Re: [Ifeffit] Deglitching issues on Athena on latest Mac versions

[Wuhib Tamrat]

Hi Robert, 
That was also on my mind. As you may know, X11 is no longer available. What is 
instead available from Mac support and installed on my OS is X Quartz. In cases 
other than this deglitching issue, plotting function on Athena is performing 
properly.
And also when Athena opens on Mac two windows work simultaneously. “perl5.16” 
and the plotting window “X11”. So I could be wrong but my understanding is, 
even though X Quartz was the one installed, Athena is utilising it as x11.

I thank you for your advice.
Wuhib


> On 20 Dec 2015, at 21:01, Robert Gordon  wrote:
> 
> Hi Wuhib,
> 
> Many of the issues related to plotting and point picking with 0.9.22 have 
> been related to the terminal settings
> used by gnuplot. Since you searched the list and read many of the mac and 
> windows-related messages in this regard,
> you likely know this, but just in case, have you checked what terminal 
> setting you are using? 
> I believe x11 is the optimal choice for mac. That would be the first think I 
> would check.
> 
> regards,
> -R.
> 
> 
> 
> On 12/20/2015 4:45 AM, Wuhib Tamrat wrote:
>> Hi all, 
>> 
>> This is about the repeated Deglitching issues on Athena but only for latest 
>> Mac versions.
>> 
>> I know it is frustrating to be asked the same question over and over again, 
>> so I checked the mailing list several times all the way to the oldest mail 
>> dated "August 15, 2010". And, to my searching ability, issues regarding 
>> deglitching on Athena on mac have not been addressed. 
>> 
>> If it is already discussed, I apologise in advance and please kindly direct 
>> me to the discussion. 
>> 
>> I am working on the latest Demeter for "Mac version 0.9.22" on "OS X El 
>> Capitan, version 10.11”.
>> 
>> The following discussion were the only ones that I could find. They are on 
>> exactly the same issues but on Windows [Sathish on Dec, 2013 / Shoaib May, 
>> 2015 / Martina or Robert Gordon Sep, 2015 / Eva October, 2015].
>> 
>> The problem that I am facing is the same as issues described before but on 
>> Mac. So I will describe it below.
>> 
>> After moving to the "Deglitch and Truncate Data” window and choosing Chi(E) 
>> the data is plotted as “line plot” not the “blue dots”. I am assuming the 
>> second option is the proper one since that is how it appears in Windows or 
>> other working versions. That is the first issue.
>> 
>> After clicking “Choose point” and double clicking on the plot, the cross 
>> hair falls on the E0 value not on the data point (not on the glitch). That 
>> is the second issue. I have attached a screen shot image, if it will help to 
>> visualise the problem. Also project file with two data glitches is attached.
>> 
>> The closest information I got from the mailing list was from the 
>> conversation started by “Shoaib” on May 2015 for Windows versions. Bruce 
>> suggested a short work around fix by playing with the E0 value. I tried to 
>> make a bald trial of moving the E0 to the point where the glitch is, hoping 
>> the cross hair falls on the glitch data point. But that created unrealistic 
>> plots since the glitch was close to the end of the collected data points (in 
>> E). Altering the "DeglitchTruncate.pm" file in the installation directory 
>> was a clever solution by Shoaib but I am not sure how to do that on Mac.
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> Thanks
>> Wuhib
>> 
>> PS: I know some users are sending amateur emails with insufficient 
>> information but some of us are debutant researchers/students (not seasoned 
>> researchers) and will learn from our mistakes. Please be kind and polite 
>> when suggesting the correct way to do it even though it is already on  
>> http://bruceravel.github.io/demeter/pods/bugs.pod.html
>>   or other 
>> locations. Thank you.
>> 
>> 
>> 
>> 
>> 
>> ___
>> Ifeffit mailing list
>> Ifeffit@millenia.cars.aps.anl.gov 
>> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit 
>> 
>> Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit 
>> 
> 
> ___
> Ifeffit mailing list
> Ifeffit@millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
> Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

Re: [Ifeffit] Deglitching issues on Athena on latest Mac versions

[Robert Gordon]

Well, another possibility is wxt...Matt discusses using it in this thread:
http://www.mail-archive.com/ifeffit@millenia.cars.aps.anl.gov/msg05346.html

Sorry I couldn't be more help...

cheers,
-R.


