You can also disable the Management Ethernet alarm:
set chassis alarm management-ethernet link-down ignore
On Fri, Feb 15, 2019 at 08:01:11PM +, Richard McGovern wrote:
> From
>
From
https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/specifications/chassis-qfx5100-status-leds.html
Red Alarm = A major hardware fault has occurred, such as a temperature alarm or
power failure, and the switch has halted.
From this it appears NOT having
Ask your SE, it might be faster.
But sometimes the piece of software that actually control those LEDs
(and the whole chassis) runs on the OS that you have just powered off.
Maybe the red LED means that there's no chassis mgmt at all. That's
why we get extremely loud fans on power up and they calm
Then you should open a ticket with the JTAC.
-
Alain Hebertaheb...@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443
On 2/14/19 11:57 AM, Giovanni
Maybe it lights the red alarm LED so that someone looking knows that it is
shutdown/halted, not running normally.
On Thu, Feb 14, 2019 at 04:57:48PM +, Giovanni Bellac via juniper-nsp wrote:
>
> Hi,
> it matters for us, because I want to know the root cause of the red alarm LED
> when
Hi,
it matters for us, because I want to know the root cause of the red alarm LED
when powering it down with an enabled management port.
Kind regards
Am Donnerstag, 14. Februar 2019, 13:12:13 MEZ hat Anderson, Charles R
Folgendes geschrieben:
Why does it matter since the switch is
Why does it matter since the switch is halted/powered off anyway?
On Thu, Feb 14, 2019 at 08:31:43AM +, Giovanni Bellac via juniper-nsp wrote:
> Hi,
> we are issuing the command (request system power-off) when the switch is
> booted up normally. We are experiencing this on different JunOS
Hi,
we are issuing the command (request system power-off) when the switch is booted
up normally. We are experiencing this on different JunOS versions (14.1, 17.3,
18.1).
From our last email:
Short update:We experiencing the red alarm only when the management port is
connected when powering off
On Wed, Feb 13, 2019 at 11:08:16AM +, Giovanni Bellac via juniper-nsp wrote:
> after powering off a QFX5100-48T (request system power-off) the fans are
> spinning down and the ALARM LED is lightning red. The switch is working and
> looking as expected without any error messages.
>
> Is this
On Mi, Feb 13, 2019 at 11:08:16 +, Giovanni Bellac via juniper-nsp
wrote:
>
> after powering off a QFX5100-48T (request system power-off) the fans
> are spinning down and the ALARM LED is lightning red. The switch is
> working and looking as expected without any error messages.
>
> Is this
Hi all,
short update:We experiencing the red alarm only when the management port is
connected when powering off the QFX5100-48T - weird...When the management port
is not connected when powering down the device, there is no red alarm.
Kind regardsOguzhan
Am Mittwoch, 13. Februar 2019,
Hi all,
after powering off a QFX5100-48T (request system power-off) the fans are
spinning down and the ALARM LED is lightning red. The switch is working and
looking as expected without any error messages.
Is this a normal behavior ? Has someone a spare unit for a short test ?
Thanks and kind
12 matches
Mail list logo
