I work with Ross and can explain what he is trying to accomplish. We have
a Db2 v13 Global zone for Db2 along with its associated target and DLIB
zones. We have several Db2 related products (Admin Tool, etc) installed
into the Db2 global with their own target and dlib zones. He wants to
Hi
I noticed a lot of the info regarding to the abending programs in a ARR
recovery routine( for a space switching pc rtn) point to the Home address
space such as SDWARBAD that address is from the home address space RB
Wanting to get info on the PC rtn running in Primary I coded a CSVQUERY
I am assuming you are speaking of DASD based data sets rather than those on
tape or any other medium.
I would have said use EXCP until recently. In addition you would need to be APF
authorised in order to open VSAM datasets using EXCP.
However, I understand however that there are some
On Thu, 14 Dec 2023 22:22:51 +, Kurt Quackenbush wrote:
>> NAME ABCDITSK ABCPROC#C C_CODE
>
>I believe SMP/E supports a maximum of 8 characters for the LMOD, CSECT, and
>CLASS names specified on the IMASPZAP NAME statement. CSECT name ABCPROC#C is
>9 characters.
>
If the section name was
> NAME ABCDITSK ABCPROC#C C_CODE
I believe SMP/E supports a maximum of 8 characters for the LMOD, CSECT, and
CLASS names specified on the IMASPZAP NAME statement. CSECT name ABCPROC#C is
9 characters.
Kurt Quackenbush
IBM | z/OS SMP/E and z/OSMF Software Management | ku...@us.ibm.com
Binyamin wrote:
>Unless you are sending this via teletype or FAX, I question why you
>would provide a zap rather than a module replacement.
Well, we've been discussing that already. But we'd like to understand it at
least.
Meanwhile, Tom Marchant's suggestion sounded helpful, except it's C
This statement is very confusing to me?So for DB2V13 is installed in its
own global zone, with target and dlib zones.It’s the next part of your
statement “use my existing target and dlib zones and update ddefs…” that is
confusing me. It sounds like you are trying to marry your V13
You might want to look at the sysres cloning example on my web site / CBT file
434 also as that
clones the SMP/E ZONEs with it. I don't clone the DLIB volser(s) / zones these
days (haven't
in many years), but you can easily see how it is done. See URL below.
Regards,
Mark
--
Mark Zelden -
Thanks for the info Tom.
I had planned to use the ZONEEDIT to update my DDDEFs as well, so thanks for
that confirmation.
Ross
> On Dec 14, 2023, at 12:44 PM, Tom Marchant
> <000a2a8c2020-dmarc-requ...@listserv.ua.edu> wrote:
>
> I should have added that when I clone zones, I like to
>> What is the STC RSED? Is it something I need or can I shut it down and
>> remove the software?
Lizette,
It is a started task for IDZ (IBM Developer for Z) which will be used to
connect to HOST systems from IDZ.
https://www.ibm.com/docs/en/developer-for-zos/9.1.1?topic=f-rse-daemon
If the STC proc looks similar to this, it’s a part of z/explorer and/or iDZ.
You could shut it down, and see who complains. There is usually a JMON task
that goes with it for JES interface.
//RSED PROC IVP=, * 'IVP' to do an IVP
//PORT=,
//
What is the STC RSED? Is it something I need or can I shut it down and
remove the software?
I have very little documentation on this function and how it is used in a
Mainframe
Thank you
Lizette
--
For IBM-MAIN
I should have added that when I clone zones, I like to copy the SMPLOG as well,
so that the full history is preserved. Don't forget to define the disposition
for SMPLOG as MOD or the SMPLOG will be useless.
--
Tom Marchant
On Thu, 14 Dec 2023 12:31:15 -0600, Tom Marchant
wrote:
>Create a
Create a new ZONEINDEX in the Global zone for each new zone (target and DLIB),
and relate them to each other.
If each zone is in its own CSI you can copy with IDCAMS REPRO. Otherwise use
ZONECOPY.
You can use ZONEEDIT to change the DDDEFs in your new zone(s). Don't forget
that the target zone
On Thu, 14 Dec 2023 15:43:40 +, Billy Ashton wrote:
>..
>Is there any way to do this without caring about the catalog RECFM?
>Obviously, the easiest way is through some JCL parameter that says
>"force as PS" but I doubt that is likely. I can't go into more detail at
>present, sorry!