On 12/20/2015 3:33 PM, Wuhib Tamrat wrote:

Hi Robert,
That was also on my mind. As you may know, X11 is no longer available. 
What is instead available from Mac support and installed on my OS is X 
Quartz. In cases other than this deglitching issue, plotting function 
on Athena is performing properly.
And also when Athena opens on Mac two windows work simultaneously. 
“perl5.16” and the plotting window “X11”. So I could be wrong but my 
understanding is, even though X Quartz was the one installed, Athena 
is utilising it as x11.


I thank you for your advice.
Wuhib


On 20 Dec 2015, at 21:01, Robert Gordon > wrote:


Hi Wuhib,

Many of the issues related to plotting and point picking with 0.9.22 
have been related to the terminal settings
used by gnuplot. Since you searched the list and read many of the mac 
and windows-related messages in this regard,
you likely know this, but just in case, have you checked what 
terminal setting you are using?
I believe x11 is the optimal choice for mac. That would be the first 
think I would check.


regards,
-R.



On 12/20/2015 4:45 AM, Wuhib Tamrat wrote:

Hi all,

This is about the repeated Deglitching issues on Athena but only for 
latest Mac versions.


I know it is frustrating to be asked the same question over and over 
again, so I checked the mailing list several times all the way to 
the oldest mail dated "August 15, 2010". And, to my searching 
ability, issues regarding deglitching on Athena on mac have not been 
addressed.


If it is already discussed, I apologise in advance and please kindly 
direct me to the discussion.


I am working on the latest Demeter for "Mac version 0.9.22" on "OS X 
El Capitan, version 10.11”.


The following discussion were the only ones that I could find. They 
are on exactly the same issues but on Windows [Sathish on Dec, 2013 
/ Shoaib May, 2015 / Martina or Robert Gordon Sep, 2015 / Eva 
October, 2015].


The problem that I am facing is the same as issues described before 
but on Mac. So I will describe it below.


After moving to the "Deglitch and Truncate Data” window and choosing 
Chi(E) the data is plotted as “line plot” not the “blue dots”. I am 
assuming the second option is the proper one since that is how it 
appears in Windows or other working versions. That is the first issue.


After clicking “Choose point” and double clicking on the plot, the 
cross hair falls on the E0 value not on the data point (not on the 
glitch). That is the second issue. I have attached a screen shot 
image, if it will help to visualise the problem. Also project file 
with two data glitches is attached.


The closest information I got from the mailing list was from the 
conversation started by “Shoaib” on May 2015 for Windows versions. 
Bruce suggested a short work around fix by playing with the E0 
value. I tried to make a bald trial of moving the E0 to the point 
where the glitch is, hoping the cross hair falls on the glitch data 
point. But that created unrealistic plots since the glitch was close 
to the end of the collected data points (in E). Altering the 
"DeglitchTruncate.pm" file in the installation directory was a 
clever solution by Shoaib but I am not sure how to do that on Mac.










Thanks
Wuhib

PS: I know some users are sending amateur emails with insufficient 
information but some of us are debutant researchers/students (not 
seasoned researchers) and will learn from our mistakes. Please be 
kind and polite when suggesting the correct way to do it even though 
it is already on 
http://bruceravel.github.io/demeter/pods/bugs.pod.html or other 
locations. Thank you.






___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe:http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov 


http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit




___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

[Ifeffit] Deglitching issues on Athena on latest Mac versions

[Wuhib Tamrat]

