Re: [j-nsp] SSD in RE-S-2000-4096

Hi Alex, Yes I had great success doing this on around 12x RE2000's I used Intel S3700 200GB SSD's. It lowered the boot time significantly. Regards, Andrew On Mon, Dec 24, 2018 at 4:40 AM Alex Martino via juniper-nsp < juniper-nsp@puck.nether.net> wrote: > Hi, > > Anybody got any success

[j-nsp] Nested route filters (policy-statements)

Hello List, So I have been using nested firewall filters for a long time now in the format of: term v4-accept-bgp { filter v4-accept-bgp; } from a parent filter statement. This then calls the "v4-accept-bgp" filter. Recently I thought, I wonder if I can do this with policy-statements to

Re: [j-nsp] MX480

Hi Saku, I was just wondering how you are populating: source-prefix-list { rsvp_neighbors; } Manually, or via an apply-path ? Regards, Andrew On Wed, Jun 20, 2018 at 1:03 AM, Saku Ytti wrote: > Hey Rei, > > Great catch. > > We have this: >

[j-nsp] MX104 updated x86 Route Engines

Around 18 months ago I heard rumours that x86 based RE's were in development for the MX104 chassis, but since then I have heard nothing about them. Does anyone else know anything about them ? Regards, Andrew ___ juniper-nsp mailing list

Re: [j-nsp] EVPN + QinQ, individual bridge-domains for CVID's

This is on MX boxes running 15.1R6 I suspect I am going to end up implementing a hack to get this working ! On Wed, Oct 25, 2017 at 4:16 AM, Alain Hebert wrote: > Hi, > > Depending of your relation with your local JNP resellers. > > You could get vMX, vQFX and

[j-nsp] EVPN + QinQ, individual bridge-domains for CVID's

Hello All, I have been working on a scenario that I have not been able to solve. I have an ae interface that has multiple QinQ services coming in, some of these are terminating into l2circuits(CCC) and others are terminating into EVPN routing instances. So far with EVPN I have only been dealing

Re: [j-nsp] Routing Engine upgrade

Hi Craig, It is possible if you already have SCBE's to run a RE-S-S2000 in one, and a RE-S-1800x4 in the other. Though, I would only do this as a migration path :D From memory you need to have Non Stop Routing and Bridging disabled when running in this configuration, so there will be a small

Re: [j-nsp] EX CVID untagged

vlan-id 901; > vlan-id 101; > } > output-vlan-map { > pop-pop; > } > } > > This may work for you. You may also need to set the tpid. > > Regards, > Dave > > On 17 November 2015 at 22:47, Andrew Thrift <and...@networklabs.co.nz> wrote: >>