Re: Unable to VARY ONLINE DASD after SAN power outage
Thanks Jon, I now see two new S/W problems, one mentioning that access to data has been impacted. I looked when the SAN had booted but I guess I might have been a bit too quick before that was self-diagnosed. Oh well, reboot of the SAN it is. On Sun, Aug 2, 2020 at 7:51 PM Jon Nolting wrote: > This could be the storage unit went into R/O mode to protect the existing > data. We’ve had that happen on similar old storage devices. > > See if you can check the storage HMC which might reflect the condition. We > had to “fix” whatever caused this protective condition allowing R/W access. > > Good luck > > Sent from my iPhone > > > On Aug 2, 2020, at 10:08 AM, Christian Svensson < > 022ad63487ef-dmarc-requ...@listserv.ua.edu> wrote: > > > > Hi, > > > > I have an old DS6800 running alongside my z114. Due to a power outage the > > SAN was shut down uncleanly and > > while it does not appear to indicate any failures in its logs or status > > displays, I'm having issues trying to IPL my LPARs from it. > > > > To try to debug this issue I loaded a z/VM installation DVD and had a > look > > at the devices. > > To reduce the number of potential error sources, I created a new CKD > volume > > at 03F1 in the DS6800. > > When I try to vary this device online I get: > > > > vary online 03f1 > > 12:59:33 HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > > HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > > HCPERP6306I DASD 03F1 AN EQUIPMENT CHECK WITH PERMANENT ERROR > > 12:59:33 HCPERP6306I OCCURRED > > 12:59:33 HCPERP6300I SENSE DATA FORMAT = 0F MSG CODE = 0C > > 12:59:33 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = 63 > > 12:59:33 HCPERP6302I SEEK ADDRESS = > > 12:59:33 HCPERP6303I SENSE = 1090 F1FC 0800 0004 230002CB > > 12:59:33 HCPERP6303I 0004F908 4082 0C00 > > 12:59:33 HCPERP6304I IRB = 01C04417 7FF0B010 0210 0080 > > 12:59:33 HCPERP6305I USERID = SYSTEM > > 12:59:33 HCPERP2216I CHANNEL PATH ID = F5 > > 12:59:33 HCPERP2220I PHYSICAL CHANNEL PATH ID = 011D12:59:33 HCPERP794E > > DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > > HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > > HCPERP6306I DASD 03F1 AN EQUIPMENT CHECK WITH PERMANENT ERROR > > 12:59:33 HCPERP6306I OCCURRED > > 12:59:33 HCPERP6300I SENSE DATA FORMAT = 0F MSG CODE = 0C > > 12:59:33 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = 27 > > 12:59:33 HCPERP6302I SEEK ADDRESS = > > 12:59:33 HCPERP6303I SENSE = 1090 F1FC 0800 0004 230002CB > > 12:59:33 HCPERP6303I 0004F908 4082 0C00 > > 12:59:33 HCPERP6304I IRB = 00C04017 7FE95E50 0E00 0080 > > 12:59:33 HCPERP6305I USERID = SYSTEM > > 12:59:33 HCPERP2216I CHANNEL PATH ID = F5 > > 12:59:33 HCPERP2220I PHYSICAL CHANNEL PATH ID = 011D > > 12:59:33 HCPCRC8083I EREP record threshold has been exceeded for userid > > OPEREREP. Currently 0006 records are enqueued. > > 12:59:33 HCPCPN6277I Device 03F1 cannot be varied online because I/O > errors > > occurred. > > 12:59:33 1 device(s) specified; 0 device(s) successfully varied online > > Ready(06277); T=0.01/0.01 > > > > This error is presented on the few other devices I've tried to vary > online. > > > > Any suggestions of things to try? Worst come to worst I'll power > everything > > off and do a cold boot. > > This is all a hobbyist setup so no IBM maintenance contract on anything > I'm > > afraid :-). > > > > Thanks, > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Unable to VARY ONLINE DASD after SAN power outage
This could be the storage unit went into R/O mode to protect the existing data. We’ve had that happen on similar old storage devices. See if you can check the storage HMC which might reflect the condition. We had to “fix” whatever caused this protective condition allowing R/W access. Good luck Sent from my iPhone > On Aug 2, 2020, at 10:08 AM, Christian Svensson > <022ad63487ef-dmarc-requ...