--
Traceback (most recent call last):
File /usr/local/grass-7.0.svn/etc/wxpython/gui_modules/ma
pdisp_window.py, line 992, in MouseActions
self.OnLeftUp(event)
File
:07.81346
Raster map irrigation_6733.0 not found
irrigation_6733.0 nothing removed
(Mon Feb 2 16:44:56 2009) Command finished (0 sec)
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http
Hi Paul,
Thanks for your comments.
I go back to the code and to the books then.
Yann
2008/10/27 Paul Kelly [EMAIL PROTECTED]:
Hi Yann,
Thought I would comment too so you know it is not just Glynn who sees there
is a problem here.
On Mon, 27 Oct 2008, Yann Chemin wrote:
Hello Glynn
/27 Paul Kelly [EMAIL PROTECTED]:
Hi Yann,
Thought I would comment too so you know it is not just Glynn who sees there
is a problem here.
On Mon, 27 Oct 2008, Yann Chemin wrote:
Hello Glynn,
since I rewrote the code, and tested it, I know quite much what I do
with the bitshifts, the image
with -Wall and read on bitshift compilation
warnings across platform,
you are still running on Windows platform, aren't you?
Thanks,
Yann
2008/10/26 Glynn Clements [EMAIL PROTECTED]:
Yann Chemin wrote:
maybe it is wiser indeed to change to = for platform/compiler
stability as it forces
;
or:
pixel = 2;
instead?
--
Glynn Clements [EMAIL PROTECTED]
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr/
___
grass-dev mailing list
Hello again Glynn,
maybe it is wiser indeed to change to = for platform/compiler
stability as it forces the variable to be updated.
Somehow it is not necessary on my system (Debian/Sid).
Thanks,
Yann
2008/10/24 Yann Chemin [EMAIL PROTECTED]:
Hello Glynn,
It should be standard bit shift , so
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr/
___
grass-dev mailing list
grass-dev
we shouldn't sweep them under the carpet
as NULLs. They are distinct- mathematical null vs. spatial null.
Hamish
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
PROTECTED]
http://lists.osgeo.org/mailman/listinfo/grass-user
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr/
___
grass-dev mailing list
Hello,
i.landsat.toar makes a problem at compilation time.
OBJ.x86_64-unknown-linux-gnu/main.o: In function `main':
/home/yann/tmp/grass_yann/imagery/i.landsat.toar/main.c:206: undefined
reference to `G_strncpy'
/home/yann/tmp/grass_yann/imagery/i.landsat.toar/main.c:213:
-import functions we should put satellite first then function?
Is there a common voice, or is it an open discussion.
thanks
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr
Hi Glynn,
2008/10/1 Glynn Clements [EMAIL PROTECTED]:
Yann Chemin wrote:
Right; you need unistd.h for swab().
see below about this
are there forgiving compilers around, so that this was not required
explicitely?
By default, implicit declaration of function ... only generates
]
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr/
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo
the gipe modules in the GUI?
I have an example of gmmenu.tcl and menudata.py in Addons-svn
--
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
YiKingDo: http://yikingdo.unblog.fr
: clear_screen: not found
/usr/local/grass-7.0.svn/etc/Init.sh: 252: clean_temp: not found
cp: cannot stat `': No such file or directory
/usr/local/grass-7.0.svn/etc/Init.sh: 259: cleanup_tmpdir: not found
/usr/local/grass-7.0.svn/etc/Init.sh: 263: done_message: not found
Yann
--
Yann Chemin
Thanks Glynn,
it works now.
Yann
2008/9/7 Glynn Clements [EMAIL PROTECTED]:
Yann Chemin wrote:
init.sh is in trouble on svn,
sounds like the programs are not found
the directory indeed does not have those files.
Could anyone point to the place of generation of these files plz?
thanks
for r.le
pc
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
: error: previous declaration of 'r' was here
make: *** [OBJ.x86_64-unknown-linux-gnu/do_graph.o] Error 1
Thanks,
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
___
grass
It is ok now,
Thanks Glynn,
Yann
2008/8/27 Glynn Clements [EMAIL PROTECTED]:
Yann Chemin wrote:
d.graph is bugging on compilation:
[EMAIL PROTECTED]:/home/yann/tmp/grass/display/d.graph# make
test -d OBJ.x86_64-unknown-linux-gnu || mkdir -p OBJ.x86_64-unknown-linux-gnu
gcc -I/home/yann
Hi,
make install does not find FORCE in SVN
[EMAIL PROTECTED]:/home/yann/tmp/grass# make install
make: *** No rule to make target `FORCE', needed by `install'. Stop.
Thanks
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
/main.c:88: undefined
reference to `D_new_window'
/home/yann/tmp/grass/raster/r.le/r.le.trace/main.c:89: undefined
reference to `D_set_cur_wind'
/home/yann/tmp/grass/raster/r.le/r.le.trace/main.c:90: undefined
reference to `D_show_window'
collect2: ld returned 1 exit status
--
Yann Chemin
Hello,
I am trying to compile vdigit for wxpython GUI in Linux, but it asks for -lgdi.
