Hi,
I don't know of an Opteron series, but there are newer versions of
Cyrus which have fixed some bugs on x86_64.
I think the problem is that ld can't find the ssl library.
You should check the library Path and add the path where your ssl library is.
Regards
Michael Meng
Hi,
If you use unixhierarchysep: 0 in you /etc/imapd.conf (which is default)
the . is used as hierarchyseperator.
So in your case user.peter.testaccount would be the Folder testaccount
of the user peter.
There are two way use ^ to replace .
cm user.peter^testaccount
Or use unixhierarchysep:
Hi,
Cyrus keeps the \Seen status for each user that has read acces to a Mailbox.
So the user to login anf change the \Seen flag has to be the same as
the one who checking the status afterwards.
In 2.3.10 there is a shared seen status which might be usefull.
Quoting Mike Eggleston <[EMAIL PRO
Hi,
i don't know if it's possible with Cyrus 2.2, but it is with 2.3,
look for unified murder
Quoting Ingo Steuwer <[EMAIL PROTECTED]>:
> Hi
>
> I'm evaluating cyrus-murder with cyrus 2.2 (sources from debian etch) using
> the documentation from http://cyrusimap.web.cmu.edu/imapd/install-murder.
Hi,
you have to give your admin the delete permission "c" for the Folder.
Quoting Daniel Aquino <[EMAIL PROTECTED]>:
On Jan 14, 2008 3:44 AM, Daniel Aquino <[EMAIL PROTECTED]> wrote:
After creating a mail box such as [EMAIL PROTECTED]
I end up with user.test created.
Then when I try to dele
Hi,
I found some segmentation faults of my "imapd -s" and "pop3d -s""proceses
in my logs.Has anybody seen this before. I'm running cyrus 2.3.8 on an
SLES10 x86_64.
Jan 14 09:37:44 mailserv08 kernel: imapd[1898]: segfault at
2b9042669978 rip
004805d4 rsp 7fffdf6b51c0 error 4
J
Quoting Bron Gondwana <[EMAIL PROTECTED]>:
On Tue, Jan 15, 2008 at 09:18:27AM +0100, Michael Menge wrote:
Hi,
I found some segmentation faults of my "imapd -s" and "pop3d -s""proceses
in my logs.Has anybody seen this before. I'm running cyrus 2.3.8 o
multiple
times depending on the retries of lmtpd.
is this a (known) bug? Are there other cyrus tools which will have the
same effect? unexpunge -l ?
I use Cyrus 2.3.8 on a x86_64 SLES 10
Regards
Michael Menge
Quoting David Carter <[EMAIL PROTECTED]>:
On Mon, 21 Jan 2008, Michael Menge wrote:
i used mbexamine user/testuser | less
to check the check the mailbox of testuser. I forgot to quit less over
the weekend and today i discoverd two problems.
1. The mailbox was blocked. No new mail
hits
a keep, fileinto or implicite keep action or to accept the email if it
hits a forward or discarde action and to ignore the keep and fileinto
actions in case of overquota?
regards
Michael Menge
M.
Quoting Alain Spineux <[EMAIL PROTECTED]>:
On Jan 29, 2008 9:06 AM, Michael Menge
<[EMAIL PROTECTED]> wrote:
Is there a way to only send the over quota bounces if the message hits
a keep, fileinto or implicite keep action or to accept the email if it
hits a forward or discarde a
Hi,
i think the problem is that folders under user can only be created on
the backands, as the frontend has noway to know on which backend the
new folder
should be created. Other folders like user.testuser.test or a rename
will use the parent/old backend and partition.
Quoting Alexey Lo
Hi,
I had a look at rfc2033. It is possible to send an individual returncode
after the DATA stage for each recipient.
So befor I try to patch the lmtpd, i would like to discus, which is
the desired/expected behavior. To make discussion easier lets think about
common usecases.
1. discard:
Hi,
the IMAP Protocoll uses a special encoding based on UTF-7 to encode non-ASCII
charackters. & is used to mark the beginning of such an encoding. &
itself is encoded as &- . There are also other ASCII charackters which
are not allowed.
The allowed charackters are defiend in mboxname.c "#define
Hi,
i think you have another problem, & has to be encoded in imap as &- .
The encoding is done by the mailclient. But on the other hand cyrus
expacts the user
to have a folder under user that matches the username used for authentication.
