(client sent a DHCPDECLINE packet)
Thank you,
Darren Ankney
On Thu, Aug 8, 2024 at 3:55 AM luckydog xf wrote:
>
> Actually I have tested lease4_expire, leases4_committed and lease4_renew
> already. They're easy to verify.
> But the rest ones, I don't understand which s
lient sent a
hint as was shown in the provided log message.
I am confused.
Thank you,
Darren Ankney
On Thu, Aug 8, 2024 at 6:59 AM Ede Wolf wrote:
>
> Hello,
>
> new to kea I am having a /56 network, that is being delegated downstream
> by kea in two /57 nets.
> Kea seems to assign tho
-dhcp4.packets). At some debuglevel (45 perhaps?), the logger
starts to dump the contents of the packets. This may show the data
you are after if it is able to pretty print the content of the
option(s).
Thank you,
Darren Ankney
On Fri, Aug 9, 2024 at 8:25 AM Uskokovic, Sinisa
wrote:
>
> Hi
eadthedocs.io/en/kea-2.6.1/arm/lease-expiration.html#configuring-lease-affinity
Thank you,
Darren Ankney
On Fri, Aug 9, 2024 at 4:32 AM Wilhelm Schuster wrote:
>
> Hi list,
>
> I'm evaluating switching from OpenWRT to VyOS on my main home network
> router setup. VyOS integra
y default, the lease will be held for the client beyond the end of
the lease for 3600 seconds and only used if there is no free lease
available (when your third client appears). The only thing I am
unsure of is if this also applies to prefix delegation. But it is easy
enough to test.
Thank you,
t try
adding a small pool to the subnet to see what happens (i.e., does the
client get an address, though I doubt that would be the case).
Thank you,
Darren Ankney
On Sun, Aug 18, 2024 at 5:03 AM Jan Jurko via Kea-users
wrote:
>
> Good day.
> I have Kea 2.6.1 installed. I use v4 and v6 d
help here. Use tcpdump to dump the packets: tcpdump -w dump.pcap
port 547. Open the file in Wireshark. See what was requested in the
Solicit vs what was sent in the Advertise.
Thank you,
Darren Ankney
On Sun, Aug 18, 2024 at 7:03 AM Jan Jurko via Kea-users
wrote:
>
> Hello Darren.
>
enough.
> >
> > Thank you very much for your help guys!
> >
> > Jan
> >
>
> It should be documented somewhere. I had the same problem!
It is:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp6-srv.html#interface-configuration
Thank you,
Darren Ankney
--
ISC fu
Hi Marek,
I do not think you are going to be able to have two reservations for
the same DUID in the same subnet or shared-network. You might be able
to set one for DUID and the other for hw-address if that is available
to Kea, however.
Thank you,
Darren Ankney
On Thu, Aug 22, 2024 at 8:22 AM
Hi Marek,
There should be one DUID per client and one IAID per interface. See
here: https://www.rfc-editor.org/rfc/rfc8415#section-4.2
Thank you,
Darren Ankney
On Fri, Aug 23, 2024 at 1:20 AM Marek Greško via Kea-users
wrote:
>
> Hello,
>
> is it a limitation of kea or of the dh
Hello Marek,
I do not believe there is a way to assign a reservation to an IAID. I
also cannot think of a way to use multiple keys for a reservation.
Thank you,
Darren Ankney
On Sat, Aug 24, 2024 at 11:59 AM Marek Greško via Kea-users
wrote:
>
> Hello,
>
> yes I understand that pe
at
is connected (surely you are not connecting both interfaces
simultaneously)?
Thank you,
Darren Ankney
On Sun, Aug 25, 2024 at 6:38 AM Marek Greško via Kea-users
wrote:
>
> I am pretty convinced the ISC DHCPD was able to do it. So the only way to
> workaround the problem is to create sep
in advance for applying!
--
Thank you,
Darren Ankney
Director of Technical Support
ISC
--
ISC funds the development of this software with paid support subscriptions.
Contact us at https://www.isc.org/contact/ for more information.
To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea
ed as well. It doesn't appear so from the lease you
pasted as I don't see any data in the "user-context" field.
