Finally found my notes from about six years ago. Then, according to my
notes, I found the angles on the Appropedia page. Apparently they were
referred to as "mitered edges." Not seeing them there now, but I may have
skimmed too quickly since Wolf and other helpful folks here have already
I did all bevels on my H12 -- the angles should be the same.
The BEVEL angle is:
* 15 degrees where roof cone edge meets roof cone edge (diagonal to ground
when set up)
* 30 degrees where roof cone edge meets base edge (parallel to ground when
set up)
* 30 degrees where base edge meets base