IMHO using & in username is a bad idea as the authenti
eir is 2 different list of allowed characters!
For example, cyradm allow you to create some root mailbox (like
user/test&[EMAIL PROTECTED])
but dont allow you to manage it !
Try this
sam user/test&[EMAIL PROTECTED] anyone p
you will get an error !
-Messaggio originale-
Da: Tos
Hi,
Set "maxmessagesize" in imapd.conf
Quoting Nikos Gatsis <[EMAIL PROTECTED]>:
Hello list.
Is it possible with cyrus to reject emails with large attachments and
inform the sender for the rejection?
Thank you
Nikos
Cyrus Home Page: http://cyrusimap.web.cmu.edu/
Cyrus Wiki/FAQ: http://cy
Hi,
Is "allowusermoves: 1" in imapd.conf?
Quoting Alexey Lobanov <[EMAIL PROTECTED]>:
Hello all.
A simple stupid question.
Does anyone know if Cyrus 2.3 *really* can move mailboxes from one
server to another in accordance with "install-murder.html" manual?
pharmacy.rct-int> rename user.tes
Hi,
we had similar problems importing e-mails via IMAP from an old UW-IMAP System.
We found that the "to: undisclosed recipients" was not the problem,
but lines beginnig with ">From " or Headerlines with an linbreake.
We removed/repaired the corroup heades in the old Mailboxes
Telemitrie logging
Hi,
Quoting Paul van der Vlis <[EMAIL PROTECTED]>:
Hello,
I would like to rename a mailbox, but it does not work:
localhost> sam user.maxima cyrus lrswipcda
localhost> rename user.maxima user.maxima2
renamemailbox: Operation is not supported on mailbox
Is "allowusermoves: 1" in imapd.conf?
Hi,
the default value of allowplaintext changed. Use ssl/tls or set
allowplaintext: 1 in imapd.conf
Quoting Forrest Aldrich <[EMAIL PROTECTED]>:
I'm having a problem with authentication. I can get/read/send mail fine
through Cyrus, Sendmail. But when I try to authenticate to sieve, it's
fail
Quoting Nikos Gatsis <[EMAIL PROTECTED]>:
> Andrzej Adam Filip wrote:
>> Joseph Brennan <[EMAIL PROTECTED]> wrote:
>>
>>
>>> --On Thursday, April 3, 2008 17:26 +0300 Nikos Gatsis
>>> <[EMAIL PROTECTED]> wrote:
>>>
>>>
I'm facing a strange problem.
Every message I receive with Greek ch
Hi,
IMHO Cyradm does not support SSL, so to run Cyradm there has to run an IMAP
server. You can limit this IMAP server to the interface 127.0.0.1 so
it can only be reached from localhost.
It may be possible to run cyradm trough an openssl tunnel to connect to
IMAPS.
It would help to know why you
Hi,
IMAP stores emails, to store a file it has to be encapsulated
in an email as attachment.
Most mailclients allow to save drafts. These drafts are regular messages
which have not been send but been inserted via the IMAP protocoll.
Regards
Michael Menge
Quoting Test <[EMAIL PROTEC
### Making all in /zdv-system/cyrus-imapd-2.3.12/perl/imap
Checking if your kit is complete...
Looks good
Writing Makefile for Cyrus::IMAP
make[2]: Entering directory `/zdv-system/cyrus-imapd-2.3.12/perl/imap'
cp IMAP/Admin.pm blib/lib/Cyrus/IMAP/Admin.pm
cp IMAP.pm blib/lib/Cyrus/IMAP.pm
cp IMA
lem with the config.sub a year ago.
http://readlist.com/lists/lists.andrew.cmu.edu/info-cyrus/0/4957.html
Do you have to replace the config.sub or does your configure find the
config.sub in the system?
Regards
Michael Menge
Simon
Regards
Michael
IMAP.c:673: warning: unused
Quoting Shelley Waltz <[EMAIL PROTECTED]>:
> A bit of confusion over moving my users' sieve scripts to the new server.
>
> Old server, 2.2.3 duplicate_db=berkeley
> New server, 2.3.7 duplicate_db=skiplist
>
> Documentation indicates the duplicate_db determines both duplicate
> delivery db as wel
Hi,
as every MTA-Software uses other Templates for these kind of bounces, there
is not "one" header you can use for this kind of filtering.
