OpenEdition was announced as a feature of VM/ESA version 2.1 in
https://www.ibm.com/docs/en/announcements/archive/ENUS294-524. With z/VM
version 3.1 it was integrated into the base as OpenExtensions in
https://www.ibm.com/docs/en/announcements/archive/ENUS200-358.
Regards, Jim
I do a lot of zCP3000 studies and most customers sending me data seem to be
using a 15 minute interval. I have a couple using 30 minutes (and one 20
minutes), but I prefer 15 minutes for my studies.
Regards, Jim
--
For
Peter:
Hopefully you would not need to. However, since enabling SMT requires you to
re-IPL z/OS, it is nice to be able to switch from SMT-2 to SMT-1, if you are
having performance issues, without a re-IPL. I have seen very good results from
SMT-2 in my customers, but there could always be that
Mark:
Thanks. Searching through the doc I could not find this, but obviously I was
searching with the wrong terms.
Regards, Jim
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
I know you can do this, but I can't seem to find the right command in z/OS.
Any help much appreciated. In z/VM I use SET MULTITHREAD to do this.
Jim Elliott
Senior IT Consultant - GlassHouse Systems Inc.
--
For IBM-MAIN
Found it. POR shows up in the Audit log on the HMC.
Jim
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Michael:
I think that is just the HMC. I had already found that (Shutdown or Restart) in
the tasks performed log, but everything else in that log seems to be HMC
related.
Jim
--
For IBM-MAIN subscribe / signoff / archive
Is there a way to find on the HMC (or SE) the date and time of the last
Power-On Reset of a system?
Jim Elliott
Senior IT Consultant - GlassHouse Systems Inc.
--
For IBM-MAIN subscribe / signoff / archive access instructions
Thanks for all the responses. I should have explained what z/VM Link
Aggregation is. This is not about sharing an OSA port between multiple LPARs
(that is easy). With a z/VM vswitch you can connect up to 8 OSA ports to a
single vswitch. Turns out there is no direct equivalent in z/OS, you use
I am sure that z/OS must provide a function equivalent to z/VM's Link
Aggregation (where you can share physical OSA ports in a VSwitch), but lots
of Google searches are not helping me. Any suggestions?
Jim Elliott
Senior IT Consultant - GlassHouse Systems Inc
esByDocid/9C69415C1E82603C852576700058075A?OpenDocument>
SA22-7871-11
On the IBM Support web site are the updated HLASM opcodes, APAR PH39324,
OPTABLE value Z16 <https://www.ibm.com/support/pages/node/6567011>
Jim Elliott
Senior IT Consultant - Glas
(at least I can't find one) so any advice / suggestions would be
appreciated. You can reply here or via e-mail. Thanks in advance.
Jim Elliott
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
Server Time Protocol Guide
(which has never been published and has been in draft status since August
3, 2020) but would like to find something more.
Jim Elliott
Senior IT Consultant - GlassHouse Systems Inc.
--
For IBM-MAIN subscribe
Binyamin,
Not a command, but a full screen utility. Check out my FERRET package at
http://www.vm.ibm.com/download/packages/descript.cgi?FERRET
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
I was working in the IBM Toronto Lab prior to the 3279 announcement and was a
tester for the product (developed at IBM Hursley). Somewhere I have a photo of
myself sitting at my 3279 when I got an award. I still have a copy of a
pre-announce version of a paper on developing colour applications
I don't see my reply here, so I will post it again. Check out my page
https://jlelliotton.blogspot.com/p/cmos-processor-table.html
Regards, Jim
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Tony,
Check my CMOS Processor Table page at
https://jlelliotton.blogspot.com/p/cmos-processor-table.html. I have the z/OS
and z/VM level sets listed there.
Regards, Jim
--
For IBM-MAIN subscribe / signoff / archive access
Feature Code 6802: SRB Upgrade Record (annual charge) and Feature Code 9930:
SRB Upgrade Authorization (no charge) are required only to make use of the
optional System Recovery Boost Upgrade Record, which allows the temporary
activation of additional zIIP processor resources in conjunction with
Not only is z/OS 1.13 not supported in the same sysplex with z/OS 2.3, I am
pretty sure it won’t work. Every release has sysplex changes which often
(always?) require PTFs to the prior 2 releases to participate in the same
sysplex. Even if no PTFs are required, I suspect z/OS checks to see the
We have an issue where the 2 Support Elements on a z14 (3907) don't have the
same clock value and don't match the HMC clock. The HMC is getting the time
from an NTP server. There is no STP in this environment, and all the doc seems
to talk about using STP. How do we get the SEs to sync up to
Thanks! I did not try View port parameters.
Regards, Jim
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I am trying to find the MAC address for OSA-ICC (CHPID OSC) ports. The HMC
guide seems to say you can find the MAC Address, but for OSC the MAC Address is
not an option to view. Any suggestions for how I find these?
Regards, Jim
Just most of the regular suspects are here at SHARE in Orlando (where it is
very hot and humid). Having a great time celebrating the 60th anniversary of
SHARE. My 1st SHARE was summer 1974!
--
For IBM-MAIN subscribe / signoff /
The official portal for all IBM Offering Information (announcement letters,
sales manual, etc.) is http://www-01.ibm.com/common/ssi/index.wss
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
On Wed, 6 Mar 2013 07:46:08 -0600, Tom Marchant m42tom-ibmm...@yahoo.com
wrote:
HLASM hasn't really changed. It would be nice if the page at
http://www.vm.ibm.com/devpages/jelliott/cmosproc.html
would be updated to include the HLASM opcode table that is
appropriate for each model. It would
Re the 3270 support.
This has been in the HMC for a long time and is used by z/VM. z/OS is finally
getting the same support (in addition to the line mode HMC console). So any
machine supported by z/OS 2.1 (i.e z9 and later) will have access to 3270 on
the HMC.
26 matches
Mail list logo
