The IBM DFSORT website has a set of sample DCOLLECT data scripts (identified
as ICESTGEX#8203; - Storage Administrator Examples#8203;) that can likely be
useful for volume-capacity identification and post-processing.
Scott Barry
SBBWorks, Inc.
http://sbbworks.com/
On Wed, 13 Jun 2012 10:44
MAN-type or
LOGSTREAM-managed environments, with some enhanced feature/function when it
comes to accurate post-processing.
Scott Barry
SBBWorks, Inc.
http://sbbworks.com/
On Mon, 11 Jun 2012 22:00:51 +, Campbell Jay james.l.campb...@irs.gov
wrote:
Is anyone else is required to collect
Have you read Using Access Registers in MVS Extended Addressability?
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe
Can I strongly suggest that you review the MVS Extended Addressability manual
: SA22-7614
It is a very well written guide on how to do exotic things in z/OS including
synchronous cross-memory, AR-mode programming and managing dataspaces and
hiperspaces.
Rob Scott
Lead Developer
Rocket
All IBM services, whether branch entry, PC or SVC have their supported modes
(TCB and/or SRB) and cross-memory environments documented in the manuals.
I would strongly advise that you refer to the manuals than use any sort of
generalizations.
Rob Scott
Lead Developer
Rocket Software
77 Fourth
The possibility of consuming extra CSA is much less desirable that a few extra
instructions inside a neutered ENF listener routine.
I would probably choose option (2)
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel: +1.781.684.2305
Email
.
Eventually found Comms Server under our entitlement for z/OS base product -
even though SR was listing things like Communications Server for VSE in the
search results screen.
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel
Shmuel:
Actually we have three apps written in LE Cobol, same issue on 1.12 ...Le Cobol
4.2 , when I inserted a
//SYSOUT , everything is a-ok
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Shmuel Metz (Seymour J.) shmuel+ibm-m
Shmuel:
I worked MVS at that time on a PC390 ...we had a 3800 and tape drives and a
3174 attached to it.
Also BAR/RJE supported tape drives and of course various printers that were
BUS/TAGGED into it
Scott J Ford
Software Engineer
http://www.identityforge.com
and all of a sudden like
magic i have all the Cobol Displays.
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Frank Swarbrick frank.swarbr...@yahoo.com
To: IBM-MAIN@bama.ua.edu
Sent: Thursday, June 7, 2012 2:17 PM
Subject: Re: LE COBOL odd
Shmuel,
We used these when I worked on europe, we were converting a lot of small Philip
Morris offices to these..
http://www.barrcentral.com/help/beps/Overview_BARR_RJE.htm
Scott ford
www.identityforge.com
On Jun 7, 2012, at 1:08 PM, Shmuel Metz (Seymour J.)
shmuel+ibm-m...@patriot.net
I should have added under z/os1.11 works fine
Scott ford
www.identityforge.com
On Jun 5, 2012, at 11:09 PM, Scott Ford scott_j_f...@yahoo.com wrote:
All,
We migrated to z/os 1.12 , LE COBOL. I have noticed on a COBOL program
running as a STC,
No yucks please, a Display or Write
John,
No, we don't change LE options, I will look at them..
Scott ford
www.identityforge.com
On Jun 6, 2012, at 9:16 AM, McKown, John john.mck...@healthmarkets.com
wrote:
Did somebody change the LE options? That's all that I can think of. No, I
don't know what the option(s) might
John,
I fixed it, but the fix was odd, I added a //sysout dd sysout=*
It now works
Scott ford
www.identityforge.com
On Jun 6, 2012, at 9:16 AM, McKown, John john.mck...@healthmarkets.com
wrote:
Did somebody change the LE options? That's all that I can think of. No, I
don't know what
Andy,
We work with the DOJ(FBI) and they remove IP addresses etc..since we are a IP
server/client dealing with security
subsystems.
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Andy White awh...@metlife.com
To: IBM-MAIN@bama.ua.edu
Thanks Clark, I had to look it up, didn't know it existed, much appreciated
Scott ford
www.identityforge.com
On Jun 6, 2012, at 4:03 PM, Clark Morris cfmpub...@ns.sympatico.ca wrote:
On 6 Jun 2012 07:04:52 -0700, in bit.listserv.ibm-main you wrote:
John,
I fixed it, but the fix was odd
in Maybe z/os , guessing ..?
Scott ford
www.identityforge.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Peter,
We pass a parm debug=y or debug=n , our code there is a 88 level...