We use the vbounce rule from spamassassin, which adds *BOUNCE_MESSAGE
entries to the header X-Spam-Status to filter these kind of backscatter.
http://wiki.a
Quoting Maurizio Lo Bosco <[EMAIL PROTECTED]>:
>> I wanted to know if we can restrict some users to access POP and allow some
>> users to access POP. I do not want to have firewall based restriction. I
>> am using cyrus-imapd-2.3.7-4. The same users should be allowed through
>> Webmail without an
Hi
do you use SSL/TLS for Sieve/IMSP?
In 2.3.9 the dafaultvalue for allowplaintext changed to 0
Quoting Martin Ziegler <[EMAIL PROTECTED]>:
Just recognized that authenticating to SIEVE is also no longer working.
SASLAUTHd is returning a successfull authentication but SIEVE says:
sievelocal
Hi Stephen,
Quoting Stephen Liu <[EMAIL PROTECTED]>:
> $ cyradm -u cyrus localhost
> Password:
> localhost> cm user.satimiscyrus
> localhost> quit
>
> it works. But I can't find this new user NOR its mailbox.
$ locate satimiscyrus
/var/spool/cyrus/mail/u/user^satimiscyrus
/var/spool/cyrus/
Quoting Stephen Liu <[EMAIL PROTECTED]>:
$ cat /etc/imapd.conf | grep unixhierarchysep
unixhierarchysep: yes
It is set as "yes"
yes and 1 mean the same, unixhierarchsep is used.
To create a Inbox for the user satimiscyrus you have to use
cm user/satimiscyrus
The ^ is the reperentatio
Quoting Stephen Liu <[EMAIL PROTECTED]>:
$ tail /var/log/mail.info
Jun 9 21:26:25 lampserver postfix/qmgr[4188]: C18198781EC:
from=<[EMAIL PROTECTED]>, s
ize=1834, nrcpt=1 (queue active)
Jun 9 21:26:25 lampserver postfix/lmtp[4196]: C18198781EC:
to=<[EMAIL PROTECTED]>,
relay=none, dela
$ imtest -m login -p imap -u satimiscyrus localhost
S: * OK lampserver Cyrus IMAP4 v2.2.12-Debian-2.2.12-4ubuntu1 server
ready
C: C01 CAPABILITY
S: * CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ MAILBOX-REFERRALS
NAMESPACE UIDPLUS ID NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND
BINARY SORT THRE
Hi,
sasl does not pass the IP-Address to pam.
Quoting Ashay Chitnis <[EMAIL PROTECTED]>:
> Dear All,
>
> I need to access pop and imap on user based IP level restrictions. I found
> pam to be best suited for this service level restriction. The restriction
> will be as below.
>
> User pqr shou
Hi,
try quota -f
Regards
Michael
Quoting Philip Murray <[EMAIL PROTECTED]>:
Hi,
I'm trying to enable quotas on various mailboxes, but have hit a
problem. Quota reports ridiculous usage numbers for various mailboxes
(which bare no resemblence to actual disk usage at all, I wish I di
Hi,
in Cyrus 2.3.9 there was the following change:
* Changed the default value of the allowplaintext option to disabled (0).
You can use allowplaintext: 1 or sieve_allowplaintext: 1
to allow plaintextlogin for all or only for sieve
Regards
Michael Menge
Quoting dick hoogendijk <[EM
quot;membership" as admin and allow the user to put mails
in the Folder. You should remove the writepermission after migration
Regards
Michael Menge
Quoting brian <[EMAIL PROTECTED]>:
> I'm moving some accounts to a new server using imapsync and have just
&
Quoting Jorey Bump <[EMAIL PROTECTED]>:
> Steve Webb wrote, at 07/21/2008 04:35 PM:
>
>> 1.) If a pop user selects "keep messages on server" they start to see
>> duplicate emails. I saw that other people on the listserv have also had
>> the same issues, but there's not been any resolution to thi
Hi,
Quoting Mathieu Kretchner <[EMAIL PROTECTED]>:
> Wesley Craig a écrit :
>> On 11 Aug 2008, at 08:57, Mathieu Kretchner wrote:
what is in use now ?
>>> Cyrus
>>>
>>> Why should I choose Cyrus instead of dovecot ?