Hi all, This is about the repeated Deglitching issues on Athena but only for latest Mac versions.I know it is frustrating to be asked the same question over and over again, so I checked the mailing list several times all the way to the oldest mail dated "August 15, 2010". And, to my searching ability, issues regarding deglitching on Athena on mac have not been addressed. If it is already discussed, I apologise in advance and please kindly direct me to the discussion. I am working on the latest Demeter for "Mac version 0.9.22" on "OS X El Capitan, version 10.11”.The following discussion were the only ones that I could find. They are on exactly the same issues but on Windows [Sathish on Dec, 2013 / Shoaib May, 2015 / Martina or Robert Gordon Sep, 2015 / Eva October, 2015].The problem that I am facing is the same as issues described before but on Mac. So I will describe it below.After moving to the "Deglitch and Truncate Data” window and choosing Chi(E) the data is plotted as “line plot” not the “blue dots”. I am assuming the second option is the proper one since that is how it appears in Windows or other working versions. That is the first issue.After clicking “Choose point” and double clicking on the plot, the cross hair falls on the E0 value not on the data point (not on the glitch). That is the second issue. I have attached a screen shot image, if it will help to visualise the problem. Also project file with two data glitches is attached.The closest information I got from the mailing list was from the conversation started by “Shoaib” on May 2015 for Windows versions. Bruce suggested a short work around fix by playing with the E0 value. I tried to make a bald trial of moving the E0 to the point where the glitch is, hoping the cross hair falls on the glitch data point. But that created unrealistic plots since the glitch was close to the end of the collected data points (in E). Altering the "DeglitchTruncate.pm" file in the installation directory was a clever solution by Shoaib but I am not sure how to do that on Mac.

athena nCOMX13.prj
Description: Binary data
ThanksWuhibPS: I know some users are sending amateur emails with insufficient information but some of us are debutant researchers/students (not seasoned researchers) and will learn from our mistakes. Please be kind and polite when suggesting the correct way to do it even though it is already on http://bruceravel.github.io/demeter/pods/bugs.pod.html or other locations. Thank you.___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

Re: [Ifeffit] Deglitching issues on Athena on latest Mac versions

[Robert Gordon]

Hi Wuhib,

Many of the issues related to plotting and point picking with 0.9.22 
have been related to the terminal settings
used by gnuplot. Since you searched the list and read many of the mac 
and windows-related messages in this regard,
you likely know this, but just in case, have you checked what terminal 
setting you are using?
I believe x11 is the optimal choice for mac. That would be the first 
think I would check.


regards,
-R.



On 12/20/2015 4:45 AM, Wuhib Tamrat wrote:

Hi all,

This is about the repeated Deglitching issues on Athena but only for 
latest Mac versions.


I know it is frustrating to be asked the same question over and over 
again, so I checked the mailing list several times all the way to the 
oldest mail dated "August 15, 2010". And, to my searching ability, 
issues regarding deglitching on Athena on mac have not been addressed.


If it is already discussed, I apologise in advance and please kindly 
direct me to the discussion.


I am working on the latest Demeter for "Mac version 0.9.22" on "OS X 
El Capitan, version 10.11”.


The following discussion were the only ones that I could find. They 
are on exactly the same issues but on Windows [Sathish on Dec, 2013 / 
Shoaib May, 2015 / Martina or Robert Gordon Sep, 2015 / Eva October, 
2015].


The problem that I am facing is the same as issues described before 
but on Mac. So I will describe it below.


After moving to the "Deglitch and Truncate Data” window and choosing 
Chi(E) the data is plotted as “line plot” not the “blue dots”. I am 
assuming the second option is the proper one since that is how it 
appears in Windows or other working versions. That is the first issue.


After clicking “Choose point” and double clicking on the plot, the 
cross hair falls on the E0 value not on the data point (not on the 
glitch). That is the second issue. I have attached a screen shot 
image, if it will help to visualise the problem. Also project file 
with two data glitches is attached.


The closest information I got from the mailing list was from the 
conversation started by “Shoaib” on May 2015 for Windows versions. 
Bruce suggested a short work around fix by playing with the E0 value. 
I tried to make a bald trial of moving the E0 to the point where the 
glitch is, hoping the cross hair falls on the glitch data point. But 
that created unrealistic plots since the glitch was close to the end 
of the collected data points (in E). Altering the 
"DeglitchTruncate.pm" file in the installation directory was a clever 
solution by Shoaib but I am not sure how to do that on Mac.










Thanks
Wuhib

PS: I know some users are sending amateur emails with insufficient 
information but some of us are debutant researchers/students (not 
seasoned researchers) and will learn from our mistakes. Please be kind 
and polite when suggesting the correct way to do it even though it is 
already on http://bruceravel.github.io/demeter/pods/bugs.pod.html or 
other locations. Thank you.