If debug-on
...
...
End-if
Plus I had to create a special sysout , allocated dynamically...
Scott ford
www.identityforge.com
On Jun 4, 2012, at 1:11 PM, Farley, Peter x23353
peter.far...@broadridge.com wrote
Kirk,
Yes, I agree also and the ability to read a manualhave a ton of customers
who don't even take the time to rtfm..l
Scott ford
www.identityforge.com
On Jun 1, 2012, at 5:33 PM, Kirk Talman rkueb...@tsys.com wrote:
IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu wrote on 05/23/2012
Lizette,
Are you trapping the messages ?
Scott ford
www.identityforge.com
On Jun 1, 2012, at 12:43 PM, Lizette Koehler stars...@mindspring.com wrote:
Cross Posting to IBM Main and TSO-REXX
I have a Rexx process that issues the HLIST command. I have been successful
in trapping
Lizette,
TPut will go to sysprint or systsprt
Scott ford
www.identityforge.com
On Jun 1, 2012, at 4:16 PM, Lizette Koehler stars...@mindspring.com wrote:
Scott
Yes the output is going to a outdsn
HLIST DSN('dsnvar') MCDS ODS('tmpdsn')
I have set TSO PROF NOINTERCOM NOPAUSE
Yes, system
Scott ford
www.identityforge.com
On Jun 1, 2012, at 5:59 PM, Walt Farrell walt.farr...@gmail.com wrote:
On Fri, 1 Jun 2012 16:37:51 -0400, Scott Ford scott_j_f...@yahoo.com wrote:
TPut will go to sysprint or systsprt
She's concerned about a TSO session, and there it will go
to contract the pools if required.
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN
contains the result of the extract..but with SEGMENT= what maps to
the segment fields like in the RACF templates that the Extract refers me to..
Sorry all, first serious RACF program...but i need some assistance
Scott J Ford
Software Engineer
http://www.identityforge.com
Walt,
Thank you very much on both accounts..
Scott ford
www.identityforge.com
On May 29, 2012, at 3:02 PM, Walt Farrell walt.farr...@gmail.com wrote:
First, I suggest that for RACF-related questions you use RACF-L rather than
IBM-MAIN, as there will be more RACF-knowledgeable responders
address space when it is invoked for an
abend in the exit.
I would probably choose the last option.
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message
...thanks for the
option...
Scott ford
www.identityforge.com
On May 25, 2012, at 8:47 PM, John Gilmore johnwgilmore0...@gmail.com wrote:
Charles Mills writes
begin extract
DBB LECL will almost certainly not assemble (as John G. was pointing
out, a bit obtusely). Should be LRECL
/end extract
Peter,
I built the plist for a call to irrseq00 , I will post my code a bit later.
Thanks for the reply
Scott ford
www.identityforge.com
On May 26, 2012, at 12:31 PM, Peter Relson rel...@us.ibm.com wrote:
I am experiencing the dreaded S0C4-11
I didn't see an answer to the question of just
on my mistake, yes I am admiting I make mistakes
:(
Regards,
Scott J Ford
Software Engineer
http://www.identityforge.com
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu
John:
That was correct in my code, thats what the manual gave..but I also found some
of their parameter examples wrong
Scott J Ford
Software Engineer
http://www.identityforge.com
From: John Gilmore johnwgilmore0...@gmail.com
To: IBM-MAIN@bama.ua.edu
Sent
All:
Thank you so much for the help. We are digging through the problem.
I hadnt seen this one before, so I was looking for pointers to point me the
right direction to find the cause.
All your help was very much appreciated.
Scott J Ford
Software Engineer
http://www.identityforge.com
are seeing the
abends on the RACF Stc log..
I cant paste the code here, its proprietary ...I apolognize in advance..but I
have never seen this happen. This exit is a RACF exit,,IRREVX01 and they are
also running a Endeavor ICHRCX01 exit..I was suspect of that exit...
Scott J Ford
Software Engineer
were going
to replace it with our application...
But unfortunately, the deal fell through..