>>
>> Are you having a problem with Cyrus? Migrating from any server to
Hi,
I tried this some thime ago with pam, but without a success.
SASL does not pass the ip-addres to PAM so you can't use pam_access,
nor can you change/configure the PAM service name to run an other
instance of cyrus using an other pam configuration.
You may have success by running too inst
gging for that user. Create a directory with the name of the userid
in {configdirectory}/log . Cyrus will create files in there wich will
contain all data send and recieved after authentication.
Michael Menge
-
Quoting Denis BUCHER <[EMAIL PROTECTED]>:
> Michael Menge a écrit :
>> Quoting Denis BUCHER <[EMAIL PROTECTED]>:
>>>
>>> We have 50 people using Outlook on our IMAP cyrus server. It's
>>> wonderful : fast, efficient, no problem, easy...
>
x27; character in Cyrus folders names?
The ' is not in the set of allowed characters, which is defined as
GOODCHARS in imap/mboxname.c
But I don't know if adding it to GOODCHARS will bring other problems.
Regards
Michael Menge
---
Hi
Quoting David Newman <[EMAIL PROTECTED]>:
> cyrus-imapd-2.3.12p2, FreeBSD 7.0 64-bit, Opteron CPUs
>
> When building from source, running configure produces this error:
>
> checking build system type... Invalid configuration
> `amd64-unknown-freebsd7.0': machine `amd64-unknown' not recognize
Hi,
if only the seenstate is the problem you may try to set the optinon
flushseenstate: 1 in imapd.conf
Regards
Michael Menge
Quoting "Ciprian Marius Vizitiu (GBIF)" <[EMAIL PROTECTED]>:
Hi everybody,
I'm trying to migrate a small 120GB IMAP store from a 32 bit
Hi,
Quoting Mathieu Kretchner :
> Ok thank you for your help,
>
> I've tried the allowplaintext: yes but the proxy sieve server I use is
> still complaining !
>
> I don't know why? I've done a tcp/ip trace of data transmission between
> proxy and sieve cyrus server and the only thing I see is tha
Quoting Mathieu Kretchner :
It seems like I've no plain text auth capability !!
Depending on you distribution plain authentication may be in a seperat
package you have to install.
M.Menge
fig
file. I would make the error spit out:
Is there a way to know if cyrus was updated?
Regards
Michael Menge
M.MengeTel.: (49) 7071/29-70316
Universität Tübingen
Quoting Adam Tauno Williams :
On Tue, 2009-03-10 at 12:07 +0100, Michael Menge wrote:
Quoting Bron Gondwana :
> Is there any good reason for a site to continue running 2.2 or even 2.1?
Some Enterprise Distibutions still use 2.2.x as they maintain the
same version for a very long time.
consitent with the horde database.
Regards
Michael Menge
M.MengeTel.: (49) 7071/29-70316
Universität Tübingen Fax.: (49) 7071/29-5912
Zentrum für Datenve
Quoting Eric Luyten :
A couple weeks ago, in order to accommodate local users (not) receiving
mail messages written by some Outlook/Exchange correspondants (Message-Id
gets re-used...) I disabled Cyrus duplicate suppression by adding the
following line to my imapd.conf :
duplicatesuppression
Hi,
Quoting Gabriele Bulfon :
Hello,
I'm having trouble with some filters that match a sentence with spaces.
Is there a special way I should specify spaces in a rule?
This is the rule that is not considered at all:
...
elsif allof (address :contains ["from"] "Mall LM Giver") {
fileinto
- ITALY
http://www.sonicle.com
------
Da: Michael Menge
A: info-cyrus@lists.andrew.cmu.edu
Data: 26 maggio 2009 11.30.27 CEST
Oggetto: Re: Sieve filter with spaces
Hi,
Quoting Gabriele Bulfon :
Hello,
I'm having trouble with some filters that match a sentence with spaces.
Is there a spe
Hi,
Quoting Paolo Cravero :
Hi.
I have a setup with 1 frontend, 1 murder, 2 backends. I am playing with
cross-backend mailbox sharing, one of the features we value most.
Problem. While I can access shared mailboxes that reside on the same backend
just fine, with Thunderbird (1.5/linux) I can s
Hi,
Quoting Marc Patermann :
Hi,
Marc Patermann schrieb:
I'm a bit stuck. I want to migrate from 2.2.12 to a recent 2.3.x server.