@listserv.ua.edu> wrote: > > Hi, > > I have an old DS6800 running alongside my z114. Due to a power outage the > SAN was shut down uncleanly and > while it does not appear to indicate any failures in its logs or status > displays, I'm having issues trying to IPL my LPARs from it. > > To try to debug this issue I loaded a z/VM installation DVD and had a look > at the devices. > To reduce the number of potential error sources, I created a new CKD volume > at 03F1 in the DS6800. > When I try to vary this device online I get: > > vary online 03f1 > 12:59:33 HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > HCPERP6306I DASD 03F1 AN EQUIPMENT CHECK WITH PERMANENT ERROR > 12:59:33 HCPERP6306I OCCURRED > 12:59:33 HCPERP6300I SENSE DATA FORMAT = 0F MSG CODE = 0C > 12:59:33 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = 63 > 12:59:33 HCPERP6302I SEEK ADDRESS = > 12:59:33 HCPERP6303I SENSE = 1090 F1FC 0800 0004 230002CB > 12:59:33 HCPERP6303I 0004F908 4082 0C00 > 12:59:33 HCPERP6304I IRB = 01C04417 7FF0B010 0210 0080 > 12:59:33 HCPERP6305I USERID = SYSTEM > 12:59:33 HCPERP2216I CHANNEL PATH ID = F5 > 12:59:33 HCPERP2220I PHYSICAL CHANNEL PATH ID = 011D12:59:33 HCPERP794E > DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME > 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 > HCPERP6306I DASD 03F1 AN EQUIPMENT CHECK WITH PERMANENT ERROR > 12:59:33 HCPERP6306I OCCURRED > 12:59:33 HCPERP6300I SENSE DATA FORMAT = 0F MSG CODE = 0C > 12:59:33 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = 27 > 12:59:33 HCPERP6302I SEEK ADDRESS = > 12:59:33 HCPERP6303I SENSE = 1090 F1FC 0800 0004 230002CB > 12:59:33 HCPERP6303I 0004F908 4082 0C00 > 12:59:33 HCPERP6304I IRB = 00C04017 7FE95E50 0E00 0080 > 12:59:33 HCPERP6305I USERID = SYSTEM > 12:59:33 HCPERP2216I CHANNEL PATH ID = F5 > 12:59:33 HCPERP2220I PHYSICAL CHANNEL PATH ID = 011D > 12:59:33 HCPCRC8083I EREP record threshold has been exceeded for userid > OPEREREP. Currently 0006 records are enqueued. > 12:59:33 HCPCPN6277I Device 03F1 cannot be varied online because I/O errors > occurred. > 12:59:33 1 device(s) specified; 0 device(s) successfully varied online > Ready(06277); T=0.01/0.01 > > This error is presented on the few other devices I've tried to vary online. > > Any suggestions of things to try? Worst come to worst I'll power everything > off and do a cold boot. > This is all a hobbyist setup so no IBM maintenance contract on anything I'm > afraid :-). > > Thanks, > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Unable to VARY ONLINE DASD after SAN power outage
Hi, I have an old DS6800 running alongside my z114. Due to a power outage the SAN was shut down uncleanly and while it does not appear to indicate any failures in its logs or status displays, I'm having issues trying to IPL my LPARs from it. To try to debug this issue I loaded a z/VM installation DVD and had a look at the devices. To reduce the number of potential error sources, I created a new CKD volume at 03F1 in the DS6800. When I try to vary this device online I get: vary online 03f1 12:59:33 HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 HCPERP6306I DASD 03F1 AN EQUIPMENT CHECK WITH PERMANENT ERROR 12:59:33 HCPERP6306I OCCURRED 12:59:33 HCPERP6300I SENSE DATA FORMAT = 0F MSG CODE = 0C 12:59:33 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = 63 12:59:33 HCPERP6302I SEEK ADDRESS = 12:59:33 HCPERP6303I SENSE = 1090 F1FC 0800 0004 230002CB 12:59:33 HCPERP6303I 0004F908 4082 0C00 12:59:33 HCPERP6304I IRB = 01C04417 7FF0B010 0210 0080 12:59:33 HCPERP6305I USERID = SYSTEM 12:59:33 HCPERP2216I CHANNEL PATH ID = F5 12:59:33 HCPERP2220I PHYSICAL CHANNEL PATH ID = 011D12:59:33 HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 HCPERP794E DASD 03F1 - ACCESS IS PROHIBITED ON VOLUME 12:59:33 HCPERP794E DUE TO STATUS ERROR - RC = 08 - 0004.2- 1-1112:59:33 HCPERP6306I DASD 03F1 AN EQUIPMENT CHECK WITH PERMANENT ERROR 12:59:33 HCPERP6306I OCCURRED 12:59:33 HCPERP6300I SENSE DATA FORMAT = 0F MSG CODE = 0C 12:59:33 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = 27 12:59:33 HCPERP6302I SEEK ADDRESS = 12:59:33 HCPERP6303I SENSE = 1090 F1FC 0800 0004 230002CB 12:59:33 HCPERP6303I 0004F908 4082 0C00 12:59:33 HCPERP6304I IRB = 00C04017 7FE95E50 0E00 0080 12:59:33 HCPERP6305I USERID = SYSTEM 12:59:33 HCPERP2216I CHANNEL PATH ID = F5 12:59:33 HCPERP2220I PHYSICAL CHANNEL PATH ID = 011D 12:59:33 HCPCRC8083I EREP record threshold has been exceeded for userid OPEREREP. Currently 0006 records are enqueued. 12:59:33 HCPCPN6277I Device 03F1 cannot be varied online because I/O errors occurred. 12:59:33 1 device(s) specified; 0 device(s) successfully varied online Ready(06277); T=0.01/0.01 This error is presented on the few other devices I've tried to vary online. Any suggestions of things to try? Worst come to worst I'll power everything off and do a cold boot. This is all a hobbyist setup so no IBM maintenance contract on anything I'm afraid :-). Thanks, -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