Scott J Ford
Software Engineer
http://www.identityforge.com
From: David Andrews d...@lists.duda.com
To: IBM-MAIN@bama.ua.edu
Sent: Tuesday, May 22, 2012 4:46 PM
John,
Boy that's a blast from the past, I worked man moons ago a s/370-158..3215 m
worked another place on 4381s using a 3287 as a CICS log
Scott ford
www.identityforge.com
On May 20, 2012, at 1:07 PM, McKown, John john.mck...@healthmarkets.com
wrote:
I agree totally. Personally, I really
JOB00225 IEF404I REXXGRP - ENDED - TIME=09.17.27
09.17.27 JOB00225 $HASP395 REXXGRP ENDED
I assumed I misunderstand how parameters are passed in Rexx to Assembler...I
thought that
R1 pointed to the Adcon list...can someone be so kind as to point this old
fellow .the right way
Regards,
Scott
for example a Class and Profile to the Assembler routine
doing the call to RACF
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Tony Harminc t...@harminc.net
To: IBM-MAIN@bama.ua.edu
Sent: Friday, May 18, 2012 12:05 PM
Subject: Re: Rexx
Tony,
Sort for the misname ...I am looking at the storage save area chain, John send
me, ty, John..
And I will take a look at LINKPGM..
You guys are great as usual
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Tony Harminc t
Interesting worked vm since sp1 and VSE (1970s) never ever saw that problem...
Scott ford
www.identityforge.com
On May 17, 2012, at 7:24 PM, Shmuel Metz (Seymour J.)
shmuel+ibm-m...@patriot.net wrote:
In 1696751327392196.wa.ronmacraehotmail.co...@bama.ua.edu, on
05/16/2012
at 03:03 PM
Frank
You were one of the first IBMers I ever saw that went *way* beyond the call of
duty to help others.
You will be missed.
Enjoy your retirement!
Rob Scott
Lead Developer
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web
See ' SYS1.MODGEN(IGVDGNB)'
ECVT---ECVTDGNBDGNB
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List
Ray,
Very true, also you may gain speed in computations but not I/O that was very
clear in a Share presentation..
Scott ford
www.identityforge.com
On May 16, 2012, at 2:47 PM, Ray Mullins m...@lerctr.org wrote:
On 2012-05-15 12:35, Ed Mackmahon wrote:
Hi List.
We are zOS 1.12 shop.
I
and execution. I am
of the mindset always, 'plan the work and work the plan'...
Scott ford
www.identityforge.com
On May 16, 2012, at 4:03 PM, Ron MacRae ronmac...@hotmail.co.uk wrote:
Hi all,
We are currently an exclusively z/OS site with multiple LPARs sharing
a single IOCDS and DASD
Guys,
A little lost on the point of this thread , not trying be rude or flippant ,
just I see a lot about performance, is it valid with today's hardware and
software, yes there is time sensitive events and software and hardware.
Scott ford
www.identityforge.com
On May 16, 2012, at 4:35 PM
Oh, now i see what Bernd was talking about, sorry guys , old age
Scott ford
www.identityforge.com
On May 16, 2012, at 4:53 PM, Scott Ford scott_j_f...@yahoo.com wrote:
Guys,
A little lost on the point of this thread , not trying be rude or flippant ,
just I see a lot about performance
Cheryl,
Anytime, glad I can help
Scott ford
www.identityforge.com
On May 15, 2012, at 7:28 AM, Meehan, Cheryl cmee...@cswg.com wrote:
Hi, Scott-
No changes in Sequence, no new products will continue to look for
timing.
Thanks!
Cheryl
-Original Message-
From
Look at ASCBIOSX and ASCBIOSC in the ASCB (IHAASCB)
Rob Scott
Lead Developer
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN
Frank,
Congrats on your retirement. Wishing you all the happiest and best wishes
Best regards,
Scott ford
www.identityforge.com
On May 15, 2012, at 9:00 PM, Frank Yaeger yae...@us.ibm.com wrote:
Just a note to let everyone know I'll be retiring at the end
of this month (5/31/2012). I've
Ed,
What's the load library lrecl, blksize ? Just curious
Scott ford
www.identityforge.com
On May 15, 2012, at 4:21 PM, Ed Mackmahon dropip...@gmail.com wrote:
yes
--
For IBM-MAIN subscribe / signoff / archive access
Cheryl,
Did you review the SNA messages and codes, that's your fist step..sense 8002 is
a resource not available, maybe a timing issue with the IPL ...
Scott ford
www.identityforge.com
On May 14, 2012, at 12:21 PM, Meehan, Cheryl cmee...@cswg.com wrote:
Greetings-
We upgraded our
Mansi,
Please try to explain what your trying to do..it is not clear from you post
Scott ford
www.identityforge.com
On May 14, 2012, at 12:15 AM, Mansi Kulkarni mansi.e...@gmail.com wrote:
Hi,
Sir can u tell me program of IEBEDIT utility in JCL.. Plz give all
details of steps please
Cheryl,
Your IPL sequence on any of the LPARS havent changed ? New products ?
