RE: [influxdb] Re: InfluxDB Raspberry Pi installation?
After you decompress the archive, what comes out? Can you copy the output of that command to this thread? Frank Inselbuch Unix Edge, Inc. Fleet Surveillance and Analytics 713-701-5421 inselb...@unixedge.com https://zoom.us/j/7137015421 -Original Message- From: influxdb@googlegroups.com [mailto:influxdb@googlegroups.com] On Behalf Of Lucia Sent: Saturday, November 25, 2017 2:17 AM To: influxdb@googlegroups.com Subject: Re: [influxdb] Re: InfluxDB Raspberry Pi installation? Thank you, Frank. Your assumptions are correct. However, if I do wget tar then I get: # service influxdb start influxdb: unrecognized service and here I am stuck. Thank you very much for your help, Lucia - Dr. Lucia Morganti @ INFN - CNAF (www.cnaf.infn.it) Address: Viale Berti Pichat 6/2, 40127 Bologna (IT) - On 24 November 2017 at 20:05, Frank Inselbuch wrote: > > Okay so first you have to get the installation kit which comes in the form of > a compressed archive, from here: > > https://portal.influxdata.com/downloads#influxdb > > I am not familiar with the board you are talking about but assuming it's an > arm processor and running a Debian-style Linux, you can try this one: > > This command will pull the kit to your machine: > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.4.2_linux_armhf > .tar.gz > > Then you decomparess the archive like this: > tar xvfz influxdb-1.4.2_linux_armhf.tar.gz > > Then you should be able to start the database: > > service influxdb start > > or > > systemctl start influxdb > > > > > > Frank Inselbuch > Unix Edge, Inc. > Fleet Surveillance and Analytics > 713-701-5421 > inselb...@unixedge.com > https://zoom.us/j/7137015421 > > -Original Message- > From: influxdb@googlegroups.com [mailto:influxdb@googlegroups.com] On > Behalf Of lucia.morga...@gmail.com > Sent: Friday, November 24, 2017 9:15 AM > To: InfluxData > Subject: [influxdb] Re: InfluxDB Raspberry Pi installation? > > Hi Frank, > what do you mean when you say "after you tar you install it with dpkg"? > I'm working on ARM, Invidia X1 board. > Thanks, > lucia > > On Thursday, October 13, 2016 at 11:56:15 PM UTC+2, Frank Inselbuch wrote: >> After you tar you will install it with dpkg. >> It will probably get started automatically at that point. >> But if you want to start it/restart/stop just >> >> >> sudo service influxd start (or restart or stop) >> >> >> by default I believe the server will be available for http: requests >> on port 8086 >> >> >> i would encourage you to also install something like grafana to pull >> data from influxdb, but you can roll your own with http requests >> >> >> to work with the database interactively, use the CLI (command line >> interface) >> >> >> just type >> >> >> $ influx >> >> >> here's a few commands to get you started >> >> >> >> >> Influx> create database test1 >> Influx> insert cars,vin=3948579834 year=2015,color='Green',mileage=15 >> Influx> select * from cars >> >> >> Good luck. >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Thursday, October 13, 2016 at 7:39:27 AM UTC-5, EBRAddict wrote: >> Hi, >> >> >> I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. >> Currently it's logging ~50 data points every 200ms to a USB flash drive text >> file but I want to ramp that up to 200 every 10ms, or however fast I can >> push data from the microcontrollers to the Pi. >> >> >> I downloaded and uncompressed the ARM binaries using the instructions on the >> InfluxDB download page: >> >> >> wget >> https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armh >> f .tar.gz tar xvfz influxdb-1.0.2_linux_armhf.tar.gz >> >> >> What are the next steps? I'm not a Linux guy but I can follow directions if >> someone could point me to them. I'd like to configure the service(s) to run >> at startup automatically and be accessible for querying by any logged in >> user (it's a closed system). >> >> >> Thanks. > > -- > Remember to include the version number! > --- > You received this message because you are subscribed to a topic in the Google > Groups "InfluxData" group. > To unsubscribe from this topic, vi
Re: [influxdb] Re: InfluxDB Raspberry Pi installation?