___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

Re: [Ifeffit] Deglitching

[Matt Newville]

Hi Bruce,

Sorry for delay, took me a while to get around to trying out the new
version.

On Tue, Sep 8, 2015 at 1:12 PM, Bruce Ravel  wrote:

> On 09/08/2015 02:02 PM, Matt Newville wrote:
>
>> Any chance of trying out the suggestions in
>> https://github.com/bruceravel/demeter/issues/24 to try to avoid PATH
>> issues, and allow Demeter to be installed in the users directory (sans
>> admin privilege)?
>>
>
> My intent was to address that with this commit:
>
>
> https://github.com/bruceravel/demeter/commit/10f9b05539bef286c21a357a0a23c0f93da37eb2
>
> although without the check for the perl executable.
>
> Do the bat files that get generated still seem wrong to you?
>
>
>
That looks much better  FWIW, I installed to C:\Demeter, not C:\Strawberry
because other tools I use (epics on windows) also often want to use
C:\Strawberry.   Anyway, with that, the top of dathena.bat reads:

@rem = '--*-Perl-*--
@echo off
SET DOTDIR="%APPDATA%\demeter"
SET DEMETER_BASE=%~dp0
SET DEMETER_BASE=%DEMETER_BASE:\perl\site\bin\=%
SET
PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;%DEMETER_BASE%\c\bin;%DEMETER_BASE%\perl\site\bin;%DEMETER_BASE%\perl\bin;%DEMETER_BASE%\c\bin\gnuplot\bin
IF NOT EXIST %DOTDIR% MD %DOTDIR%
if "%OS%" == "Windows_NT" goto WinNT
C:\Demeter\perl\bin\perl.exe -x -S "%0" %1 %2 %3 %4 %5 %6 %7 %8 %9 >
"%APPDATA%\demeter\dathena.log" 2>&1
goto endofperl
:WinNT
C:\Demeter\perl\bin\perl.exe -x -S %0 %* > "%APPDATA%\demeter\dathena.log"
2>&1
if NOT "%COMSPEC%" == "%SystemRoot%\system32\cmd.exe" goto endofperl
if %errorlevel% == 9009 echo You do not have Perl in your PATH.
if errorlevel 1 goto script_failed_so_exit_with_non_zero_val 2>nul
goto endofperl
@rem ';
#!c:\strawberry\perl\bin\perl.exe
#line 20
BEGIN {


which is much, much better.   It appears the
'#!c:\strawberry\perl\bin\perl.exe' is just ignored (athena runs and even
shows a wxt gnuplot terminal on 64-bit Windows7), but shouldn't be removed
completely.

Two suggestions:  First, if the apparently-generated-at-install time full
path for perl ("C:\Demeter\perl\bin\perl.exe" above) was replaced by
"perl.exe" (because, now you now know the path is correct), then the entire
"C:\Demeter" tree could be moved after installation, and all the batch
files (though not the shortcuts to the batch files generated at install
time) would work.

Second, if the default install location was (say) %APPDATA%\DemeterPerl
(%APPDATA%\demeter already being the DOTDIR equivalent).That would mean
the installation did not need Admin privileges.

Anyway, it's a big improvement and should avoid many of the PATH issues
we've seen recently.

Thanks,
--Matt



-- 
--Matt Newville  630-252-0431
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Bruce Ravel]

On 09/04/2015 02:54 PM, Robert Gordon wrote:


Terminal
Your value qt

Demeter.ini says wxt

I change the Set value to wxt and apply & save. message at bottom of screen
says "Now using wxt for gnuplot --> terminal and an ini file was saved"

Plucked point is now consistent.

However, when I exit and re-start Athena, back to qt and problem
re-appears.
In demeter.ini, [gnuplot] section, it still says terminal = wxt, but
under preferences,gnuplot
terminal it is back to qt.

If I change to x11, and restart, x11 is remembered.
If I change to wxt from x11, apply and save, it resets to qt when
restarting even though the ini file says wxt.


In fact, I have fixed that problem.  0.9.22 is simply broken and will 
always default to the qt terminal regardless of what you set in the 
preferences.  The cause of this was a rather silly bit of code I wrote 
when I updated to the most recent version of gnuplot in the Windows 
package.  Sorry for the confusion.