Thank you,
Darren Ankney
On Wed, Aug 28, 2024 at 3:23 PM Mark Blackford wrote:
>
> Hello,
>
>
>
> I am trying to use the Bulk Leasequery featur
-srv.html#including-specific-dhcpv4-options-in-reservations
and here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#global-reservations-in-dhcpv4
Thank you,
Darren Ankney
On Thu, Sep 5, 2024 at 9:24 AM wrote:
>
> Hello.
>
> Is it possible to create client class with arra
uot;2001:db8:ff::77"
},
{
"hw-address": "01:02:03:04:05:06",
"ip-address": "2001:db8:ff::78"
}
]
Thank you,
Darren Ankney
On Sun, Sep 8, 2024 at 7:47 AM Marek Greško via Kea-users
wrote:
>
> Thi solves completely differen
79
(defined in RFC 6939) so that Kea could be supplied with the real mac
address of the interface.
Thank you,
Darren Ankney
On Sun, Sep 8, 2024 at 12:52 PM Marek Greško
wrote:
>
> Hello,
>
> the mac-address in dhcpv6 sense is not a real mac address. It is some extract
> from dui
Hi ,
If you need to set options on a per client basis, I suggest you have a
look at "reservations":
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#including-specific-dhcpv4-options-in-reservations
Thank you,
Darren Ankney
On Tue, Sep 17, 2024 at 4:47 AM wrote:
Hello,
No ip-address required. See first example shown here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#global-reservations-in-dhcpv4
Thank you,
Darren Ankney
On Tue, Sep 17, 2024 at 5:39 AM wrote:
>
> Yes, but reservation reqire also dedicated ip address? Or i dont unde
Hi Dheeraj,
Perhaps this might be of use? https://reports.kea.isc.org/dev_guide/
On Tue, Oct 15, 2024 at 9:21 AM Dheeraj Kandula wrote:
>
> Does KEA support the SO_REUSEADDR option while creating the socket for
> kea-dhcp4?
> Can someone share the code file where the socket related operations
Hello Jeff,
I have been informed privately by someone on the Kea development team
who also worked on ISC DHCP in the past that I am incorrect here. ISC
DHCP dynamically resolved FQDNs and did in fact manage multiple
answers. Sorry for the misinformation!
Thank you,
Darren Ankney
On Thu, Oct
ooked that closely at the traffic but it does arrive
at local DHCP servers somehow so it might be?
Thank you,
Darren Ankney
On Mon, Sep 30, 2024 at 12:30 PM Matt Crum wrote:
>
> Hi all,
>
>
>
> We’re trying to run some tests against an ISC DHCP failover DHCP pair using
> perfd
use the same interface
in a shared network). See here:
https://kea.readthedocs.io/en/kea-2.6.0/arm/dhcp6-srv.html#local-and-relayed-traffic-in-shared-networks
Hopefully one of these will allow you to workaround the problem you are having.
Thank you,
Darren Ankney
On Fri, Oct 4, 2024 at 11:24 AM
-in-shared-networks
and here:
https://kea.readthedocs.io/en/kea-2.4.1/arm/dhcp4-srv.html#using-a-specific-relay-agent-for-a-subnet
I am not sure as I've not tested this.
Thank you,
Darren Ankney
On Wed, Oct 16, 2024 at 6:41 AM Giddings, Bret via Kea-users
wrote:
>
> Hi,
>
>
>
to users such as yourself who thought that lookups
were ongoing when they were not.
Thank you,
Darren Ankney
On Thu, Oct 10, 2024 at 3:26 AM Jeff Armstrong wrote:
>
> Isn't this a major loss of functionality? Is there a plan / ticket to add
> this core feature?
>
> Man
sult in a 255.255.255.0 netmask being sent to the client but:
"subnet": "192.0.2.0/23",
would result in a 255.255.254.0 netmask being sent to the client.
Thank you,
Darren Ankney
On Mon, Nov 4, 2024 at 3:04 AM Hartmann, Jörg
wrote:
>
> Hello Darren,
>
> your adv
use it was experimental.
Thank you,
Darren Ankney
On Tue, Oct 29, 2024 at 12:33 PM Mike via Kea-users
wrote:
>
>
>
> On 10/28/2024 5:21 AM, Darren Ankney wrote:
> > Hi,
> >
> > You aren't missing anything. It is a message at the level WARN. From
> > my ser
Hi Joseph,
This looks normal to me. This is a record of API commands adding lease
details. That is how HA works. The API (libdhcp_lease_cmds.so) is used to
update leases.
