Thank you all for the help.
Fuxiang
On Thu, Jun 23, 2016 at 10:19 PM, Matt Newville
wrote:
> Fuxiang,
>
>
> On Thu, Jun 23, 2016 at 4:47 PM, Fuxiang Zhang wrote:
>
>> Hi, Scott,
>>
>> In fact, I have a series of single crystal Ni-Fe alloys
Fuxiang,
On Thu, Jun 23, 2016 at 4:47 PM, Fuxiang Zhang wrote:
> Hi, Scott,
>
> In fact, I have a series of single crystal Ni-Fe alloys (Fm-3m) with known
> atomic ratio, and measured both Fe and Ni edges for samples and standards.
> I just want to see if there's any
You definitely will see the difference (sorry that I am replying instead of
Scott who will not mind of course) because from Ni edge the result means an
effective mixture of Ni-Ni and Ni-Fe bond lengths, and for edge - the effective
mixture of Fe-Ni and Fe-Fe bonds. That's why you get different
Hi, Scott,
In fact, I have a series of single crystal Ni-Fe alloys (Fm-3m) with known
atomic ratio, and measured both Fe and Ni edges for samples and standards.
I just want to see if there's any difference between the local bonding
environment of Fe and Ni, such as R, N and sigma2. Now using the
One additional thought:
Distinguishing Ni-Ni and Ni-Fe by creating two different feff paths and fitting
the spectrum as a mixture of the two is very difficult, to put it mildly, as
both Anatoly and Matt indicated.
But the bond length determined by your fit may be able to give you a clue,
Hi, Matt and Anayoly,
Thank you very much for the help.
Fuxiang
On Thu, Jun 23, 2016 at 1:51 PM, Anatoly I Frenkel wrote:
> Whatever you decide to do, remember that Ni Ni and Ni Fe pairs look very
> similar by EXAFS, so it does not matter how you end up doing it.
> You can as
Hi Fuxiang,
On Thu, Jun 23, 2016 at 11:38 AM, Fuxiang Zhang wrote:
> Hi, All,
> I am new in using EXAFS techniques. Just wondering how to input atomic
> structure of NiFe solid solution to Artemis. It has a simple Ni-structure,
> but both Ni and Fe occupy the same site. If I
Whatever you decide to do, remember that Ni Ni and Ni Fe pairs look very
similar by EXAFS, so it does not matter how you end up doing it.
You can as well use pure Ni but you may want to consider both fcc and bcc
structure for making the model because the alloy may end up to be either that
or