TN3270 connection fail
Hi List,
Thanks for your help.
Recently I encounter a problem that IKT100I USERID CANCELED immediately
after TN3270 connection fail, and It is unacceptable in our shop, because
users will lose their work that do not save in time. From SYSLOG I only got
IKT100I
-
From: chen lucky chenluck...@gmail.com
To: IBM-MAIN@bama.ua.edu
Sent: Saturday, March 3, 2012 12:08:17 AM
Subject: IKT100I USERID CANCELED immediately after TN3270 connection fail
Hi List,
Thanks for your help.
Recently I encounter a problem that IKT100I USERID CANCELED immediately
after
chen lucky wrote:
I just want to know why my TSU address space was canceled duo to connection
failure.
About this subject, look forward that I can get more help and can get it over
at end.
Is it a problem of one or many users?
One or many building / city / province?
Is it with a specific PC /
Alan,
I actually did not get any other message ahead of IKT100I, after that, user
address space got canceled with abend code S622. So I think IKT100I would
be the root cause of this problem.
BTW, how to check whether message got suppressed or not? thank you.
2012/3/5 A.Watthey
, none of the five items you mention below seem to my untrained eye
to be related to connection failures.
- Original Message -
From: chen lucky chenluck...@gmail.com
To: IBM-MAIN@bama.ua.edu
Sent: Sunday, March 4, 2012 7:03:42 PM
Subject: Re: IKT100I USERID CANCELED immediately after TN3270
Since the posting included the use of PCOMM (if I recall) then perhaps there
are some settings in PCOMM that might reduce the Likelihood of cancelling the
tso id.
Connection Timeout
This value specifies the number of seconds that Personal Communications should
wait for a connection to the
immediately after TN3270
connection fail
Sent by:IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
This thread has nothing to do with ISPF. I just want to know why my TSU
address space was canceled duo to connection failure.
But thank you all the same. I had checked following point that may
In 4f529f6f.8090...@acm.org, on 03/03/2012
at 04:47 PM, Joel C. Ewing jcew...@acm.org said:
This sounds like a user training problem. Users should be taught
in the scenario you describe to use EDIT on the new member name,
within EDIT use COPY to pull in the old member contents,
What does
This thread has nothing to do with ISPF. I just want to know why my TSU
address space was canceled duo to connection failure.
But thank you all the same. I had checked following point that may be
related to this problem.
1, JWT in SMFPRMxx
2, RECONLIM in TSOKEYxx
3, INACTIVE, KEEPINACTIVE and
and the timings. Nothing obvious
springs to mind.
Regards,
Alan.
-Original Message-
From: IBM TCP/IP List [mailto:ibmtc...@vm.marist.edu] On Behalf Of chen
lucky
Sent: 04 March 2012 10:53
To: ibmtc...@vm.marist.edu
Subject: Re: IKT100I USERID CANCELED immediately after TN3270
Hi List,
Thanks for your help.
Recently I encounter a problem that IKT100I USERID CANCELED immediately
after TN3270 connection fail, and It is unacceptable in our shop, because
users will lose their work that do not save in time. From SYSLOG I only got
IKT100I, no other information was found. I
that IKT100I USERID CANCELED immediately
after TN3270 connection fail, and It is unacceptable in our shop, because
users will lose their work that do not save in time. From SYSLOG I only got
IKT100I, no other information was found. I tried to searched it using
GOOGLE, but with not lucky. Following
TN3270 connection fail
Hi List,
Thanks for your help.
Recently I encounter a problem that IKT100I USERID CANCELED immediately
after TN3270 connection fail, and It is unacceptable in our shop, because
users will lose their work that do not save in time
immediately after TN3270 connection fail
Hi List,
Thanks for your help.
Recently I encounter a problem that IKT100I USERID CANCELED immediately
after TN3270 connection fail, and It is unacceptable in our shop, because
users will lose their work that do not save in time
YES, this is one option. But some user have the habit that do a lot of
edition in view
mode, then create a new member on behalf of it. So if the user can
reconnect to the
remain session after connection failure, this should be the best choice.
thanks.
Do you have a session manager like
chen lucky wrote:
YES, this is one option. But some user have the habit that do a lot of
edition in view mode, then create a new member on behalf of it. So if the
user can reconnect to the remain session after connection failure, this
should be the best choice.
thanks.
2012/3/3
Hi Lizette,
We do not have session manager installed in our env. thanks for your help.
2012/3/4 Lizette Koehler stars...@mindspring.com
YES, this is one option. But some user have the habit that do a lot of
edition in view
mode, then create a new member on behalf of it. So if the user can
considered setting the
Recover option for your users?
- Original Message -
From: chen luckychenluck...@gmail.com
To: IBM-MAIN@bama.ua.edu
Sent: Saturday, March 3, 2012 2:08:17 AM
Subject: IKT100I USERID CANCELED immediately after TN3270 connection fail
Hi List,
Thanks for your help
18 matches
Mail list logo
