From my limitied knowledge you will only have to perform the ACTIVATE.
Howard Rifkind [EMAIL PROTECTED] wrote: I just added a volume to my SMS
SGDEVE goup and after looking for it with ISMF I saw that it was there.
All id did was run an ickdsf job (init) with the STGR parameter.
My question
Issue command D SMS,VOL(volser) on your console. If it comes back with
CBR1064I Command rejected. Volume serial number volser undefined.
You need to validate and activate the updated sms configuration. You
don't need to translate the ACS routine(s) unless you made a change to
them.
Regards,
John
You will need to do the ACTIVATE.
Howard Rifkind [EMAIL PROTECTED] wrote: I just added a volume to my SMS
SGDEVE goup and after looking for it with ISMF I saw that it was there.
All id did was run an ickdsf job (init) with the STGR parameter.
My question is do I have to do a Translate,
Sent: Wednesday, October 18, 2006 8:24 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Quick SMS Question.
You will need to do the ACTIVATE.
Howard Rifkind [EMAIL PROTECTED] wrote: I just added a volume to my SMS
SGDEVE goup and after looking for it with ISMF I saw that it was there.
All id did
On Wed, 18 Oct 2006 05:23:39 -0700, willie bunter [EMAIL PROTECTED]
wrote:
You will need to do the ACTIVATE.
Howard Rifkind [EMAIL PROTECTED] wrote:
I just added a volume to my SMS SGDEVE goup and after looking for
it with ISMF I saw that it was there.
All id did was run an ickdsf job (init)
'.
If yes, then do nothing as Tom advises.
If no, then Activate your SCDS.
From: Tom Marchant [mailto:[EMAIL PROTECTED]
Sent: Wed 10/18/2006 8:47 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Quick SMS Question.
On Wed, 18 Oct 2006 05:23:39 -0700, willie bunter
-- snip --
If the volume was _already_ defined in the storage group, then you did
the init, you should just be able to vary it online. You need to do
-- snip --
The SMS volume status should also be set to ENABLE. This many not be the
case depending on how the volume(s) were initially added to the
I just added a volume to my SMS SGDEVE goup and after looking for it with ISMF
I saw that it was there.
All id did was run an ickdsf job (init) with the STGR parameter.
My question is do I have to do a Translate, Validate, Activate on the ACD
routines before I can use the volume?
-Original Message-
From: IBM Mainframe Discussion List
[mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind
Sent: Monday, April 03, 2006 12:56 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Quick SMS Question.
I just added a volume to my SMS SGDEVE goup and after looking
John wrote:
My question is do I have to do a Translate, Validate,
Activate on the ACD routines before I can use the volume?
The activation only is necessary.
Hope this helps,
George Rodriguez
abc Distributing, LLC
(305) 919-1900 ext. 21246
mailto:[EMAIL PROTECTED]
Thanks John,
McKown, John [EMAIL PROTECTED] wrote: -Original Message-
From: IBM Mainframe Discussion List
[mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind
Sent: Monday, April 03, 2006 12:56 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Quick SMS Question.
I just added a volume
@BAMA.UA.EDU
cc
Subject
Quick SMS Question.
I just added a volume to my SMS SGDEVE goup and after looking for it with
ISMF I saw that it was there.
All id did was run an ickdsf job (init) with the STGR parameter.
My question is do I have to do a Translate, Validate, Activate on the
ACD
12 matches
Mail list logo