Thank you, Frank. Your assumptions are correct. However, if I do wget tar then I get: # service influxdb start influxdb: unrecognized service and here I am stuck. Thank you very much for your help, Lucia - Dr. Lucia Morganti @ INFN - CNAF (www.cnaf.infn.it) Address: Viale Berti Pichat 6/2, 40127 Bologna (IT) - On 24 November 2017 at 20:05, Frank Inselbuch wrote: > > Okay so first you have to get the installation kit which comes in the form of > a compressed archive, from here: > > https://portal.influxdata.com/downloads#influxdb > > I am not familiar with the board you are talking about but assuming it's an > arm processor and running a Debian-style Linux, you can try this one: > > This command will pull the kit to your machine: > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.4.2_linux_armhf.tar.gz > > Then you decomparess the archive like this: > tar xvfz influxdb-1.4.2_linux_armhf.tar.gz > > Then you should be able to start the database: > > service influxdb start > > or > > systemctl start influxdb > > > > > > Frank Inselbuch > Unix Edge, Inc. > Fleet Surveillance and Analytics > 713-701-5421 > inselb...@unixedge.com > https://zoom.us/j/7137015421 > > -Original Message- > From: influxdb@googlegroups.com [mailto:influxdb@googlegroups.com] On Behalf > Of lucia.morga...@gmail.com > Sent: Friday, November 24, 2017 9:15 AM > To: InfluxData > Subject: [influxdb] Re: InfluxDB Raspberry Pi installation? > > Hi Frank, > what do you mean when you say "after you tar you install it with dpkg"? > I'm working on ARM, Invidia X1 board. > Thanks, > lucia > > On Thursday, October 13, 2016 at 11:56:15 PM UTC+2, Frank Inselbuch wrote: >> After you tar you will install it with dpkg. >> It will probably get started automatically at that point. >> But if you want to start it/restart/stop just >> >> >> sudo service influxd start (or restart or stop) >> >> >> by default I believe the server will be available for http: requests >> on port 8086 >> >> >> i would encourage you to also install something like grafana to pull >> data from influxdb, but you can roll your own with http requests >> >> >> to work with the database interactively, use the CLI (command line >> interface) >> >> >> just type >> >> >> $ influx >> >> >> here's a few commands to get you started >> >> >> >> >> Influx> create database test1 >> Influx> insert cars,vin=3948579834 year=2015,color='Green',mileage=15 >> Influx> select * from cars >> >> >> Good luck. >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Thursday, October 13, 2016 at 7:39:27 AM UTC-5, EBRAddict wrote: >> Hi, >> >> >> I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. >> Currently it's logging ~50 data points every 200ms to a USB flash drive text >> file but I want to ramp that up to 200 every 10ms, or however fast I can >> push data from the microcontrollers to the Pi. >> >> >> I downloaded and uncompressed the ARM binaries using the instructions on the >> InfluxDB download page: >> >> >> wget >> https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf >> .tar.gz tar xvfz influxdb-1.0.2_linux_armhf.tar.gz >> >> >> What are the next steps? I'm not a Linux guy but I can follow directions if >> someone could point me to them. I'd like to configure the service(s) to run >> at startup automatically and be accessible for querying by any logged in >> user (it's a closed system). >> >> >> Thanks. > > -- > Remember to include the version number! > --- > You received this message because you are subscribed to a topic in the Google > Groups "InfluxData" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/influxdb/us4x3V2fbNk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > influxdb+unsubscr...@googlegroups.com. > To post to this group, send email to influxdb@googlegroups.com. > Visit this group at https://groups.google.com/group/influxdb. > To view this discussion on the web visit > https://groups.google.com/d/msgid/influxdb/d55e0819-a907-4733-9a2f-5d572686e435%40googlegroups.com. > For
RE: [influxdb] Re: InfluxDB Raspberry Pi installation?
