>If the OP actually wants to write to spool, and is not necessarily
>running under BPXBATCH, he can do:
I can't see where the OP ever said he wanted to write to the spool.
--
Peter Hunkeler
Credit Suisse
--
For IBM-MAIN subscrib
Victor's Rexx works fine. I just tested it. On my system there is a PDS
utility installed, and this also works. I just tested it from a batch TSO
job:
//TSO EXEC PGM=IKJEFT01
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD *
PDS 'BOLAN.JUNK.JCL'
FIX RESET
/*
On Mon, Jan 25, 2010 at 6:12 AM, Stock
On Tue, Jan 26, 2010 at 9:50 AM, Thompson, Steve
wrote:
> In my opinion, FrameMaker causes problems for cut and paste. At least it
> does in manuals that I have to review.
Are you sure it's Frame? I think it's just PDF.
--
For I
Ron,
I don't really know when the SSA interface production stopped. All I do
know is that all of the drives that kicked out as defective were like
that, both 36G & 72G drives alike. We took delivery of the unit new in
December 2002.
Ron Hawkins wrote:
Jim,
Thanks for correcting me. I was
Jim,
Thanks for correcting me. I was told by many sources that when IBM/Hitachi
stopped making SSA interfaces that the ESS drives were FCAL with an SSA
bridge. I stand corrected.
Ron
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of
> J
so i have been informed ... well - i did what I could to assist ... oh
well ..
Chris Hoelscher
Senior IDMS & DB2 Database Administrator
Humana Inc
502-476-2538
choelsc...@humana.com
you only need to test the programs that you want to work correctly
From:
"Pommier, Rex R."
To:
IBM-MAI
Chris,
But.unfortunately.the publib link points to a z/OS 1.10 messages
and codes book. The book doesn't contain the message.
Rex
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Chris Hoelscher
Sent: Tuesday, January 26, 2010 4:1
Ron,
The 2105-800 that we replaced in December 2008 used SCSI disks with a
small SSA- SCSI bridge circuit board on the back of the drive. The
mounting rails had slots in them that held the CB in place on the
drive's SCSI connector. We routinely connected these SCSI drives to a
PC when the d
i goog'ed ADR261I and got 2 hits:
what appears to be a SHARE presentation from 2008 - What's New in z/OS
1.10 DFSMSdss
also in the following publication
http://publib.boulder.ibm.com/infocenter/zos/v1r10/index.jsp?topic=/com.ibm.zos.r10.e0zm100/dssmsgs.htm
Chris Hoelscher
Senior IDMS & DB2
Can't find it either. In z/OS library or the IBM search DB. Seems pretty
self-explanatory though.
Either it's already one extent, or there is no space to consolidate the
extents.
Guess it's PMR (or RCF) time.
HTH,
Anyone know where I can find ADR261I? It's not in the manuals on the
Web, that I
The smphold dataset is a PS file. Are you trying to do an IEBCOPY? If so you
can't do it.
Regards
Otto
HP Enterprise Services
Infrastructure Specialist
Ahold Account
CICS & Capacity Technical Support
P.O. Box 6462
2000 Wade Hampton Blvd.
LC1-302
Greenville, South Carolina, 29606
Cell: 864
> -Original Message-
> From: IBM Mainframe Discussion List
> [mailto:ibm-m...@bama.ua.edu] On Behalf Of Schumacher, Otto
> Sent: Tuesday, January 26, 2010 3:27 PM
> To: IBM-MAIN@bama.ua.edu
> Subject: Re: undoc'd DFDSS msg
>
> The smphold dataset is a PS file. Are you trying to do an
> I
On Tue, 26 Jan 2010 08:55:44 -0800, Ron Hawkins
wrote:
You can't blame a golf club for your slice,
<
Some of us don't need to hear that :)
P
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lis
Are you running on zOS 10. This message should be in the messages and code for
DFSMS It came in with zOS 10. I think the dataset is an extended multi volume
dataset. Check with you storage Admin support.
Regards
Otto
HP Enterprise Services
Infrastructure Specialist
Ahold Account
CICS & Capac
It isn't in the 1.10 documents I have.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Schumacher, Otto
Sent: Tuesday, January 26, 2010 3:46 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: undoc'd DFDSS msg
Are you running on zOS 10. This message
> -Original Message-
> From: IBM Mainframe Discussion List
> [mailto:ibm-m...@bama.ua.edu] On Behalf Of Schumacher, Otto
> Sent: Tuesday, January 26, 2010 3:46 PM
> To: IBM-MAIN@bama.ua.edu
> Subject: Re: undoc'd DFDSS msg
>
> Are you running on zOS 10. This message should be in the
> me
Hi Tony,
That would work as long as the dump format never changed down the road.