Does no one use 2.3 with ldap and can point in the right direction?
We use Cyrus 2.3 with pam mand pam_ldap, if you don't need
support for group permissions,
Quoting Christophe Boyanique :
Hello,
I've got a problem with an old Cyrus installation: it is a 2.2.12
version on RedHat AS3 server which used to work correctly. It seems that
after a power failure, some mailboxes have been corrupted.
On 1000 mailboxes, 5 seem to be unreachable (for imap rea
Quoting Martin Schweizer :
Hello Pascal
2009/7/9 Pascal Gienger :
Martin Schweizer schrieb:
a) Is SSL enabled? Did you try a connect via imaps or imap/starttls?
Since I do not need imaps so I did not activated this option.
b) what's in the log after this connect?
c) is the tls_session.
Hi,
Quoting Nybbles2Byte :
From the detailed debug log from Postfix it seems to me that Cyrus
is rejecting the email but
all the detail in the log suggests that Postfix is passing Cyrus the
correct information. Being
a newbie on Linux and all the components in this setup I could very
well
Quoting Gavin Gray :
Assuming we do do the migration first, how would you suggest we
subsequently enable replication? Can we just start the sync_client
doing rolling replication, or should we do an initial replication of
all users by running sync_client manually with a list of users?
Hi,
Y
Hi,
did you reload/restart syslogd?
Quoting zhuzhixin :
Hi,
*** http://cyrusimap.web.cmu.edu/imapd/install-configure.html***
In the page above, it tell us howto make seperate message for
cyrus-imapd log. I follow the page and add two lines in /etc/syslog.conf
local6.debug
Quoting Adam Tauno Williams :
> On Mon, 2009-08-31 at 16:51 +0200, Paolo Cravero wrote:
>> andreas.moro...@sb-brixen.it wrote:
>> > Is it possible to configure cyrus the way that it compresses the
>> > attachments on the storage ( not for tranfer as in RFC 4978 ) ? I know
>> AFAIK there is no cyru
Quoting LALOT Dominique :
Hello,
Sometimes, I have some bad quotas. Here is a trace:
[cy...@imap-perso ~]$ cyradm -user cyrus localhost
Password:
localhost.localdomain> lq user/xx
STORAGE 197/100 (0.0197%)
[r...@imap-perso ~]# du -hs /var/spool/imap2/m/user/xx
890M/var/spool/imap2/m/
Quoting Eli Ben-Shoshan :
> We are now in the planning phase of moving to the cyrus v2.3 branch.
> We will be
> installing all v.2.3.7 nodes since that is what is the latest
> available in RHEL 5.3.
I don't know which patches where backported to v.2.3.7 in RHEL 5.3
but there where many bugs i
Hi,
Quoting mail_l...@computer-gott.de:
Hi all !
on my installation , there's a problem with timsieved and horde-app "INGO".
i don´t know if cyrus or horde causses this problem, so there ist
also an similiar thread on lists.horde.org
I am using Cyrus-imapd with webcyradm, mysql, amavisd, sp
Hi,
Quoting Bernd Petrovitsch :
Hi all!
We are running cyrus-imapd with all files (mailboxes, Berkeley-DB,
mmap()ed files) on an ext3 filesystem (with data=ordered) on a iSCSI
block device (and the actual storage is on a NetApp box if that matters)
on a Xeon 3.2GHz CPU (with 4 cores/2 HT threa
Quoting Georg Stich :
Hi!
Thank you.
I added the lines to my Sieve.php (/usr/share/pear/Net/Sieve.php)
Now ingo freezes.
No information in the logs.
We use Net_Sieve 1.1.6 with the Patch form the
Horde Bug-Tracker and Ingo 1.2.1
Does the logfiles indecate that the ingo session was auth
Quoting Bernd Petrovitsch :
On Tue, 2009-09-08 at 16:56 +0200, Michael Menge wrote:
[...]
Quoting Bernd Petrovitsch :
[...]
> We are running cyrus-imapd with all files (mailboxes, Berkeley-DB,
> mmap()ed files) on an ext3 filesystem (with data=ordered) on a iSCSI
> block device
Regards
Michael Menge
M.MengeTel.: (49) 7071/29-70316
Universität Tübingen Fax.: (49) 7071/29-5912
Zentrum für Datenverarbeitung mail:
michael.me...@zdv.uni-tu
Quoting Oleg Gorokhov :
Michael,
it could be useful some observations and details in my situation
after update cyrus from 2.3.14 -> 2.3.15 murder+sync_server
combination (actually with our patches applied). Our problem with
segfaults syncserver that in imapd.conf the default-partition s
Quoting mozafar roshany :
Hi everyone.
I want to use the Cyrus LMTP server to get mail from Postfix remotely. But,
the problem is that I can't use Cyrus-IMAP/POP itself for some reasons and I
have courier as my IMAP/POP server which uses Maildir++ mailbox format. Is
there any way (any configura
Quoting Tim Champ :
Hello all.
We've setup a new cyrus backend server with 2.3.15. (as a part of our
cyrus mail setup here) Our current version is a patched up 2.3.8. When
we xfer users from an "old" backend server to another "old" server and
then reconstruct, we have no problems. It works a
Hi,
Quoting Maria McKinley :
Simon Matter wrote:
Simon Matter wrote:
Hi there,
I tried posting this on the squirrelmail plugin mailing list, but
didn't
get a response, so thought maybe someone on this list might be able to
give me a hint, since I know a lot of you have sieve set up with cyru
Quoting Simon Matter :
>> Has anyone used the 2.3.14 autocreate patch on 2.3.15? There does not
>> seem to be a patch for 2.3.15 on the site and I have tried using the
>> 2.3.14 patch and it does not apply cleanly. It fails at
>> imap/Makefile.in
>
> Find attached my version of the patch adopted
Quoting nunatarsuaq :
Found a partial solution:
1. In my case the filter script should refer to user's mailbox as
"user/USERNAME/folder"
2. Then I used sievec to create bytecode file for a particular
user's sieve dir:
/usr/lib/cyrus/bin/sievec sieve.filter /var/lib/sieve/U/USERNAME/defaultb
Quoting Marc Patermann :
Hi,
Thomas Vogt schrieb:
I'll move several thousand cyrus mailboxes to a new server. Old
Server was running cyrus imapd 2.2, new server runs cyrus imapd 2.3.
The task seems pretty trivial. I tar all users starting with A (later
b,c,d..), create all mailboxes on the n
Quoting Ingo Steuwer :
Hi,
I'm in building a test-environment where I'd like to setup my cyrus
mail spoll
(/var/spool/cyrus/mail) on a NFS filesystem. I know that locking issues in
NFSv3 prevent a clean mail delivery with cyrus and want to give NFSv4 a try.
My suspect from older tests was,
e an other BUG introduces by making the
defaultpartition optional.
See BUG 3170 http://bugzilla.andrew.cmu.edu/show_bug.cgi?id=3170
Regards
Michael Menge
M.MengeTel.: (49) 7071/29-70316
Uni
Quoting manu :
Dear all,
after having migrated a user account with imapsync all folders that have
subfolders in them are flagged with the \NoSelect flag. Is there any way
to change this flag? As there is nothing in the mailinglist nor in
google I feel that I might be missing the obvious, but
7;t know if
cyrus can met "all" ;-)
If yes, can you provide me the links to met the above requirements
Have a look at the cyrus doc directory, there you should find all
information about configuration and the features of cyrus.
If you have more questions aks them
Quoting Nybbles2Byte :
Hello,
Is there a way to have the "tls_..." options in the imap.conf file
work for multiple domains so that as many virtual domains as you
want can authenticate without the client software popping up
warnings like "certificate does not match this server" ?
It de
don't play well with nonexistent or unselectable mailboxes
(eg. Microsoft Outlook).
Regards
Michael Menge
M.MengeTel.: (49) 7071/29-70316
Quoting Eric Luyten :
On Thu, January 14, 2010 8:26 pm, Wil Cooley wrote:
Adam Tauno Williams wrote:
Some earlier versions of Cyrus had quota calculation issues with big
quotas (2GB? 4GB?) or big mailboxes. I think there is a blurb in WMOGAG
about that, and what version fixed it.
It happe
Hi,
Quoting Gabriele Bulfon :
Hi,
in the recent months I started to have performance issues on some
installations
deployed happily for many years.
I tried running a reconstruct of all mailboxes during the weekend,
but no results.