Okay so first you have to get the installation kit which comes in the form of a compressed archive, from here: https://portal.influxdata.com/downloads#influxdb I am not familiar with the board you are talking about but assuming it's an arm processor and running a Debian-style Linux, you can try this one: This command will pull the kit to your machine: wget https://dl.influxdata.com/influxdb/releases/influxdb-1.4.2_linux_armhf.tar.gz Then you decomparess the archive like this: tar xvfz influxdb-1.4.2_linux_armhf.tar.gz Then you should be able to start the database: service influxdb start or systemctl start influxdb Frank Inselbuch Unix Edge, Inc. Fleet Surveillance and Analytics 713-701-5421 inselb...@unixedge.com https://zoom.us/j/7137015421 -Original Message- From: influxdb@googlegroups.com [mailto:influxdb@googlegroups.com] On Behalf Of lucia.morga...@gmail.com Sent: Friday, November 24, 2017 9:15 AM To: InfluxData Subject: [influxdb] Re: InfluxDB Raspberry Pi installation? Hi Frank, what do you mean when you say "after you tar you install it with dpkg"? I'm working on ARM, Invidia X1 board. Thanks, lucia On Thursday, October 13, 2016 at 11:56:15 PM UTC+2, Frank Inselbuch wrote: > After you tar you will install it with dpkg. > It will probably get started automatically at that point. > But if you want to start it/restart/stop just > > > sudo service influxd start (or restart or stop) > > > by default I believe the server will be available for http: requests > on port 8086 > > > i would encourage you to also install something like grafana to pull > data from influxdb, but you can roll your own with http requests > > > to work with the database interactively, use the CLI (command line > interface) > > > just type > > > $ influx > > > here's a few commands to get you started > > > > > Influx> create database test1 > Influx> insert cars,vin=3948579834 year=2015,color='Green',mileage=15 > Influx> select * from cars > > > Good luck. > > > > > > > > > > > > > > On Thursday, October 13, 2016 at 7:39:27 AM UTC-5, EBRAddict wrote: > Hi, > > > I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. > Currently it's logging ~50 data points every 200ms to a USB flash drive text > file but I want to ramp that up to 200 every 10ms, or however fast I can push > data from the microcontrollers to the Pi. > > > I downloaded and uncompressed the ARM binaries using the instructions on the > InfluxDB download page: > > > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf > .tar.gz tar xvfz influxdb-1.0.2_linux_armhf.tar.gz > > > What are the next steps? I'm not a Linux guy but I can follow directions if > someone could point me to them. I'd like to configure the service(s) to run > at startup automatically and be accessible for querying by any logged in user > (it's a closed system). > > > Thanks. -- Remember to include the version number! --- You received this message because you are subscribed to a topic in the Google Groups "InfluxData" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/influxdb/us4x3V2fbNk/unsubscribe. To unsubscribe from this group and all its topics, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/d55e0819-a907-4733-9a2f-5d572686e435%40googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/SN1PR16MB06850CC2C148E380990CC702DD260%40SN1PR16MB0685.namprd16.prod.outlook.com. For more options, visit https://groups.google.com/d/optout.
[influxdb] Re: InfluxDB Raspberry Pi installation?
Hi Frank, what do you mean when you say "after you tar you install it with dpkg"? I'm working on ARM, Invidia X1 board. Thanks, lucia On Thursday, October 13, 2016 at 11:56:15 PM UTC+2, Frank Inselbuch wrote: > After you tar you will install it with dpkg. > It will probably get started automatically at that point. > But if you want to start it/restart/stop just > > > sudo service influxd start (or restart or stop) > > > by default I believe the server will be available for http: requests on port > 8086 > > > i would encourage you to also install something like grafana to pull data > from influxdb, but you can roll your own with http requests > > > to work with the database interactively, use the CLI (command line interface) > > > just type > > > $ influx > > > here's a few commands to get you started > > > > > Influx> create database test1 > Influx> insert cars,vin=3948579834 year=2015,color='Green',mileage=15 > Influx> select * from cars > > > Good luck. > > > > > > > > > > > > > > On Thursday, October 13, 2016 at 7:39:27 AM UTC-5, EBRAddict wrote: > Hi, > > > I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. > Currently it's logging ~50 data points every 200ms to a USB flash drive text > file but I want to ramp that up to 200 every 10ms, or however fast I can push > data from the microcontrollers to the Pi. > > > I downloaded and uncompressed the ARM binaries using the instructions on the > InfluxDB download page: > > > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf.tar.gz > tar xvfz influxdb-1.0.2_linux_armhf.tar.gz > > > What are the next steps? I'm not a Linux guy but I can follow directions if > someone could point me to them. I'd like to configure the service(s) to run > at startup automatically and be accessible for querying by any logged in user > (it's a closed system). > > > Thanks. -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/d55e0819-a907-4733-9a2f-5d572686e435%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [influxdb] Re: InfluxDB Raspberry Pi installation?
You can find the v1.2.0 Debian package compatible with ARM-based distributions here: https://dl.influxdata.com/influxdb/releases/influxdb_1.2.0_armhf.deb On Wed, Feb 15, 2017 at 2:45 PM, wrote: > > I want to install version 1.2. How can i do it? > > -- > Remember to include the version number! > --- > You received this message because you are subscribed to the Google Groups > "InfluxData" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to influxdb+unsubscr...@googlegroups.com. > To post to this group, send email to influxdb@googlegroups.com. > Visit this group at https://groups.google.com/group/influxdb. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/influxdb/0aa56979-6d6e-4956-997c-56ed3c35208f%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/CAD8sRLAKxbuzu9yEc-85nmJyRJWjq6NNWD6RvrmQjJ3pRY0_VA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
[influxdb] Re: InfluxDB Raspberry Pi installation?
