I have finally managed to get a successful build of the host using Windows 10
x64 and Visual Studio 2015
The complete step-by-step process is at:
http://www.seti.net/engineering/engineering.php
I will go through that one more time from scratch to make sure its right.
I did have to modify
Hi
the solder joints on the U20 and the NXP TQFP package look tip-top. Better
than on the X3 crystal ;-)
I got the signals of P81(/WP), P82(/HOLD) and P68(/CS) into the logic
analyzer. Set the trigger to /CS falling edge.
On hackrf_spi flash write, the /HOLD and /WP are high level throughout
On 12 October 2016 at 13:32, Frank Kleinewoerdemann
wrote:
>
> the solder joints on the U20 and the NXP TQFP package look tip-top.
Better than on the X3 crystal ;-)
>
> I got the signals of P81(/WP), P82(/HOLD) and P68(/CS) into the logic
analyzer. Set the trigger to /CS
Worked fine for me - thanks for sorting that out.
From: HackRF-dev on behalf of James
Brown
Sent: October 12, 2016 12:50:51 PM
To: hackrf-dev@greatscottgadgets.com
Subject: [Hackrf-dev] Host Build with