Re: [j-nsp] MX upgrade to 15.1R4.6: loopback filters drop all traffic

2016-09-18 Thread Saku Ytti
On 18 September 2016 at 10:18, Chuck Anderson wrote: Hey, > Has anyone upgraded from 14.2 to 15.1 and seen this issue? Right > after the upgrade, all loopback filters started dropping all traffic > causing OSPF & BGP failures, inability to ping or SSH into fxp0, etc., > despite being configured

Re: [j-nsp] MX upgrade to 15.1R4.6: loopback filters drop all traffic

2016-09-18 Thread Diogo Montagner
This sounds like activating enhanced-ip and forgetting to reboot the box immediately after it. I never saw this type of issue caused by upgrades. On Sunday, 18 September 2016, Chuck Anderson wrote: > Has anyone upgraded from 14.2 to 15.1 and seen this issue? Right > after the upgrade, all loop

Re: [j-nsp] MX upgrade to 15.1R4.6: loopback filters drop all traffic

2016-09-18 Thread Olivier Benghozi
Updated from 14.2 to 15.1R here (on several MX, same RE hardware). Didn't see this issue. Any particular stuff in your filters ? > Le 18 sept. 2016 à 09:18, Chuck Anderson a écrit : > > Has anyone upgraded from 14.2 to 15.1 and seen this issue? Right > after the upgrade, all loopback filters st

[j-nsp] MX upgrade to 15.1R4.6: loopback filters drop all traffic

2016-09-18 Thread Chuck Anderson
Has anyone upgraded from 14.2 to 15.1 and seen this issue? Right after the upgrade, all loopback filters started dropping all traffic causing OSPF & BGP failures, inability to ping or SSH into fxp0, etc., despite being configured to allow the appropriate management & control plane traffic which wa