See here:
https://kea.readthedocs.io/en/kea-2.4.1/arm/hooks.html#std-isccmd-lease4-update
Thank you,
Darren Ankney
On
Hi Jesper,
This is solved in 2.6.1 with "stash-agent-option": true See here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#stash-agent-options
for further information.
Thank you,
Darren Ankney
On Sat, Nov 2, 2024 at 3:15 AM Jesper Nørgaard wrote:
>
> All,
>
>
/arm/database-connectivity.html
and here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#database-configuration4
By default Kea will just exit without trying to reconnect, I believe.
Thank you,
Darren Ankney
On Fri, Oct 25, 2024 at 7:56 AM Brendan Kearney wrote:
>
> On 10/25/24 6:28 AM,
:
yes, number of threads: 8, queue size: 64
If you think this should change, perhaps you could open a an issue?:
https://gitlab.isc.org/isc-projects/kea/-/issues
Thank you,
Darren Ankney
On Sun, Oct 27, 2024 at 8:40 PM Mike via Kea-users
wrote:
>
>
> OK, this is just a home network here,
Hi Brendan,
The ? are due to mysql prepared statements. See here:
https://dev.mysql.com/doc/refman/8.4/en/sql-prepared-statements.html
On Tue, Oct 22, 2024 at 1:59 PM Brendan Kearney wrote:
>
> On 4/17/24 5:49 AM, Peter Davies wrote:
>
> Hi Brendan,
>It is not possible to see any details fr
interface? If this is the case (the interface is different
than other successful packets), perhaps see if there are ANY
successful packets sent on this interface? Perhaps you could share
some logs and/or your configuration file?
Thank you,
Darren Ankney
On Fri, Nov 8, 2024 at 3:19 AM BÖSCH Christian
r routing problem if one of the routers dies?
Thank you,
Darren Ankney
On Thu, Nov 7, 2024 at 10:50 AM Andrey Kostin wrote:
>
> Hi Darren,
>
> I plan to have two DHCP relay routers facing IPoE subscribers and would
> like to make relay selection more deterministic, so that one rela
Hi Andrey,
There is no way to do this that I am aware of. Kea is designed to be
fast. There are many ways to influence what subnet is selected,
however. Perhaps some detail about what you are trying to do might
reveal another idea for a solution?
Thank you,
Darren Ankney
On Mon, Oct 28, 2024
e Kea was never able to actually try to connect, it may not retry.
This would have to be tested.
Thank you,
Darren Ankney
On Wed, Oct 30, 2024 at 2:50 AM Wagner Vlastimil - HZS Ústeckého kraje
wrote:
>
> I made in systemd service:
>
> ExecStartPre=/bin/bash -c "until host db.e
wrong subnet mask will be computed and
sent to the client as well since these subnets do not match what is
configured on the interface, it seems.
Thank you,
Darren Ankney
On Wed, Oct 30, 2024 at 9:41 AM Sten Carlsen wrote:
>
>
> Thanks
>
> Sten
>
> On 30 Oct 2024, at 14.24,
the shared-network (or remove
the relay address from it) as I think Kea will only find one of the
shared-networks based on the relay address. It won't go looking for
another if there are no addresses available in the first, I don't
believe.
Thank you,
Darren Ankney
--
ISC funds the de
(your browser has built in trusted certs
to create a chain of trust that Kea won't have, I think). It is best
to use a self-signed cert, at least to start with, to understand the
process. You can create a self-signed cert with open-ssl.
Thank you,
Darren Ankney
On Mon, Nov 11, 2024 at 3:4
e a packet capture of the
exchange between one of these clients and the Kea server where this
log message occurs.
If you don't want to send this much detail to the public mailing list,
you can send it to me offline: darren dot ankney at gmail dot com.
Thank you,
Darren Ankney
On Tue, Nov 12, 2
Hi Christian,
Do other clients experience this permission denied or is it only this
single client?
Thank you,
Darren Ankney
On Mon, Nov 11, 2024 at 5:13 AM BÖSCH Christian wrote:
>
> Hi Peter,
>
>
>
> All the dhcp requests are coming through a relay agent.
