Hi Vincent,
Thank you for a good advice. I saw this page before, but now reviewed
it. According to it only second opton could qualify and I'm going to
test it. Anyway, for final solution QFX10K will be in consideration.
Kind regards,
Andrey
Vincent Bernat писал 2019-09-26 02:49:
Hello,
tin
Sent: 25 septembre 2019 11:37 -04
Subject: Re: [j-nsp] EVPN on QFX5200
To: Vincent Bernat
Cc: Liam Farr; juniper-nsp@puck.nether.net
> Thank you for reply.
> I meant a slightly different thing. Currently my setup is in lab stage
> with QFX5110 as spines and QFX5000 as leaves. I ne
Thank you for reply.
I meant a slightly different thing. Currently my setup is in lab stage
with QFX5110 as spines and QFX5000 as leaves. I need to connect vlans
running in EVPN-VXLAN fabric to an aggregation router, ideally two of
them for redundancy. To have a redundant gateway for hosts
❦ 20 septembre 2019 11:47 -04, Andrey Kostin :
> Could you advise about various external connectivity options for
> EVPN-VXLAN fabric? Let's say there are two spines that centrally route
> VXLAN vnis and some leaves. Spines are CEs from core MPLS network
> perspective. I understand that EVPN can
Hi Vincent,
Thank you for elaborating on this, I had the same question when read
your reply.
It may be not an issue for a small deployment but definitely should be
considered in terms of BCP.
Could you advise about various external connectivity options for
EVPN-VXLAN fabric? Let's say there
❦ 20 septembre 2019 11:55 +12, Liam Farr :
> I'm running VXLAN with ingress-node-replication in prod, can you
> explain what you mean by havoc?
When using EVPN, prefer using "set protocols evpn multicast-mode
ingress-replication". Using "set vlans XXX vxlan
ingress-node-replication" will send
Hi,
I'm running VXLAN with ingress-node-replication in prod, can you
explain what you mean by havoc?
e.g.
show vlans
VLAN-NAME {
interface xe-0/0/2.2;
no-arp-suppression;
vxlan {
vni 561;
encapsulate-inner-vlan;
ingress-node-replication;
}
}
❦ 19 septembre 2019 16:25 -04, Andrey Kostin :
> You can also try to use this scrips to generate configs for your
> specific configuration:
> https://github.com/JNPRAutomate/ansible-junos-evpn-vxlan/
I would stay away from most of the random examples available on Internet
(even ones from
Hi Joe,
There are some documents on Junipers website describing principles and
including configurations, like this:
https://www.juniper.net/us/en/training/jnbooks/day-one/data-center-technologies/data-center-deployment-evpn-vxlan/
Some parameters can vary, so it depends on what your
Does anyone have a working example for EVPN configuration on the QFX 5200's
that they'd be willing to share?
I've got four 5200's split between two DC's with 2x100G links between each
pair in a mesh. I'd like to run EVPN on them such that my network
infrastructure between the sites is transparent
10 matches
Mail list logo