>
Unless you are sending this via teletype or FAX, I question why you would
provide a zap rather than a module replacement.
On Thu, 14 Dec 2023 11:54:28 -0500 Phil Smith III wrote:
:>From a coworker, who tried to post but it seems to have vanished-not even a
bounce?! If it just got stuck
Does this help, from the SMP/E User's Guide:
The superzap control statements are the same as you would use if you were
calling
the superzap utility. The only exception is that on the NAME statement, you
should
specify only the CSECT name within the distribution library module, rather than
Oh. It does say:
"If TLS V1.3 is negotiated for a secure connection, certificate validation is
done according to RFC 5280 unless explicitly specified."
but also still says "The default value is ANY."
That seems a tad bit unclear, should be more like:
" The default value is ANY, unless TLS V1.3
I’m upgrading a product in my DB2v13 global zone. I plan to use my existing
target & DLIB zones and just update my DDDEFs to point to my new dataset names.
My question is - if I want to create new CSI’s (copied from my existing CSIs)
for the target & DLIB what’s the best way to point the
You may need additional authorization, but EXCP is definitely the way to go.
Parsing the raw data once you've read them might be sticky.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
עַם יִשְׂרָאֵל חַי
נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר
From:
On Thu, 14 Dec 2023 15:43:40 + Billy Ashton
wrote:
:>Hey everyone! I have a little down time here at the end of the year with
:>our freeze, and I wanted to play with some ideas I have had.
:>I would like to write a program that can open any kind of file - PDS,
:>Sequential, Panvalet,
>From a coworker, who tried to post but it seems to have vanished-not even a
>bounce?! If it just got stuck somewhere, this might be a duplicate, sorry.
I am having problems trying to convert a normal ZOS AMASPZAP to a SMPE ++ZAP.
When I run the zap through a standalone AMASPZAP
Chris Meyer wrote:
>I checked with the System SSL folks on this.
>It sounds like what you're observing is a difference in default System
>SSL certificate validation mode settings Between TLSv1.2 and TLSv1.3.
>See the description of the System SSL GSK_CERT_VALIDATION_MODE
>parameter in this
Is FAMS-level I/O publicly documented, or only for NDA+$?
Peter
From: IBM Mainframe Discussion List On Behalf Of Tom
Brennan
Sent: Thursday, December 14, 2023 11:35 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Can this be done?
Like Mike said, run your own CCW's with EXCP or similar.
Like Mike said, run your own CCW's with EXCP or similar. But you could
also get a quick look with a program that already does this, such as:
//ADRDSSU EXEC PGM=ADRDSSU
//SYSPRINT DD SYSOUT=*
//VOL DD UNIT=3390,VOL=SER=VOLSER,DISP=OLD
//SYSIN DD *
PRINT INDD(VOL)
EXCP (execute channel program)
Cyl 0 trk 0 is volume label, points to VTOC which holds DSCB records.
DCSB has DSN, DSORG, RECFM, LRECL, BLKSIZE, tracks, etc.
On Thu, Dec 14, 2023 at 9:44 AM Billy Ashton wrote:
> Hey everyone! I have a little down time here at the end of the year with
> our
Billy,
Just out of curiosity what is the main intent of the request ? Get the raw
data and then do what? Edit/ Print ?
Also, when you get a pds , do you process ALL the members ? or any specific
member? How do you distinguish it?
Thanks,
Kolusu
If you use SVC 99, you can query the dataset to find out what it
is. And then you can do SVC99 to allocate.
It will keep you busy for a while understanding the text units
and looking at control blocks
Steve Thompson
On 12/14/2023 10:43 AM, Billy Ashton wrote:
Hey everyone! I have a
I just converted legacy Passtickets to ENCRYPTED mode.
That is related with new keys in ICSF CKDS.
Just for testing purposes I also created few Ehanced Passticket
(PTKTDATA) profiles. Used some dummy labels, however no key entry was
created in CKDS repository.
Q: Should I manually create
Hey everyone! I have a little down time here at the end of the year with
our freeze, and I wanted to play with some ideas I have had.
I would like to write a program that can open any kind of file - PDS,
Sequential, Panvalet, loadlib, and maybe even VSAM components. I want to
open the file in
30 matches
Mail list logo