>
> So the
Hi,
Please ask this question on stork-users:
https://lists.isc.org/mailman/listinfo/stork-users
Thank you,
Darren Ankney
On Wed, Sep 25, 2024 at 11:15 AM fbcadmin via Kea-users
wrote:
>
> Hello
>
> I am not sure that this is the correct mail list to ask help on Stork
>
-client-id (option 61) from the response. This KB
article has an example of performing a similar action:
https://kb.isc.org/docs/redefining-standard-options
Thank you,
Darren Ankney
On Wed, Sep 25, 2024 at 2:17 PM Giddings, Bret via Kea-users
wrote:
>
> Hi,
>
>
>
> I’m migrating
global,
shared-network, and subnet levels. By default it is unspecified."
There isn't an example, but it would be specified like this:
`"ddns-ttl-percent": .75` for example.
Thank you,
Darren Ankney
On Thu, Sep 26, 2024 at 8:01 AM Per Weisteen via Kea-users
wrote:
>
&g
lot of leases, this process can take a few
seconds or even minutes depending.
Thank you,
Darren Ankney
On Wed, Sep 18, 2024 at 1:21 PM JT ISC wrote:
>
> Hello,
>
> I have a question regarding DHCPv6 Failover.
>
> Is it recommended if I am planning on setting up Failover Kea Serv
Hi,
I'm not sure what version you are running, but in the latest stable
(2.6.1), "reservations-global" defaults to false so Kea would not find
these reservations. You can either set this flag to true or you can
move the reservations for the IP addresses into their respective
subnets (better solut
, create a class per client if you prefer, but that
may result in a performance penalty depending on the number of
classes.
Thank you,
Darren Ankney
On Tue, Sep 17, 2024 at 8:11 AM wrote:
>
> Ok, but according to documentation for creation of
> reservation(https://kb.isc.org/docs/what
should be ending up in your lease csv, I think, for
memfile ... perhaps you could compare the two? This might yield some
clue.
Thank you,
Darren Ankney
On Tue, Nov 5, 2024 at 3:30 PM JT ISC wrote:
>
> Hello,
>
> I have a Rocky 9 Linux setup with Kea 2.6.1 with the latest Mariadb 1
Hello,
Try adding an interface hint to the subnet you are attempting to
allocate. See here:
https://kea.readthedocs.io/en/kea-2.4.1/arm/dhcp6-srv.html#local-and-relayed-traffic-in-shared-networks
Thank you,
Darren Ankney
On Sun, Nov 24, 2024 at 11:41 PM Christoph Markert wrote:
>
> Hi F
Hi Vojtěch,
Looking at your logs, it seems the event started on the primary at
02:35:57. However, there are no logs past 02:35:48 included from the
secondary. Is this because there are no logs?
What version of Kea are you using?
Thank you,
Darren Ankney
On Wed, Nov 27, 2024 at 7:05 AM Dočkal
eter will allow you to control the source and
destination of these API calls.
Thank you,
Darren Ankney
On Fri, Nov 29, 2024 at 3:16 PM fbcadmin via Kea-users
wrote:
>
> Hello
>
> We currently have dhcp4 reservations in /etc/kea/kea-dhcp4.conf
>
>
> in order to mainta
wanting to listen on?
Thank you,
Darren Ankney
On Mon, Dec 23, 2024 at 9:47 PM fbcadmin via Kea-users
wrote:
>
> Is there a limit on how many network interfaces work with kea-dhcp?
>
> --
> ISC funds the development of this software with paid support subscriptions.
> C
hat in mind, are you
getting the logs you need?
Thank you,
Darren Ankney
On Wed, Jan 29, 2025 at 9:45 AM Jim Springsteen
wrote:
>
> Darren,
>
> I have been trying to use a customized response-parser-format, but I can't
> find good documentation on the options I can use to
eate a merge request though.
Thank you,
Darren Ankney
On Mon, Feb 3, 2025 at 10:57 PM John Lind wrote:
>
> I managed to pull the script from the GIT repository. It doesn't seem to be
> versioned, but I believe it is the latest and it says:
>
> # dhcp2kea by marmo
> # 6-1
Hi John,
Someone has reported for you:
https://gitlab.isc.org/isc-projects/keama/-/issues/70
Have a great week!
Thank you,
Darren Ankney
On Thu, Feb 6, 2025 at 2:55 PM John Lind wrote:
>
> Thanks, Darren. I'm retired now, and don't really have a way to get another
>
the team
would want to save these when importing the leases, more work might be
required, was what I really meant.