That is one of the things that is fixed in the trial package for 0.9.23 
at http://bruceravel.github.io/demeter/#windows


0.9.23 has some other changes related to the setting of environment 
variables that still merit some testing, but it will, I believe fix the 
problem that Martina originally reported and which Robert verified.


Cheers,
B


--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 535A
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Matt Newville]

Hi Bruce,

Any chance of trying out the suggestions in
https://github.com/bruceravel/demeter/issues/24 to try to avoid PATH
issues, and allow Demeter to be installed in the users directory (sans
admin privilege)?

On Tue, Sep 8, 2015 at 12:34 PM, Bruce Ravel  wrote:

> On 09/04/2015 02:54 PM, Robert Gordon wrote:
>
>>
>> Terminal
>> Your value qt
>>
>> Demeter.ini says wxt
>>
>> I change the Set value to wxt and apply & save. message at bottom of
>> screen
>> says "Now using wxt for gnuplot --> terminal and an ini file was saved"
>>
>> Plucked point is now consistent.
>>
>> However, when I exit and re-start Athena, back to qt and problem
>> re-appears.
>> In demeter.ini, [gnuplot] section, it still says terminal = wxt, but
>> under preferences,gnuplot
>> terminal it is back to qt.
>>
>> If I change to x11, and restart, x11 is remembered.
>> If I change to wxt from x11, apply and save, it resets to qt when
>> restarting even though the ini file says wxt.
>>
>
> In fact, I have fixed that problem.  0.9.22 is simply broken and will
> always default to the qt terminal regardless of what you set in the
> preferences.  The cause of this was a rather silly bit of code I wrote when
> I updated to the most recent version of gnuplot in the Windows package.
> Sorry for the confusion.
>
> That is one of the things that is fixed in the trial package for 0.9.23 at
> http://bruceravel.github.io/demeter/#windows
>
> 0.9.23 has some other changes related to the setting of environment
> variables that still merit some testing, but it will, I believe fix the
> problem that Martina originally reported and which Robert verified.
>
> Cheers,
> B
>
>
> --
>  Bruce Ravel   bra...@bnl.gov
>
>  National Institute of Standards and Technology
>  Synchrotron Science Group at NSLS-II
>  Building 535A
>  Upton NY, 11973
>
>  Homepage:http://bruceravel.github.io/home/
>  Software:https://github.com/bruceravel
>  Demeter: http://bruceravel.github.io/demeter/
> ___
> Ifeffit mailing list
> Ifeffit@millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>


--Matt
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Bruce Ravel]

On 09/08/2015 02:02 PM, Matt Newville wrote:

Any chance of trying out the suggestions in
https://github.com/bruceravel/demeter/issues/24 to try to avoid PATH
issues, and allow Demeter to be installed in the users directory (sans
admin privilege)?


My intent was to address that with this commit:

https://github.com/bruceravel/demeter/commit/10f9b05539bef286c21a357a0a23c0f93da37eb2

although without the check for the perl executable.

Do the bat files that get generated still seem wrong to you?

B


--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 535A
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Matt Newville]

Hi Martina,

On Sep 3, 2015 12:58 PM, "Martina Ralle"  wrote:

> Hi Matt,
>
>
>
> I have a quick question. When I try to deglitch in Athena it won't let me
> pick a point for deglitching. No matter where I double click it always
> chooses 8990.
>
>
>
> Have others encountered this error? I am running athena on a Windows 7 64
> bit machine. The latest (not beta) version.
>
>
>

Sorry for the trouble.   I haven't seen (or heard of) that myself, but I'll
ask the ifeffit mailing list where maybe someone has a better idea what the
trouble could be.



> -martina
>
>
>
> Martina Ralle, Ph.D.
>
> Assistant Professor
>
> Department of Molecular and Medical Genetics
>
> Mail Code  L103
>
> OHSU
>
> 3181 SW Sam Jackson Pk Rd
>
> Portland, OR 97239
>
> Phone 503 494-3225(o) 503 888-6128(m)
>
>
>
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Bruce Ravel]

On 09/04/2015 11:30 AM, Matt Newville wrote:

I have a quick question. When I try to deglitch in Athena it won't
let me pick a point for deglitching. No matter where I double click
it always chooses 8990.