Have seen sequence issues before , usually turned out to be timing...
Scott ford
www.identityforge.com
On May 14, 2012, at 3:16 PM, Meehan, Cheryl cmee...@cswg.com wrote:
Scott-
The reason the resource
remember
the 16 extent per volume limitation, so it's oh so important to code a
sufficiently large enough secondary amount (and/or primary as well) so that a
one-volume allocation can even exceed the 65K track limitation and still be
within 16 extents.
Scott Barry
SBBWorks, Inc.
On Tue, 1 May 2012
Sure is, but think about a lot of banking, in fact almost all of, we have a ton
of bank customers,
Rely on IBM Mainframes..I am multi platform , I enjoy all of them
Scott ford
www.identityforge.com
On May 11, 2012, at 9:57 AM, John Gilmore johnwgilmore0...@gmail.com wrote:
Masochism
Lim,
A couple of questions, who's module ? IBM ? Other ?
Has this program ever worked before ?
If so, what changed ?
Scott ford
www.identityforge.com
On May 11, 2012, at 11:31 PM, Lim Ming Liang limm...@unifi.my wrote:
Hi,
I had quite a few similar error messages on load modules fetching
Ed,
We do it with a debug=y or n, n= no messages unless a failure occurs, y= yes
gives you verbose
Scott ford
www.identityforge.com
On May 12, 2012, at 12:18 AM, Ed Finnell efinnel...@aol.com wrote:
.
--
For IBM-MAIN
An 083 for the living room, great conversation piece
Scott ford
www.identityforge.com
On May 10, 2012, at 6:21 PM, William Donzelli wdonze...@gmail.com wrote:
And the owner of the last blank punch card supplied died and the
company closed up.
So of course, I bought 100,000 cards, just
Excellent explanation, John
Scott ford
www.identityforge.com
On May 9, 2012, at 8:05 AM, McKown, John john.mck...@healthmarkets.com
wrote:
Not all .NET runs on Mono. Mono is reverse engineered and so may not
implement everything 100% like Microsoft does. Also, it tends to lag .NET
Support
Center. Provide the SYSOUT output for the job.
Source:
DFSMSdfp
Routing Code:
2,11
Descriptor Code:
6
Regards,
Scott J Ford
Software Engineer
http://www.identityforge.com
From: willie bunter williebun...@yahoo.com
To: IBM-MAIN@bama.ua.edu
Sent
Rex,
Amen brothers and sisters of the Mainframe Church .hes sounds like quack
quack to me
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Pommier, Rex R. rex.pomm...@cnasurety.com
To: IBM-MAIN@bama.ua.edu
Sent: Monday, May 7, 2012
Ty Ron, sorry dont get this guy
Scott ford
www.identityforge.com
On May 7, 2012, at 10:16 PM, Ron Hawkins ronjhawk...@sbcglobal.net wrote:
Yeah, he confirmed he is Anton in an off-list response to me.
He signed off Kerneels/Anton/GrandMa/Helpdesk but he has also used
Mohammed. Seems some
without having to parse the screen line.
Rob Scott
Lead Developer
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu
The VSMLIST service presents this information in a slightly more digestible
form and it will also get the appropriate locks for the caller if you use
LINKAGE=SYSTEM
It is what MXI uses under the covers for reporting on private or common subpool
usage.
Rob Scott
Lead Developer
Rocket Software
is...
But congrats on the victory
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 4, 2012, at 3:46 PM, George Henke gahe...@gmail.com wrote:
I do not suppose there is any way of sharing a zBx between 2 CECs.
On Fri, May 4, 2012 at 3:14 PM, Mark Post mp...@suse.com wrote:
On 5/4/2012
Aren't we here to help colleagues who need the help and assistance ?
I understand there's a fine line between eloping and be used bad abused ..been
there done that haver numerous tshirts
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 4, 2012, at 3:12 PM, Kerneels de Wet
Yeah Dave,
I also think a lot of managers , who lack technical expertise get sold ideas,
like someone else said. Been there also...about 100 Advil headache ...I was
told by a very wise Irish woman, my mom, don't use your head for a hat rack...
Scott Ford
Senior Systems Engineer
Charles,
Yeh I know, had uncles in construction business, had patents on tools...we all
can't be
Nathan Myhrvold and be worth $650 million..man be interesting
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 3, 2012, at 9:47 AM, Charles Mills charl...@mcn.org wrote
Correct me if I am wrong, but isn't this about Google imbedding java in their
operating system on phones ?
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 3, 2012, at 11:56 AM, Charles Mills charl...@mcn.org wrote:
I always bristle at the use of the word copyright as a verb
John,
Thanks for the explanation, we deal our product also through Oracle, strictly
between you and me, we are taking a serious screwing financially, plus the
manuals done in India ...man
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 3, 2012, at 1:48 PM, McKown, John
Guys,
I don't hate Oracle, far from it, most of our customers about 99% are great and
helpful..
I don't understand some business nowadays
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 3, 2012, at 1:48 PM, McKown, John john.mck...@healthmarkets.com
wrote:
Basically
Mark,
Are you going to a hosting DR recovery site , I.e.; Sungard ..
If so, they also usually are pretty good to help out..
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 2, 2012, at 9:46 AM, Mark Jacobs mark.jac...@custserv.com wrote:
We don't, yet. It's only used for XCF
All,
So how do you protect code, whatever language you have written in , in business
?
Without copyright, doesn't it imply , people can take you source and change it
and resell it ...if the gave your source , right ?
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 2, 2012
Charles,
Functionality of the language ? Not being dense, but you functionally what the
programming language does in the app or functionally what it does, I.e.; read
files ,write files, etc..
Scott Ford
Senior Systems Engineer
www.identityforge.com
On May 3, 2012, at 12:15 AM, Charles
Elardus,
It's probably all ready been mentioned, a small rexx clist can do this also...
Maybe 10 lines or so...also depends on what else you doing with the data, any
formatting, etc...
Hth
Regards,
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 30, 2012, at 12:59 PM
Elardus,
Wow, 3800 printers, I remember they forms and then you could over or insert you
text data , e to into the form for printing..worked the awhile ago..10+ yrs my
friend
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 30, 2012, at 12:27 PM, Elardus Engelbrecht
Yep, I agree , trying to explain to manglers , aka managers , what a sysprog
does and has to know...my old age is showing, 62 in August , some ppl just
don't get what we do..
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 27, 2012, at 5:14 AM, Thomas Berg thomas.b
Hope your all right , man
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 27, 2012, at 3:21 PM, Ed Finnell efinnel...@aol.com wrote:
_Photos: April 27, 2011 Superoutbreak - weather.com_
(http://www.weather.com/outlook/weather-news/news/articles/alabama-tornado-042711_2011
Ed,
I grew up in Indiana seen a few tornados...they are definitely scary
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 27, 2012, at 5:17 PM, Ed Finnell efinnel...@aol.com wrote:
This was last year. I just got sore from moving boxes and people around,
one lady moved
Lot of ways to crack this one, FTP like everyone stated. Jes2 to jes2 using
TCPIP, using NJE,
TSO Xmit works great
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 26, 2012, at 7:44 PM, John McKown john.archie.mck...@gmail.com wrote:
The SENDSITE command will help
would like more information on any of these dates, please contact our
Mainframe Marketing Specialist, Harriette Matthews at
hmatth...@protechtraining.com
Yours in learning,
Scott
Scott Redmond McFall
http://www.linkedin.com/in/scottrmcfall
http://www.linkedin.com/in/scottrmcfall
Ed,
We run z/Pdt also, but on a bigger system, Opensuse and 16 m , Amd box, but we
are pure development.
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 25, 2012, at 10:43 AM, Edward Jaffe edja...@phoenixsoftware.com wrote:
On 4/25/2012 7:24 AM, Joel C. Ewing wrote
Yep dongles are not fool proof, then can break...it's hardware..I don't get the
reason for dongles..
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 25, 2012, at 11:56 AM, Mike Schwab mike.a.sch...@gmail.com wrote:
On Wed, Apr 25, 2012 at 10:43 AM, Joel C. Ewing jcew
Found our issue, Ty
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 20, 2012, at 6:54 PM, Scott Ford scott_j_f...@yahoo.com wrote:
All,
I have a question, we have a COBOL Tcpip client, server hybrid.
We drive with the destination ip address or dns host name and port
Ron,
There are all the Navy ships to USS ..United States Ship
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 21, 2012, at 4:39 PM, Ron Hawkins ronjhawk...@sbcglobal.net wrote:
Well, shouldn't that be USST? But yes cobber, it could be a contraction of
Unix System Services
I know CA-MIM , if memory serves me correctly works across Plexes and Lpars.
I am not sure if it works across Unix file systems in a similar manner
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 20, 2012, at 9:43 AM, David Crayford dcrayf...@gmail.com wrote:
Synchronizing
logic wrong, that all you have to do is re drive gethostbyname and then
ezacic08 ?
This is written in CICS sockets.
Any help is much appreciated.
Scott Ford
Senior Systems Engineer
www.identityforge.com
--
For IBM-MAIN
) THEN
..so on so forth.
Depends on what you are doing ...
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Bill Ashton bill00ash...@gmail.com
To: IBM-MAIN@bama.ua.edu
Sent: Wednesday, April 18, 2012 9:51 AM
Subject: Re: Execute certian
not the way you want too
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 17, 2012, at 9:12 AM, Jeff Holst jeff.ho...@fiserv.com wrote:
Without the GO TO, Grace Hopper might have been forever stuck in Japan.
Many years ago, I was at an ACM meeting where Grace Hopper
Lloyd,
My father was a Unisys CE at the Fort for many years...
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 17, 2012, at 8:17 AM, Lloyd Fuller leful...@sbcglobal.net wrote:
In 1969, and until sometime in the 1970s or later, the Army programming
school
was at Fort
Yes sir, for many years, large systems CE ...
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 17, 2012, at 10:07 AM, Lloyd Fuller leful...@sbcglobal.net wrote:
Probably at the Army Finance Center there. I think that they used Unisys.
Lloyd
- Original Message
pointers.
Regards
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 13, 2012, at 11:11 PM, Walt Farrell walt.farr...@gmail.com wrote:
On Fri, 13 Apr 2012 15:05:57 -0400, Scott Ford scott_j_f...@yahoo.com wrote:
Reading through this thread, quickly, it very obvious that certain
,
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 14, 2012, at 11:37 AM, R.S. r.skoru...@bremultibank.com.pl wrote:
Good idea, wrong address. Walt is retired.
However the idea is really good. There many cases where IBM should prepare
some sample exits (*). Even (as usually
Hey Bob,
What us users of z/Pdt ?
Sent from my iPad
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 12, 2012, at 12:41 PM, Bob Shannon bshan...@rocketsoftware.com wrote:
What about folks not running Z9 for z/os 2.1 ?
2.1 requires an architectural level set.
If you
Bob,
Will do and thank you
Sent from my iPad
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 13, 2012, at 9:16 AM, Bob Shannon bshan...@rocketsoftware.com wrote:
What us users of z/Pdt ?
Well, everything I know came from the SOD. I have no inside information.
Having said
John,
I can tell you where the kool-aid was made too...
Sent from my iPad
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 12, 2012, at 1:23 PM, McKown, John john.mck...@healthmarkets.com
wrote:
IBM has drunk the Kool-Aid. It is Windows only. Curiously, it is mainly Java
if IBM supports ICHPWX01 in C ...
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 13, 2012, at 2:53 PM, McKown, John john.mck...@healthmarkets.com
wrote:
Sounds like what is done by the GNU compiler people. From what I've read, all
the GNU compilers utilize the same back end
So very true, but since I can remember companies just wouldn't buy neat
software/ hardware, they had to cost justify, especially when money was tight,
like nowadays. I understand that, but there are better approaches and mouse
traps to aid in productivity..
Scott Ford
Senior Systems Engineer
I learned PL/1 on OS/VS2/HASP ( duck ) I really liked it but didn't
catch, then worked a VM VSE shop running Plancode in a ICCF, horrible slow on a
4381...
OpenCobol haven't seen or worked with, love Open Object Rexx
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr
* Company: Identityforge,LLC
* Date: 04-12-2012
* Author: Scott Ford
Thanks Kirk much appreciated, I will give a try a little later
Scott J Ford
Software Engineer
http://www.identityforge.com
From: Kirk Wolf k...@dovetail.com
To: IBM-MAIN@bama.ua.edu
Sent: Friday, April 13, 2012 5:50 PM
Subject: Re: __console2()
Scott
Bob,
What about folks not running Z9 for z/os 2.1 ?
Sent from my iPad
Scott Ford
Senior Systems Engineer
www.identityforge.com
On Apr 12, 2012, at 10:26 AM, Bob Shannon bshan...@rocketsoftware.com wrote:
and seems to me the code is not very modern
First, there are structures in the BCP
1 - 100 of 2634 matches
Mail list logo