Thank you,
Darren Ankney
On Thu, Feb 6, 2025 at 5:18 PM John Lind wrote:
>
> Awesome! Thank you so much! I'm confused about it saying the patch "may not
> work
Hi Ralf,
If you install from packages instead of compiling, you are not
intended to use keactl, but rather systemd service files (which are
included) to control the processes. See here:
https://kb.isc.org/docs/isc-kea-packages#managing-kea-services
Thank you,
Darren Ankney
On Sat, Dec 14, 2024
-xe | grep audit | grep DENIED
There are certainly specific switches to get journalctl to find
exactly what you are after, but the above should work.
A good source of information about apparmor:
https://wiki.debian.org/AppArmor/HowToUse
Thank you,
Darren Ankney
On Sat, Dec 14, 2024 at 3:33 AM
uot;subnet": "10.10.10.0/24",
> "calculate-tee-times": true,
> "valid-lifetime": 60,
> "ddns-qualifying-suffix": "kea-dev.com",
> "option-data": [
> {
>
show more detail which makes
diagnosis of problems much easier.
Thank you,
Darren Ankney
On Tue, Dec 17, 2024 at 9:51 AM Chris Tuska via Kea-users
wrote:
>
> I am having issues with Kea DHCP, so need some help from the inter-web's
> here. This should be a simple Option 82 check and gi
time.
Thank you,
Darren Ankney
On Thu, Dec 19, 2024 at 9:02 AM Jonas Alfredsson via Kea-users
wrote:
>
> Hi,
>
> I have a question regarding the proper method of performing a backup+restore
> operation on Kea when using the memfile.
>
> For ease of conversation we d
Hi Vadim,
Stork does not yet support the configuration backend. When you
perform subnet changes on the Stork server, it will send these changes
to Kea using the subnet_cmds hook API commands. Then it will send a
config-write API command to save the configuration to disk.
Thank you,
Darren
Hello Vadim,
It looks like the hook being loaded
(/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_stat_cmds.so) may not
match the kea version in use. How was Kea installed on this system?
Were there multiple installations (e.g., install from packages and
compile from source)?
Thank you,
Darren
ality in ISC DHCP. This will first appear in a stable version
in 3.0.0.
Thank you,
Darren Ankney
On Wed, Dec 4, 2024 at 3:48 PM Isaac Brummel wrote:
>
> Hello,
> I'm in the process of migrating an ISC DHCP server to Kea. I'm trying to
> re-create a feature that we use in
t;gaps".
see:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#dhcpv4-vendor-specific-options
.. specifically the VIVSO (option 125) sub options example.
Thank you,
Darren Ankney
On Fri, Jan 24, 2025 at 6:08 AM DDFR | Ronald Blaas
wrote:
>
> Hi all
>
> I must be forgetting s
ot;
(https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp4-srv.html#ddns-for-dhcpv4)
Thank you,
Darren Ankney
On Fri, Jan 24, 2025 at 4:43 PM wrote:
>
> Hi,
>
> I am facing a quite strange issue with Windows 11 24H2 clients and Kea
> DHCPv6.
>
> Windows seems to constantly request a
.html#configuring-the-forensic-logging-hooks).
These use the same expression syntax as client-classification (see
here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/classify.html#using-expressions-in-classification).
Thank you,
Darren Ankney
On Tue, Jan 21, 2025 at 4:34 PM Jim Springsteen
wrote:
&
do what you describe is the first
example in the documentation. You may need to play with log rotation and
retention settings to keep what you want for as long as is required.
Thank you,
Darren Ankney
On Fri, Jan 17, 2025 at 1:49 PM Jim Springsteen <
jim.springst...@southslope.com> wrote
Hi Uwe,
Have you loaded the stat_cmds hook in Kea? Stork needs this for at
least some of the statistics. See here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/hooks.html#libdhcp-stat-cmds-so-statistics-commands-for-supplemental-lease-statistics
On Fri, Jan 17, 2025 at 4:08 PM Uwe Jasper wrote:
Hi Jim,
I think, if I recall correctly, that DISCOVER are not logged by the
legal log. I think if you supply a customized response-parser-format,
you'll see the option 82 from the OFFER logged.
Thank you,
Darren Ankney
On Tue, Jan 28, 2025 at 4:51 PM Jim Springsteen
wrote:
>
> Af
Hi Owen,
I can't think of anyway from within Kea to do this. Kea would have no
knowledge of what prefix was delegated. I would say that you would
need to do scripts or find some consumer device that already does this
for you (e.g., perhaps one of the ASUS routers?).