__ __

Have others encountered this error? I am running athena on a Windows
7 64 bit machine. The latest (not beta) version.

__


Sorry for the trouble.   I haven't seen (or heard of) that myself, but
I'll ask the ifeffit mailing list where maybe someone has a better idea
what the trouble could be.


There were some recent issues with deglitching reported by Shoaib, but 
the fixes that went into 0.9.22 resolved all of his concerns.


I will need to be able to reproduce this on my own computer in order to 
do anything about it:

   http://bruceravel.github.io/demeter/pods/bugs.pod.html

B


--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 535A
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Bruce Ravel]

On 09/04/2015 01:37 PM, Robert Gordon wrote:


I can confirm something funny is happening here. In 0.9.21, the deglitch
menu would not display
points. I upgraded to 0.9.22 today and deglitch now displays points, but
when I choose a point
in a test data file (As2O3) and double-click, the energy point removed
is 11804.228, regardless of where
I double-click. I reverted back to 0.9.21 and with the same dataset,
this did not occur. In 0.9.21,
double-click removed the closest point to where I clicked.

I have win10pro x64 and installed the 64-bit versions of 0.9.21, .22


Can we *please* use the mailing list for these things.  It is helpful to 
the next person who runs into these issues if a discoverable record is 
left behind.


Using the preference tool, can you tell me what the value for 
gnuplot->terminal is?  If it is something other than "wxt", try changing 
it to "wxt".  The interaction with the cursor does not work correctly on 
some terminals.


If that's not the problem, then I am at a loss.  I don't see this 
behavior on any of my computers.


B



--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 535A
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Robert Gordon]

Hi Bruce,

Sorry..wrong button when replying.

Terminal
Your value qt

Demeter.ini says wxt

I change the Set value to wxt and apply & save. message at bottom of screen
says "Now using wxt for gnuplot --> terminal and an ini file was saved"

Plucked point is now consistent.

However, when I exit and re-start Athena, back to qt and problem re-appears.
In demeter.ini, [gnuplot] section, it still says terminal = wxt, but 
under preferences,gnuplot

terminal it is back to qt.

If I change to x11, and restart, x11 is remembered.
If I change to wxt from x11, apply and save, it resets to qt when 
restarting even though the ini file says wxt.


-R.


On 9/4/2015 11:06 AM, Bruce Ravel wrote:

On 09/04/2015 01:37 PM, Robert Gordon wrote:


I can confirm something funny is happening here. In 0.9.21, the deglitch
menu would not display
points. I upgraded to 0.9.22 today and deglitch now displays points, but
when I choose a point
in a test data file (As2O3) and double-click, the energy point removed
is 11804.228, regardless of where
I double-click. I reverted back to 0.9.21 and with the same dataset,
this did not occur. In 0.9.21,
double-click removed the closest point to where I clicked.

I have win10pro x64 and installed the 64-bit versions of 0.9.21, .22


Can we *please* use the mailing list for these things.  It is helpful 
to the next person who runs into these issues if a discoverable record 
is left behind.


Using the preference tool, can you tell me what the value for 
gnuplot->terminal is?  If it is something other than "wxt", try 
changing it to "wxt".  The interaction with the cursor does not work 
correctly on some terminals.


If that's not the problem, then I am at a loss.  I don't see this 
behavior on any of my computers.


B





___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

Re: [Ifeffit] Deglitching

[Bruce Ravel]

On 09/04/2015 02:54 PM, Robert Gordon wrote:

Terminal
Your value qt

Demeter.ini says wxt

I change the Set value to wxt and apply & save. message at bottom of screen
says "Now using wxt for gnuplot --> terminal and an ini file was saved"

Plucked point is now consistent.

However, when I exit and re-start Athena, back to qt and problem
re-appears.
In demeter.ini, [gnuplot] section, it still says terminal = wxt, but
under preferences,gnuplot
terminal it is back to qt.

If I change to x11, and restart, x11 is remembered.
If I change to wxt from x11, apply and save, it resets to qt when
restarting even though the ini file says wxt.


Ugh!  I thought I had fixed that problem.

Top of the to do list for Tuesday morning.

Thanks,
B


--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 535A
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit