Phy programming support for C10 phy. This is the first part of
the series that adds support for PICA phy. Later stage the support
for C20 phy is added. This series gets the eDP going.
v2: Register refinitions in intel_cx0_phy_regs.h file (Jani)
v3: Add waits for between message bus writes (Imre)
General cleanups and macro definitions (Imre)
Signed-off-by: Mika Kahola <mika.kah...@intel.com>
Ankit Nautiyal (1):
drm/i915/display/mtl: Fill port width in
DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI
Clint Taylor (1):
drm/i915/mtl: Initial DDI port setup
José Roberto de Souza (1):
drm/i915/mtl/display: Implement DisplayPort sequences
Mika Kahola (4):
drm/i915/mtl: Add DP rates
drm/i915/mtl: Create separate reg file for PICA registers
drm/i915/mtl: Add vswing programming for C10 phys
drm/i915/mtl: MTL PICA hotplug detection
Radhakrishna Sripada (1):
drm/i915/mtl: Add Support for C10 PHY message bus and pll programming
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/display/intel_cx0_phy.c | 1259 +++++++++++++++++
drivers/gpu/drm/i915/display/intel_cx0_phy.h | 47 +
.../gpu/drm/i915/display/intel_cx0_phy_regs.h | 190 +++
drivers/gpu/drm/i915/display/intel_ddi.c | 447 +++++-
.../drm/i915/display/intel_ddi_buf_trans.c | 31 +-
.../drm/i915/display/intel_ddi_buf_trans.h | 6 +
drivers/gpu/drm/i915/display/intel_display.c | 6 +-
.../i915/display/intel_display_power_map.c | 1 +
.../drm/i915/display/intel_display_types.h | 13 +
drivers/gpu/drm/i915/display/intel_dp.c | 15 +-
drivers/gpu/drm/i915/display/intel_dpll.c | 26 +-
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 2 +-
.../drm/i915/display/intel_modeset_verify.c | 2 +
drivers/gpu/drm/i915/i915_irq.c | 249 +++-
drivers/gpu/drm/i915/i915_reg.h | 43 +-
drivers/gpu/drm/i915/i915_reg_defs.h | 57 +
17 files changed, 2361 insertions(+), 34 deletions(-)
create mode 100644 drivers/gpu/drm/i915/display/intel_cx0_phy.c
create mode 100644 drivers/gpu/drm/i915/display/intel_cx0_phy.h
create mode 100644 drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
--
2.34.1