Thank you,
Darren A
Hi Jonas,
You may want to read this article about how to report crashes to the
development team: https://kb.isc.org/docs/aa-00340 it should provide
all of the necessary details about what needs to be collected and what
to do with it.
Thank you,
Darren Ankney
On Mon, Jan 13, 2025 at 2:45 PM
4
- require-client-classes -> evaluate-additional-classes - This change
is merely a renaming to make it more clear what the functionality
actually does. The naming was unclear before and led to confusion
(see:
https://kea.readthedocs.io/en/kea-2.7.5/arm/dhcp4-srv.html#additional-classificatio
Hello Yu,
I do not know for sure, but I think the intention is for the things in
the 2.7.x branch to be released in 3.0.0. Since this is already in
the 2.7.x branch, it should be in 3.0.0
Thank you,
Darren Ankney
On Tue, Jan 14, 2025 at 10:42 AM Xiao, Yu (CCI-Atlanta) wrote:
>
> Hi
ome of this is being used to make a decision about the inclusion
of options.
Thank you,
Darren Ankney
On Fri, Jan 3, 2025 at 5:13 AM Peter Davies wrote:
>
> Hi Jonas,
>
> Thank you for your interest in Kea.
>
>
> Please create a feature request issue at
> https://gitlab.
Hi,
I would think that this small number would be no problem but I don't
know that for sure. I'd advise testing prior to deployment.
Thank you,
Darren Ankney
On Tue, Dec 24, 2024 at 7:54 AM fbcadmin via Kea-users
wrote:
>
> 20
>
> On 12/24/24 05:22, Darren Ankney wrote:
/// default-valid-lifetime moved from an internal pool scope
"valid-lifetime": 604800,
/// max-valid-lifetime moved from an internal pool scope
"max-valid-lifetime": 604800,
"pools": [
{
"pool": "10.
Hi,
From what you have provided, it appears that the static ip should have
been renewed for the printer. There could be things in your
configuration that influence this, however. Could you provide your
configuration file?
Thank you,
Darren Ankney
On Sun, Dec 22, 2024 at 8:26 PM fbcadmin via
could deal with these conflicts as they come up instead of
creating potentially a worse problem with potential duplicate address
assignments?
Thank you,
Darren Ankney
On Mon, Dec 23, 2024 at 7:02 AM fbcadmin via Kea-users
wrote:
>
> I see , thanks for the info.
>
> I use ONA [ OpenNe
how widely expressions can be used in a kea configuration file
> outside of client classes.
>
> If that capability doesn’t currently exist, it’s probably very much worth
> adding to the enhancements list.
>
> Owen
>
>
> > On Jan 14, 2025, at 10:02, Darren Ankney wrot
-srv.html#additional-classification)
might help? Your goal would be to isolate these so that you only set
one per "option-data": { } so they don't overwrite each other. You
can use multiple additional client classes in each subnet to
accomplish this.
Thank you,
Darren Ankney
On Tue, Ja
ead
of the name (not 100% sure that is a valid workaround). The code for
'boot-file-name' seems to be 67. So replace "name": "boot-file-name"
with "code": 67 in one of them perhaps?
Thank you,
Darren Ankney
On Tue, Jan 14, 2025 at 2:20 PM Isaac Brummel
tork-users
(https://lists.isc.org/mailman/listinfo/stork-users), however.
Thank you,
Darren Ankney
On Wed, Jan 8, 2025 at 5:13 AM DDFR | Ronald Blaas wrote:
>
> Hi All,
>
> Just notices something
>
>
> In Stork (v2.0.0) I see a configuration issue
>
>
> Kea daemon [29
ok would be that
all servers would try to answer each client. You would also want to
run the random lease allocator to avoid collisions.
Thank you,
Darren Ankney
On Thu, Jan 9, 2025 at 4:51 AM Sébastien Nauer wrote:
>
> Hello Daren,
>
> Thank you for your comments.
>
> We use
-10-and-11
)
If you haven't already found them, there are a couple of articles about
MySQL clusters and Kea:
https://kb.isc.org/docs/getting-started-with-galera-or-percona-for-kea
https://kb.isc.org/docs/experimental-mysql-clusters-for-kea (this one might
not be relevant)
Thank you,
Darren A
? I don't know.
