On Thu 2017-Oct-19 17:38:43 +0500, sameer mughal
wrote:
Hi All,
Can anyone update me that Is the same configuration on srx240h2 will work
on srx550 or need some modification?
Try it and see?
Depends on the extent of the config. There are some things that are
I just reread my response, or you might have 2 problems... one with the
filter and one elsewhere...
-Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Or remove the filter for a moment... if all works then you know there's an
issue with the filter... if it still doesn't work, then you know your
problem is elsewhere.
-Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
My working lsys-based ldp l2circuit (aka martini) config...
r2@lab-mx104:r2> show configuration protocols l2circuit | display set
set logical-systems r2 protocols l2circuit neighbor 1.1.255.6 interface
lt-0/1/0.210 virtual-circuit-id 1
r2@lab-mx104:r2> show configuration interfaces lt-0/1/0.210
Hi
Is MX router has firewall filter on loop back?
If so pleae make sure ldp related port and IP address allow
Thanks
Brijesh
On Saturday, October 21, 2017, wrote:
> Send juniper-nsp mailing list submissions to
> juniper-nsp@puck.nether.net
Caio,
Have you check something?
Are these extremes let the signaling pass thru?
att
Alexandre
Em 21 de out de 2017, à(s) 07:54, Rafael Ganascim
> escreveu:
Just more checks:
How is the MPLS forwarding table for the negotiated Labels for
Just more checks:
How is the MPLS forwarding table for the negotiated Labels for loopback and
l2circuit?
Are you using label PHP? Can you switch It off?
Is the LDP adjacency up and exchanging labels?
Are the l2circuit neighbors configured between loopback interfaces?
Regards,
Em 20 de out de
7 matches
Mail list logo