While it is pretty straight forward to do, and I have done it as a test,
I don't want to get into something I have to check on each new release
of z/OS. Couple that with the fact that after I find an occurrence of
the
SCSI Disks in a 2105-800? That never happened. The ESS used SSA disk drives,
or FC-AL drives with a SSA/FC-AL bridge.
And there is no way EMC, STK or HDS are going to let you plug pull apart a
HDD assy and plug an FC-AL drive from an ESS into it to use as a spare. If
the vendor doesn't stop you th
2010/1/26 Hardee, Charles H :
> Without going into details, what I am attempting to do is read every
> page in a dump in order to scan the page for a particular string.
>
> I am using a REXX (found at the end of this note) that simply starts ad
> address x'' and issues an EVAL for each add
Anyone know where I can find ADR261I? It's not in the manuals on the Web, that
I can find.
ADR261I (001)-DFRGD(01), UNABLE TO FURTHER CONSOLIDATE EXTENTS FOR
SYS5.DATACOM.V11R0M2.SMPHOLD, 01
John McKown
Systems Engineer IV
IT
Administrative Services Group
HealthMarkets(r)
9151 Boulevard 26
Gil,
All your extents can be contiguous so there is no fragmentation whatsoever.
You are hitting a boundary on the number of extents. You don't know, or care
if those extents are fragmented.
Extent = Space or degree to which a thing is extended
Fragment = A small part broken off or detached.
I'm
---
According to:
http://publib.boulder.ibm.com/infocenter/zos/v1r9/index.jsp?topic=/com.i
bm.zos.r9.ikjb700/inurp.htm
error 23 indicates:
" Processing unsuccessful; the IKJURPS service was invoked in an
environment in which the TSO/E
Hi.
I need a CPSM COBOL piece of code to modify the content of some counters
of DB2ENTRY resource table.
If anyone can help me or give me some link to join a CICS forums.
Thanks.
Atte.
Alvaro.
--
For IBM-MAIN subscribe / s
Nigel,
With SMS it can only issue certain commands. There is not "CMD" function that
I know of is SMS. So it needs to be able to Modify OAM so it can sync things
like TAPE
It needs to be able to activate an SCDS or ACDS data set.
You also need (as a person) the ability to issue V SMS comman
The EXEC is literally this simple (at the moment):
Issue EVAL command for an address, length of 4k
Increment address by 4k
If address > x'7FFF' exit loop
Loop
So, why do I need to increase my storage?
I'm processing 1 4k page from the dump at a time.
I'm not building any type of stem variable
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of Edward Jaffe
>
> Hardee, Charles H wrote:
> > Has anyone ever experienced an 878-10 abend in IPCS while processing
a
> > dump?
> >
>
> I used to get out-of-space conditions from both IPCS and z/XDC many
> years ago be
>The reason for the question is that the Modify commands are done under the
RACF userid of the SMS address space - and it is not currently authorised to
do these commands. You may think it is easy to authorise these commands to
SMS - but our security dept is concerned about what other commands m
At the end of my RDATALIB diatribe, I post three links which are good
references for using it and protecting KEYRINGs, etc. Oh, I hit $10 with
Google AdSense yesterday. I am ordering the check and my life is now
complete. There is nothing else that I could possibly accomplish, at this
point.
Sc
Hardee, Charles H wrote:
Has anyone ever experienced an 878-10 abend in IPCS while processing a
dump?
I used to get out-of-space conditions from both IPCS and z/XDC many
years ago before I changed my TSO/E logon "size" to:
Size ===> 524288
--
Edward E Jaffe
Phoenix Software Internat
On Tue, 26 Jan 2010 08:55:44 -0800, Ron Hawkins wrote:
>
>The problem here is number of extents, not fragmentation. No-one gives a
>toss about fragmentation on a PDS or PDS-E since the 3990-3.
>
This seems to be a quibble about definition. In my view, a
secular growth in the number of extents, dis
Thanks all for the great information!!
We have elected to use a storage group that is not SMS managed so that the
management class release does not apply.
Again, thanks!!