Anybody could tell the package name that has the libgdi?
Thanks,
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
and
grass_indent.sh parsing on all modules but three (r.evapo.PM,
r.hydro.CASC2D, i.vi.grid).
thank you,
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
readme.gipe
Description: Binary data
package, and they don't have FFTW (or their version of FFTW is
incompatible with the one used to build the gmath library), it won't
just be the handful of programs which need FFTW which fail to work.
--
Glynn Clements [EMAIL PROTECTED]
--
Yann Chemin
International Rice Research Institute
.
my includes in case this helps...
#include stdio.h
#include string.h
#include stdlib.h
#include math.h
#include grass/gis.h
#include grass/glocale.h
Any idea / suggestion, I am a bit lost here...
Thanks
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
: 480-965-6262; fax: 480-965-7671
www: http://www.public.asu.edu/~cmbarton
On Jul 25, 2008, at 4:09 PM, Yann Chemin wrote:
Hi,
after chmod +x, it created a nice histogram of elevation.10m.
So I tried on floating point image created by some process.
here is the problem:
Traceback (most
: Permission denied
GRASS 7.0.svn (spearfish60):~
--
thanks
Yann
2008/7/25 Yann Chemin [EMAIL PROTECTED]:
Hi Michael,
Nice histogram!
I am going to get python compiled and try it here...
Yann
--
Yann Chemin
International Rice Research Institute
Office: http
Hi,
after chmod +x, it created a nice histogram of elevation.10m.
So I tried on floating point image created by some process.
here is the problem:
Traceback (most recent call last):
File /home/yann/histogram_mpldemo.py, line 173, in module
main()
File /home/yann/histogram_mpldemo.py,
://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
___
grass-dev mailing list
grass-dev@lists.osgeo.org
wow...
ok then we have to get to GDAL dev list about that...?
Yann
2008/7/22 Glynn Clements [EMAIL PROTECTED]:
Yann Chemin wrote:
This is on my system:
Program received signal SIGSEGV, Segmentation fault.
0x7fda5b45ca7e in sincos () from /usr/lib/libgdal1.5.0.so.1
Whoah; GDAL
with r.out.gdal an identical map as the one GRASS would
use at 250m.
thank you,
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
---
Opportunities are usually disguised as hard
,
regards
Massimo Di Stefano.
Chiacchiera con i tuoi amici in tempo
reale!http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann
Clements [EMAIL PROTECTED]
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
2008/6/13 Hamish [EMAIL PROTECTED]:
Yann Chemin wrote:
I am generating 60,000 maps from 60,000 original ones
(shell script looping r.mapcalc),
it says unable to create mapset element cell_misc $filename
cell_misc/ saves each map's data in a subdirectory, not a file like the other
raster
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
ffmpeg web
site, that's normal, there is any ffmpeg.dll mentioned)
Any suggestions?
Thanks,
Marco
___
grass-dev mailing list
grass-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-dev
--
Yann Chemin
International Rice Research
2008/6/9 Glynn Clements [EMAIL PROTECTED]:
Yann Chemin wrote:
Just wanted to keep exact track of the processing leading to a new layer.
1 - would it be feasible to store the whole processing line with
parameters (i.e. r.something -a input=file_in output-file_out etc...)
as metadata
to make a scripts/ place inside a mapset
where scripts would get automatically saved with something like:
MMMDDH_MODULE_NAME.sh or the like?
just an idea.
Yann
--
Yann Chemin
International Rice Research Institute
Office: http://www.irri.org/gis
Perso: http://www.freewebs.com/ychemin
Hello,
some modules are complaining about this since this morning SVN:
i.eb.rohair: symbol lookup error: i.eb.rohair: undefined symbol: G_gisinit
I have made a clean install and still same.
(make distclean; ./conf.; make -j4 ; make install)
--
Yann Chemin
International Rice Research
Thanks,
I'll do that now.
Yann
2008/6/6 Markus Neteler [EMAIL PROTECTED]:
On Fri, Jun 6, 2008 at 11:28 AM, Yann Chemin [EMAIL PROTECTED] wrote:
Hello,
some modules are complaining about this since this morning SVN:
i.eb.rohair: symbol lookup error: i.eb.rohair: undefined symbol: G_gisinit
Hi,
in the latest svn, G_OPT_R_INPUT does not provide with a raster
listing of available raster layers in the current mapset,
in tcltk gui, it does not have the raster icon, but instead, it has
the sign on the button
--
Yann Chemin
International Rice Research Institute
Office: http
which includes all
gipe modules and nothing else.
Yann Chemin wrote:
I am OK to do so, but how can it be run in imagery/ or in
raster/, since there is already a Makefile in those places?
I can think of two ways:
1) keep gipe i.* and r.* modules in their own gipe/ dir in the grass source
tree
301 - 400 of 424 matches
Mail list logo