I want to install version 1.2. How can i do it? -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/0aa56979-6d6e-4956-997c-56ed3c35208f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[influxdb] Re: InfluxDB Raspberry Pi installation?
For anyone coming across this thread, I found the apt-get install method stopped working when I tried on a fresh Raspbian install, it couldn't find the library. I'm a Linux newbie so perhaps I'm missing something obvious. I did get this to work: --Update your Pi, this may take a while... sudo apt-get update sudo apt-get upgrade -- get the Debian package from here. Note the file name and subdirectory structure may change so you might have to search for it. wget https: //repos.influxdata.com/debian/pool/stable/i/influxdb/influxdb_1.0.2-1_armhf.deb -- install the Debian package sudo dpkg -i influxdb_1.0.2-1_armhf.deb -- start the service sudo service influxd start -- run the CLI influx On Thursday, October 13, 2016 at 8:39:27 AM UTC-4, EBRAddict wrote: > > Hi, > > I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. > Currently it's logging ~50 data points every 200ms to a USB flash drive > text file but I want to ramp that up to 200 every 10ms, or however fast I > can push data from the microcontrollers to the Pi. > > I downloaded and uncompressed the ARM binaries using the instructions on > the InfluxDB download page: > > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf.tar.gz > tar xvfz influxdb-1.0.2_linux_armhf.tar.gz > > > What are the next steps? I'm not a Linux guy but I can follow directions > if someone could point me to them. I'd like to configure the service(s) to > run at startup automatically and be accessible for querying by any logged > in user (it's a closed system). > > Thanks. > -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/a20a3416-6ec7-4347-a5aa-940d22535b22%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[influxdb] Re: InfluxDB Raspberry Pi installation?
After you tar you will install it with dpkg. It will probably get started automatically at that point. But if you want to start it/restart/stop just sudo service influxd start (or restart or stop) by default I believe the server will be available for http: requests on port 8086 i would encourage you to also install something like grafana to pull data from influxdb, but you can roll your own with http requests to work with the database interactively, use the CLI (command line interface) just type $ influx here's a few commands to get you started Influx> create database test1 Influx> insert cars,vin=3948579834 year=2015,color='Green',mileage=15 Influx> select * from cars Good luck. On Thursday, October 13, 2016 at 7:39:27 AM UTC-5, EBRAddict wrote: > > Hi, > > I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. > Currently it's logging ~50 data points every 200ms to a USB flash drive > text file but I want to ramp that up to 200 every 10ms, or however fast I > can push data from the microcontrollers to the Pi. > > I downloaded and uncompressed the ARM binaries using the instructions on > the InfluxDB download page: > > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf.tar.gz > tar xvfz influxdb-1.0.2_linux_armhf.tar.gz > > > What are the next steps? I'm not a Linux guy but I can follow directions > if someone could point me to them. I'd like to configure the service(s) to > run at startup automatically and be accessible for querying by any logged > in user (it's a closed system). > > Thanks. > -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/6b289b57-fbc7-41e7-b33a-e4ac69d29b2f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[influxdb] Re: InfluxDB Raspberry Pi installation?
That worked! Thank you. -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/22aa0854-be61-4b5e-8752-ac8b05ade59e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[influxdb] Re: InfluxDB Raspberry Pi installation?
I'm on a raspi 2, but adding "deb https://repos.influxdata.com/ubuntu jessie stable" to /etc/apt/sources.list let me install influx/telegraf via apt. On Thursday, October 13, 2016 at 8:39:27 AM UTC-4, EBRAddict wrote: > > Hi, > > I'd like to try InfluxDB on a Raspberry Pi 3 for a mobile sensor project. > Currently it's logging ~50 data points every 200ms to a USB flash drive > text file but I want to ramp that up to 200 every 10ms, or however fast I > can push data from the microcontrollers to the Pi. > > I downloaded and uncompressed the ARM binaries using the instructions on > the InfluxDB download page: > > wget > https://dl.influxdata.com/influxdb/releases/influxdb-1.0.2_linux_armhf.tar.gz > tar xvfz influxdb-1.0.2_linux_armhf.tar.gz > > > What are the next steps? I'm not a Linux guy but I can follow directions > if someone could point me to them. I'd like to configure the service(s) to > run at startup automatically and be accessible for querying by any logged > in user (it's a closed system). > > Thanks. > -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to influxdb+unsubscr...@googlegroups.com. To post to this group, send email to influxdb@googlegroups.com. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/5f396ec0-65a0-4504-8168-5534016d37b5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.