Hi there,
Ok I disabled selinux and increased check inter to 30s. I enabled an http
check of an asphx file because ASP is critical to the operation of the
site. It was already there but I disabled it earlier because of the
problems we were having:
option httpchk HEAD /testip.ashx
Hi Peter,
it's needless to resend your mail 3 times. Most people on this list aren't
always available, but are generally helpful. Sometimes you just have to be
a bit patient.
I see no timeout in your stunnel configuration :
My stunnel.conf:
#setuid=stunnel
#setgid=proxy
debug = 3
output
On Sat, Feb 06, 2010 at 09:51:45AM +0100, Peter Griffin wrote:
Hi Will,
I didn't see my post in the archives and since this is a production site I
panicked.
Thank you so much for your explanation, it's much clearer now. I will make
the changes and report back how it went. Do you think
On Sat, Feb 06, 2010 at 12:27:10PM +0100, Peter Griffin wrote:
The minute I put the changes and made the loadbalancer active, external
users experienced serious downtime. I tried accessing our site from an
external source and sure enough we were unbrowsable. So I had to take
haproxy off
Both http https. Also both web servers started to take it in turns to
report as DOWN but more frequently the second one than the first.
I ran ethtool eth0 and can verify that it's full-duplex 1Gbps:
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half
I forgot to mention that yes this is a dedicated machine.
On 6 February 2010 12:47, Willy Tarreau w...@1wt.eu wrote:
On Sat, Feb 06, 2010 at 12:27:10PM +0100, Peter Griffin wrote:
The minute I put the changes and made the loadbalancer active, external
users experienced serious downtime. I
On Sat, Feb 06, 2010 at 01:16:00PM +0100, Peter Griffin wrote:
Both http https. Also both web servers started to take it in turns to
report as DOWN but more frequently the second one than the first.
I ran ethtool eth0 and can verify that it's full-duplex 1Gbps:
OK.
I'm attaching dmesg, I
You have selinux on, so it may be unhappy with some part of haproxy - the
directory it uses, the socket listeners, etc. Turn it off (if you can) until
you get everything working ok. Turning it off requires a reboot.
To see if it is on:
# sestatus
google for how to turn it off
I would back off
Hi,
I realise this must have been a stupid question for you I'm quite green to
Linux and haproxy so I do not have debugging skills. I would appreciate if
someone could explain at least if my hardware (all on one machine) could be
the problem or whether this is just some tcp/ip tuning that needs
9 matches
Mail list logo
