An update, and more weirdness.
Alan Altmark posted an update to create a .java.policy that didn't appear to
work for me.
I had our CE upgrade the HMC microcode to Driver 22 and I still couldn't access
the integrated console or operating system messages.
One of our sysprogs who works
Thanks to those who suggested checking for pop-ups etc.
None of that worked.
After seeing the post about an open PMR where IBM acknowledged problems with
JAVA 8 I uninstalled it and went back to JAVA7_21.
Now my integrated console and operating system messages are available again.
Alan
Did you POR with the correct IOCDS?
- Original Message -
From: mf db [dbajava...@gmail.com]
Sent: 10/12/2014 06:26 PM ZE5B
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: LPAR loaded but no response
Corrective action : Verify that the device exists for the logical partition
in the IOCDS. If
more likely this is not correct : PATCH(X'0088' '0002')
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Gross, Randall [PRI-1PP] randy.gr...@primerica.com
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 07/23/2014 13:20
Subject
LR R8,R13
+6LLGTR13,540
+CBCR 15,R14
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Chase, John jch...@ussco.com
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 07/16/2014 12:40
Subject:Secret
= word(codes,sba2)
say DCX'11,sba1,sba2'
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Micheal Butz michealb...@comcast.net
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 05/15/2014 13:59
Subject:Re: TSO 3270 Data Stream
.
+PUAUXMON AdSpace TIVI5 1 %206 Megs.
+PUAUXMON Occupied Aux.Storage 7743 Megs.
+PUAUXMON Occupied Aux.Storage 42 %.
ASCBSLOT does PUTs to SYSPRINT so you can run it on TSO or in batch.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546
Dave,
Are the members card image or something else?
The only sequential dataset IEBCOPY works with is one that it created by
unloading a PDS.
I think you want IEBGENER
//SYSUT1 DD DISP=SHR,DSN=seqdataset
//SYSUT2 DD DISP=SHR,DSN=aaa(DRSSKEY)
Alan Field
Technical Engineer Principal
BCBS
Do these lpars have image profiles defined?
Do you need to go into the HMC and config the channels offline to the
offending lpars before trying to do the activate?
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Dick Bond
In the HCD diaslogs, select 2, then 11 then S and then put a / against the
A0. It will give you choices. I forget which one E or W I think will
remove the write protect.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Dazzo, Matt
Isn't there a VLSHORT keyword you can specify that will prevent this
error?
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Micheal Butz michealb...@optonline.net
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 02/13/2014 18:46
Subject
Could you move the index so that is is on one or more of the same volumes
as the data, thereby getting below the 59 volume limit?
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Guy Eshel guyes...@hotmail.com
To: IBM-MAIN
ISPF in z/SO 2.1 allows scroll amounts .
Not on my 2.1 system :)
I've read documents from Marna Walle and Pete vanDyke.
I increased the SCROLL_MAX value in ISPCFIGU. I set RESET_SCROLL_VALUE to
YES and still I can't scroll greater than .
So what have I missed?
Thanks
Alan Field
Yes. I was shipped in applied and accepted status with my z/OS 2.1 order.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Peter X. DeFabritus pxdef...@gmail.com
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 02/10/2014 13:28
Subject
No. ZXSMAX wasn't in the list. I added it with a value of 9. Logged
off/on. It didn't make a difference.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Peter X. DeFabritus pxdef...@gmail.com
To: IBM-MAIN@LISTSERV.UA.EDU
Thank you Peter. The piece I was missing I think was the ZVERMOD setting.
After reading up on it and incrementing it I can now scroll
Problem resolved.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Peter X. DeFabritus
I didn't go to college. Straight into System Programming from High School.
Spent my first week on the job in the punch pool learning how to work an
029.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
I think it is well established
Are you applying maintenance to your active system? It looks like you might
have. Try compressing SYS1.LINKLIB using a batch on then do an LLA refresh. If
your linklist datset(s) have gone into extents an ipl will be needed to recover.
- Original Message -
From: venkat kulkarni
This happens to me all the time. After applying maintenance to SMP/E
you've updated the SMPCPATH dataset which has now got out of synch with
the rest of SMPE.
Quickest resolution is to steplib to the SYS1.MIGLIB that also got updated
by the same APPLY.
Alan Field
Technical Engineer Principal
DD UNIT=SYSDA,SPACE=(CYL,(4369,1),RLSE)
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Jake anderson justmainfra...@gmail.com
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 12/13/2013 04:57
Subject:TRSMAIN - Influencing
Yes. When you request to add capacity on the HMC you are presented with a
list of all increments from your base up to the maximum CoD.
Last year we made our 509 a 510, then a 512 and back to a 511.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile
Possibly because many of us don't run Session manager.