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Hal Merritt
Se
Andrew,
Instead of coding the exit, how about this:
In a shop I once worked for a few years ago, I used to put saved TSO Logon
Messages into the BRODCAST dataset to indicate the system you logged on to,
e.g., (now this is an old example ...)
se 'z/OS 11 44
- Original Message -
From: "Paul Gilmartin"
Newsgroups: bit.listserv.ibm-main
Sent: Tuesday, January 26, 2010 11:08 AM
Subject: RLSE pipe dream (was: The Incredible Shrinking PDSE)
On Mon, 25 Jan 2010 14:30:27 -0600, Hal Merritt wrote:
Since the program repeatedly opens and closes t
Gil,
The problem here is number of extents, not fragmentation. No-one gives a
toss about fragmentation on a PDS or PDS-E since the 3990-3.
I've used Space Release in the Management Class of several sites, and apart
from the SAS Dataset problem I cited in another post I've never had a
problem with
Ron,
Thanks. It will take me some time to digest that.
Don
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf
Of Ron Hawkins
Sent: Tuesday, January 26, 2010 4:13 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: PAGE datasets -- few large or more small
Peter / Gil .. thank you for your advice.
Kind Regards,
Jim Thomas
617-233-4130 (mobile)
636-294-1014 (res)
j...@thethomasresidence.us
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf
Of Paul Gilmartin
Sent: Tuesday, January 26
On Mon, 25 Jan 2010 14:30:27 -0600, Hal Merritt wrote:
>
>Since the program repeatedly opens and closes the PDSe, I can watch the space
>allocation via ISPF 3.4. To our concernation, the allocated space shrinks as
>the number of exents rises. No matter how much space we specify, the file
>shrin
Now, how do I override that? Is there a JCL parameter?
As other have said, use a different MgmtClas (MC) is you can or make the
PDSe nonSMS and piss off everyone. Lots of time you can't allocate with a
different MC but you can ALTER the DSN after it's allocated.
Jack Kelly
202-502-2390 (Offic
On Tue, 26 Jan 2010 13:15:45 +0100, Hunkeler Peter (KIUP 4) wrote:
>> I'm looking for some direction and advice on dynamically extracting
>> STDOUT data from USS that I can feed into a CICS sub-system. Would a
>> writer /> listener be the right direction ?. How would I extract the
>>STDOUT data ?.
I know you mentioned that you were reluctant to change the logon procs, but
if you have a CLIST or REXX front-end, you could change that to invoke
another CLIST or REXX exec to detect the production system, issue the
necessary message(s), prompt for acknowledgment, and take action as needed.
Keep
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Marian Gasparovic
Sent: Monday, January 25, 2010 2:37 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Enormous redbook
Steve,
FrameMaker is used and it generates a book using macros and stuff, so
jus
When I enter the system command 'DISPLAY SMS,LIBRARY,DETAIL' this seems
to translate into a modify command for the OAM address space -
F OAM,D,LIB,L=ABC0021-Z.
Similarly when I do a 'V SMS,LIB(XYZATL3),ONLINE' this translates into the
command 'F OAM,V,XYZATL3),ONLINE'
I say translates - somet
Hello Group,
Has anyone ever experienced an 878-10 abend in IPCS while processing a
dump?
Without going into details, what I am attempting to do is read every
page in a dump in order to scan the page for a particular string.
I am using a REXX (found at the end of this note) that simply sta
According to:
http://publib.boulder.ibm.com/infocenter/zos/v1r9/index.jsp?topic=/com.i
bm.zos.r9.ikjb700/inurp.htm
error 23 indicates:
" Processing unsuccessful; the IKJURPS service was invoked in an
environment in which the TSO/E TMP cannot process an IKJURPS request.
For example, during LOGON pr
>Yes, Barbara, unfortunately that is the one.
Well, it was worth a try. :-)
>And Mike Cowlishaw was to give a presentation but unfortunately couldn't
because they found a bomb (from WW2) next to the conference center. :-(
I know. I've been there! The presentation I attended in that time slot wa
Andrew
My preference in this case would be to keep the actual exit code as simple as
possible and offload the "smarts" into some other started task.
I would suggest having some sort of owner STC that starts before TSO and build
a system-level name token (or SSI anchor or ENQ or... etc etc) tha
Yes, Barbara, unfortunately that is the one. There are some nice topics, but
very few apply to my job, and not enough to justify a whole week. Some look
nice.
For example the technical conference in Dresdey a couple of years ago there was
a presentation on the port of OpenSolaris. That was on
>Good answer :-)
>
>Now, how do I override that? Is there a JCL parameter?
I used release immediate on a management class *once* and quickly changed it.
