is for BIOS and the
non-volatile is for the OS.
- Eric
-Original Message-
From: Alexey Vlasov [mailto:[EMAIL PROTECTED]
Sent: Friday, October 31, 2008 10:48 AM
To: ipmitool-devel@lists.sourceforge.net
Subject: Re: [Ipmitool-devel] Problem with console redirection in
SR1500
Hi
' setting is for BIOS and the
non-volatile is for the OS.
- Eric
-Original Message-
From: Alexey Vlasov [mailto:[EMAIL PROTECTED]
Sent: Friday, October 31, 2008 10:48 AM
To: ipmitool-devel@lists.sourceforge.net
Subject: Re: [Ipmitool-devel] Problem with console redirection in
SR1500
Hi.
I
On Wed, Oct 29, 2008 at 04:20:50PM -0600, Mike Lovell wrote:
I think the problem is that you are using the wrong serial port. From my
experience (on Supermicro gear, not Intel), Serial B is the port used by
the IPMI card. Serial A is usually the port actually on the back or
front of the box.
Hi.
I have a problem with setup of console redirection in server chassis
Intel SR1500 and ipmitool.
My setup in BIOS:
console redirections.
* serial port A
* flow control - none
* rate - 38.4K
* terminal type - VT100
* legacy OS redirection - disabled
serial port configuration.
* serial A -
Alexey Vlasov wrote:
Hi.
I have a problem with setup of console redirection in server chassis
Intel SR1500 and ipmitool.
My setup in BIOS:
console redirections.
* serial port A
* flow control - none
* rate - 38.4K
* terminal type - VT100
* legacy OS redirection - disabled
serial