First off, thank you to all that responded to this inquiry.
Some additional information:
On our systems that are still running on the z/14 processor, the triplets,
Offset, Length, and Count are all present in the SMF type 30 record.
The products in question are using the unauthorized method
In my SMF experience ...
If the triplet offset or count field is zero then the segment does not
exist. End of story.
If the triplet length field is zero then
- For most SMF record types that means the segment does not exist.
- For Db2, and perhaps a few other types, it means each segment contains
Duh, Go to OFFSET and INPUT the LENGTH field.
Barry
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Barry Merrill
Sent: Friday, December 11, 2020 11:02 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Z15 zedc compression and CONNECT DIRECT, MFT compression
It is very
t: Re: Z15 zedc compression and CONNECT DIRECT, MFT compression
If you are using MXG with SAS, its likely you might need an update there?
_
Dave Jousma
AVP | Director, Technology Engineering
F
| Grand Rapids, MI
49546
616.653.8429 | fax: 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Kenneth J. Kripke
Sent: Wednesday, December 9, 2020 12:52 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Z15 zedc compression and CONNECT DIRECT, MFT compression
W dniu 09.12.2020 o 18:52, Kenneth J. Kripke pisze:
Hello;
We have upgraded from a Z14 to Z15 processor, and, have experienced
something curious regarding the SMF TYPE 30 section being generated for
Connect Direct as well as Tibco's MFT 8.0 file transfer products.
Both products are enable
Hello;
We have upgraded from a Z14 to Z15 processor, and, have experienced
something curious regarding the SMF TYPE 30 section being generated for
Connect Direct as well as Tibco's MFT 8.0 file transfer products.
Both products are enabled to use ZEDC compression, but, when generating SAS