Perhaps you could test in a lab setting before implementation?
Thank you,
Darren Ankney
On Wed, Jan 15, 2025 at 7:40 AM Owen DeLong wrote:
>
> Can I really substitute part of a string from an include file? Forgive my
> ignorance, but what would the syntax for that l
you need to specify the address. Something like this:
"interfaces-config": {
"interfaces": [
"ens18/2001:db8::12"
]
},
See here:
https://kea.readthedocs.io/en/latest/arm/dhcp6-srv.html#interface-configuration
Thank you,
Darren Ankney
O
wister inside the double quotes) but
you might want to perform a packet capture to confirm that your client
actually has a hostname in the client-id field. I've not seen that
previously. Option 61 normally isn't present at all or contains the
mac address. But if this was working in ISC
,
Darren Ankney
On Sat, Feb 15, 2025 at 3:06 PM John Lind wrote:
>
> Thanks! Yes - I understood about the "reservations" not being stored, but
> rather a lease based on the reservation, though I did express that carelessly.
>
> So - is there a suggestion "box"?
Hi John,
Probably a combination of here:
https://reports.kea.isc.org/dev_guide/d6/dbd/dhcpDatabaseBackends.html#memfile-description
and looking at the source code.
Thank you,
Darren Ankney
On Sat, Feb 15, 2025 at 6:32 PM John Lind wrote:
>
> Where would I find the documentation on w
isn't so much keeping the reservation in
this file as it is keeping a lease. Clients who have not obtained
their reserved address will not appear in this file.
Thank you,
Darren Ankney
On Fri, Feb 14, 2025 at 5:28 PM John Lind wrote:
>
> Well, it appears that I have been on a foo
cal-and-relayed-traffic-in-shared-networks
where it says:
" it is a configuration error to specify different relay addresses for
the respective subnets in the shared network."
Thank you,
Darren Ankney
On Sat, Feb 15, 2025 at 3:10 AM Geoff Sweet wrote:
>
> Thanks kindly there Darren,
figuration. There are
no prefix for the server to allocate configured here. See here:
https://kea.readthedocs.io/en/kea-2.6.1/arm/dhcp6-srv.html#subnet-and-prefix-delegation-pools
Thank you,
Darren Ankney
On Sat, Feb 15, 2025 at 7:15 PM Geoff Sweet wrote:
>
> So I have now modified this share
)
Something like this:
"pools": [
{ "pool": "172.16.120.50 - 172.16.120.125",
"client-class": "HA_server1"
},
{ "pool": "172.16.120.126 - 172.16.120.200",
"client-class": &q
},
{
"name": "syslog-address",
"space": "vendor-encapsulated-options"
"data": "some data"
},
{
"name": "vendor-encapsulated-options"
o not know if achieving the
same behavior is possible.
Thank you,
Darren Ankney
On Sat, Apr 19, 2025 at 5:39 PM Chuck Zmudzinski via Kea-users
wrote:
>
> Hi Darren,
>
> I found the reason for the problem, but still have a question. Your
> advice to look at the logs identified the
environment, to not use a database server
with Kea as the database queries that Kea must make actually decrease
performance.
Thank you,
Darren Ankney
On Mon, Apr 21, 2025 at 2:07 PM Dave Hall via Kea-users
wrote:
>
> Hello,
>
> As we are starting to plan for an eventual migration from ISC DHC
Hi,
I am not able to reproduce this behavior. Please can you share your
entire "Before config-write" Kea configuration? Please redact any
sensitive items.
Thank you,
Darren Ankney
On Mon, Apr 21, 2025 at 9:45 AM tachibanash...@outlook.com
wrote:
>
> Hi Darren,
>
> I a
garding where to look for those logs.
You said this was a home lab. You might try temporarily allowing
updates from "any;" of any record type in your BIND server
configuration just to make sure it isn't some mistake in the security
policy you've defined.
Thank you,
Darren Ankne
Hi,
I am still unable to replicate this behavior. It works as expected
for me. Please can you give the exact API commands and data payload
required to reproduce this behavior?
Thank you,
Darren Ankney
On Wed, Apr 23, 2025 at 8:50 AM tachibanash...@outlook.com
wrote:
>
> I have unica
301 - 400 of 453 matches
Mail list logo