Here's what I get: SESSION MANAGER NOT ACTIVE - SMCOPY IGNORED in response
to the SMCOPY command.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Steve Comstock st
Simply from option 6 I entered SMCOPY
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Steve Comstock st...@trainersfriend.com
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 11/06/2013 08:58
Subject:Re: Aging Sysprogs = Aging
You need the MACLIB that is distributed with SHOWZOS.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: John Norgauer john.norga...@ucdmc.ucdavis.edu
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 10/31/2013 16:19
Subject
I was talking to a friend who had heard there were discussions within IBM
about discontinuing Red Books and/or discontinuing the Red Book
residencies.
I find the red books extremely useful and would be disappointed if this
happens.
Has anyone else heard of this change of direction?
Alan
Is device xxx defined in the IOCDS. Is xxx defined in the CONSOLxx member.
- Original Message -
From: גדי בן אבי [gad...@malam.com]
Sent: 09/11/2013 06:35 PM ZE3
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: IEE313I when varying a console online
Hi,
I am in the process of installing a 2074
Have you IPL'd the system since it was added to the CONSOLxx member?
There is no way (until z/OS 2.1) to dynamically add a console.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: גדי בן אבי gad...@malam.com
To: IBM-MAIN
reference the path /u/cics/wsbinds and be redirected
to /u/wsbinds automatically.
From: Alan Field alan_c_fi...@bluecrossmn.com
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 07/19/2013 14:10
Subject:NFS automount help requested
Sent by:IBM Mainframe Discussion List IBM-MAIN
Alan Field
Technical Engineer Principal
BCBS Minnesota
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Wouldn't open with IE on WINdows 7. Says I need to download java.
Worked fine in Firefox.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Norman.Hollander norman.hollan...@desertwiz.biz
To: IBM-MAIN@LISTSERV.UA.EDU,
Date: 06
To make it clear, the installer won't run on Windows 7 but the XMITMGR
program runs just fine.
So as others have suggested copy XMITMGR.EXE from an XP system and store
it in Program Field (x86) on the Windows 7 machine and you should be fine.
Alan Field
Technical Engineer Principal
BCBS
a software activate to
get back in sync.
Is a POR still the only way to straighten out this mess?
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
--
For IBM-MAIN subscribe
Any one else having problems with
https://eccgw01.boulder.ibm.com/services/projects/ecc/ws/.
For three days I've been trying to download holddata and both Boulder and
Rochester fail after waiting for 120 minutes.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546
Skip,
I recall trying this once. When I converted the name to * it lost all the
chpid/device info.
I decided that the function was pretty useless (as far as renaming an
lpar) is concerned.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
I suspect they derive from assembler coding that looks like this (R15
needs to contain a value that is a multiple of 4):
B BRTABLE(R15)
BRTABLE B CODE00
B CODE04
B CODE08
B CODE0C
B CODE10
Alan Field
Technical
.
Alan Field
Technical Engineer Principal
BCBS Minnesota
From: Mohamed Juma mmj...@yahoo.com
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 05/02/2013 14:06
Subject:CFRM Policy with new CPU
Sent by:IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU
Hi
We are in migration
runs in lpar CF1 etc.
I'm thinking at some point I'll change the CFRM policy back to CF1 and CF2
to match the LPAR names.
Yes - you need to make this change on your running system before you IPL
the new system.
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546
As well as WLMTOOL there's a hidden gem in RMF II to display these values. I
forget exactly where and can't look it up right now.
- Original Message -
From: Mark Zelden [m...@mzelden.com]
Sent: 01/30/2013 01:50 PM CST
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: TPI and CPENABLE
On Wed,
I seem to recall a S DEALLOC command issued from the console (console
being a modified SELECTRIC typewriter)
and
//DEALLOC PROC
//S1 EXEC PGM=IEFBR14
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Elardus Engelbrecht
If I turn on Capacity on Demand (i.e. make our 507 look like a 509 say)
will our software that looks at CPU model recognise the change?
I seem to recall that in a past life it didn't, unless you IPL while CoD
is turned on.
Thanks
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone
At a previous job when I did a DA the results were equivalent to a DA
OSTC. Now when I do a DA it is equivalent to DA OJOB. I'm at a class this
week where DA is equivalent to DA OSTC.
How do I set DA to default to OSTC. Google and the SDF manual haven't been
much help.
Thanks
Alan Field
SDSF Server
Alan Field
Technical Engineer Principal
BCBS Minnesota
Phone: 651.662.3546 Mobile: 651.428.8826
From: Lizette Koehler stars...@mindspring.com
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 11/15/2012 07:50
Subject:Re: SDSF DA command
Sent by:IBM Mainframe
42 matches
Mail list logo