Your storage admin may have coded the acs routine to accept a management class
value passed in via jcl but not likely. You can use idcams alter
Rob
For reasons I won't go into, my management have decreed that there must be a
positive acknowledgement by the user that they are on a production system.
I loop in the exit until I get one. Unfortunately using the broadcast
facility doesn't give me this
Andrew Metcalfe
Global z/OS Systems Pr
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of Paul Gilmartin
>
> On Mon, 25 Jan 2010 16:43:59 -0800, Ron Hawkins wrote:
> >
> >If your Storage Admin has PDS and/or PDS-E in a Management Class with
> >Partial Release =YES_IMMED then make sure you beat him/her aroun
Lindy,
>I was so looking forward to going this year, too. But after reading the
>topics
there is nothing for me.
you didn't by chance check the wrong conference, did you? 'Nothing there for
me' applies (for me) to the former EXPO - now Technical University.
The 'real' zConf (this link http:
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of Ron Wells
>
> Tried that--getting following...thinking something in racf that is
> limiting who uses it ..
> init failed with rc = 428 (Key entry does not contain a private key)
http://publibz.boulder.ibm.com/cgi-bin/
I was so looking forward to going this year, too. But after reading the topics
there is nothing for me.
From: IBM Mainframe Discussion List [ibm-m...@bama.ua.edu] On Behalf Of Barbara
Nitz [nitz-...@gmx.net]
Sent: 26 January 2010 08:52
To: IBM-MAIN@bama
> I'm looking for some direction and advice on dynamically extracting
> STDOUT data from USS that I can feed into a CICS sub-system. Would a
> writer /> listener be the right direction ?. How would I extract the
>STDOUT data ?.
Create a named pipe and have the writer send its stdout to that pi
Andrew
Does the broadcast dataset function in TSO not help?
Rob Scott
Developer
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.617.614.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m..
Thanks for the replies - they confirmed my suspicions.
All I am trying to accomplish in IKJEFLD3 is to display a message (via TPUT)
to warn that the user has logged on to a production system rather than
development.
Rather than hard-code the text of the message in the exit, I proposed to
keep it
> I'm looking for some direction
> From
> I'm looking for some direction and advice on dynamically extracting STDOUT
> data from USS that I can feed into a CICS sub-system. Would a writer /
> listener be the right direction ?. How would I extract the STDOUT data ?.
> Could BPXWDYN be used ?.
M
On Mon, 25 Jan 2010 05:17:01 -0800, Anson Ye
wrote:
>Yes, the client is running as root
>
>I have no idea why the root ID needs extra setup efforts. Could you give me
some clue? Thanks!
No, sorry, I don't know the details. It has to do with security on the other
end. That's all I seem to
Top of the morning to everybody,
I'm looking for some direction and advice on dynamically extracting STDOUT
data from USS that I can feed into a CICS sub-system. Would a writer /
listener be the right direction ?. How would I extract the STDOUT data ?.
Could BPXWDYN be used ?.
I'd prefer to have
> I haven't tried this, but theore
> From:
> I haven't tried this, but theoretically you should be able to run
> sendmail and a custom Perl script as a local delivery agent to
> accomplish this function.
It looks like the requirements for this specific case are quite trivial.
E-mails sent to z
Sorry, I missed some decimal points. Should be:
CMR time is staying constant at 0.1ms, which indicates delays at the Host
End.
At 95% Channel MP busy I'm averaging 45-50 OE and PEND time has jumped to
45ms, with CMR at 0.1-0.2ms.
> growing to 3-5ms. CMR time is staying constant at 1ms, which ind
Don,
My two cents
>
> I do not know what are the potential performance limiting factors are for
> the following:
> 1. The FICON cable/protocol
[Ron Hawkins] The Microprocessors on the Host and on the storage are the
first limiting factor. Saturating these usually leads to connect time and/or
Pen
Hi Magen,
The SDSF EMCS console should be deactivated on exit.
But if you change the SDSF console name before accessing ULOG you would
never get the problem.
I use this code, before entering ISPF:-
/*==REXX===
==*/
parse source .
On Mon, 25 Jan 2010 20:19:36 -0600 Rick Fochtman wrote:
:>Trying to start IPCS for the first time on this system and getting a
:>failure in IKJURPS, RC=20, ERROR=23
:>Can someone tell me what I'm doing wrong? MSGS & CODES dscreiption is
:>completely useless, as are the IPCS pubs I have.
I vag
64 matches
Mail list logo