Maybe the amount of mail is now affecting imap performance?
Hi,
Quoting Scott Lambert :
I am about to bring up the second of several virtual domains on my
Cyrus-IMAPd 2.3.15 installation. I've been Googling but can't seem
to come up with a useful search string for finding posts talking
about using multiple secure certificates for POP/IMAP connections t
, otherwise you can get infinite mail loops.
Bron.
Do be more specific the deliver.db is used to store the informations needed
to prevent loops by redirect and vacation, but the suppression can be
disabled with "duplicatesuppression: 0"
Mic
sion works with sievescripts. But you will still see
duplicate_mark: in the log.
Regards
Michael Menge
M.MengeTel.: (49) 7071/29-70316
Universität Tübingen
Hello,
Quoting Matthias Wulkow :
Hello,
I have imported quite a big amount of mails from another mailsystem
(drag and drop from a PC from one account to another within the same
client - the old one was a kind of Exchange account (software known as
ShareFolder) and the new one a cyrus imap acco
Hi,
Quoting ram :
We have cyrus servers deployed at many places where clients have varying
mail storage.
We have been taking backups to help in situations of human errors
( where you get complaints like ..oops, I accidentaly deleted all my
mails!! ) and in case of hardware failures
Things ha
Hi,
Quoting Thomas Vogt :
Hi
I've to move a large cyrus entity from one facility to another with no
or at least a little downtime.
I thought I setup a second cyrus entity on my new data center and use
cyrus replication to transfer all data to this new cyrus slave. After
all mails are copied,
the user has a folder "Apple Mail To Do" . As the errormessage did not
include the folder or the file with the unexpected end I don't know if
these things are related or not.
I would like to know if someone can confirm this.
cyrus lmtpd running and should use lmtp if possible.
In short, Im confused about the differences between Postfix lmtp and Cyrus
lmtpd and how they interact.
If you configure postfix to use lmtp the lmtp client of postfix will
talk to the lmtp server (lmtpd) of cyrus.
Michael
Quoting "Simpson, John R" :
Greetings all,
I've spent a good deal of time searching the Info-Cyrus
archives (and various googled articles) to identify the recommended
ways to improve Cyrus availability and reduce disaster recovery
time. The two main approaches appear to be Cy
Hi,
Quoting Diego Ventrice :
Danke Marc, clearer now.
And sure, I'll take answers from anyone.
About this:
What do you think files named "header", "index", "cache", "expunge" and
"squat" in this context contain? ;)
Ich denke this are the cyrus header index and cache files generally
stored
Quoting Nybbles2Byte :
Hello Reinaldo,
I don't use either nor do I know what these are. My limit of
knowledge about sieve is that it came as part of cyrus but I have
never used it.
I have installed horde and it has a program called ingo that filters
email and uses sieve to do it. Howeve
Hello,
in sieve there are some restrictions for vacations to prevent
mailloops and replys to mails not sent directly to the mailaddress
of the user.
The vacation rule has the option ":addresses" to specify additional
addresses which belong to the user. There is no way cyrus could know the
Forwar
Hi,
Quoting Eric Doutreleau :
Hi
I have a working imap server which run the cyrus imapd 2.3.13 version
I would like to setup replication to a new server.
There have been some fixes in cyrus regading replication and skiplist
since 2.3.13 you might want to update to 2.3.16
i have careful
Quoting Andre Nathan :
Hello
I'm setting up a two-machine cyrus cluster using OCFS2 over DRBD. The
setup is working fine, and I'm now considering the load balancing
options I have.
For Clustering Cyrus have a look at
http://cyrusimap.web.cmu.edu/twiki/bin/view/Cyrus/CyrusCluster
I have no e
Hi,
Quoting Martin Kraus :
Hello.
I'm having problem with emails being inaccessible through imap
after reading
it in outlook. The email file is still in the INBOX if I grep for
it's mail id, but no
imap client displays it. I've tried with mutt and pop3 but I
couldn't find the
email ei
Quoting Martin Kraus :
On Tue, May 11, 2010 at 06:44:47PM +0200, Michael Menge wrote:
If you use the delayed expunge feature of cyrus and the eMail gets
deleted it stayes on the filesystem till cyr_expire removes them.
See expunge_mode in imapd.conf
I'm not using expunge mode de
1 - 100 of 382 matches
Mail list logo