date:20150607

Bug present with 3.17.8 mainline

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1451277

Title:
  Extremely high IOWait and processes hungs after utopic-vivid upgrade
  with Iomega Zip drive (IDE)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On Kubuntu, 64 bit AMD Phenom2 machine with 4 cores, and old (Geoforge 7025) 
Nvidia graphics.
  Using LVM. Machine also has a 2 disk software raid (mirroring).

  The machine was working fine before the upgrade, now it is almost
  impossible to use it... I see Wait in Top always above 60%; in dmesg
  after a few minutes that the machine is up even if the machine does
  nothing. I see hung processes (typically vgs, but occasionally also
  others).  LVM related commands (e.g. lvdisplay) almost always hung at
  the terminal. I also see in ps some kernel workers almost constantly
  stuck in D state. Also, the machine takes ages to shutdown.

  Issue remains there also if I disable X (switch off the X login
  manager, sddm) and check at the console.

  Sorry I cannot provide details with apport, but the machine has been
  switched off and I will not be able to take it up again before a few
  days from now.

  The symptom I am observing may also be a sign of failing hardware, so
  please leave the bug as unconfirmed until I make some more tests or
  someone provide details on similar issues. In the meantime I would
  like to see if others are experiencing a similar serious issue. Is
  there anything specific that has changed between utopic and vivid, I
  should look into?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1451277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1451277] Re: Extremely high IOWait and processes hungs after utopic-vivid upgrade with Iomega Zip drive (IDE)

** Summary changed:

- Extremely high IOWait and processes hungs after utopic-vivid upgrade
+ Extremely high IOWait and processes hungs after utopic-vivid upgrade with 
Iomega Zip drive (IDE)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1451277

Title:
  Extremely high IOWait and processes hungs after utopic-vivid upgrade
  with Iomega Zip drive (IDE)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On Kubuntu, 64 bit AMD Phenom2 machine with 4 cores, and old (Geoforge 7025) 
Nvidia graphics.
  Using LVM. Machine also has a 2 disk software raid (mirroring).

  The machine was working fine before the upgrade, now it is almost
  impossible to use it... I see Wait in Top always above 60%; in dmesg
  after a few minutes that the machine is up even if the machine does
  nothing. I see hung processes (typically vgs, but occasionally also
  others).  LVM related commands (e.g. lvdisplay) almost always hung at
  the terminal. I also see in ps some kernel workers almost constantly
  stuck in D state. Also, the machine takes ages to shutdown.

  Issue remains there also if I disable X (switch off the X login
  manager, sddm) and check at the console.

  Sorry I cannot provide details with apport, but the machine has been
  switched off and I will not be able to take it up again before a few
  days from now.

  The symptom I am observing may also be a sign of failing hardware, so
  please leave the bug as unconfirmed until I make some more tests or
  someone provide details on similar issues. In the meantime I would
  like to see if others are experiencing a similar serious issue. Is
  there anything specific that has changed between utopic and vivid, I
  should look into?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1451277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

2015-06-07 Thread Jane Doe

Hello everyone,
I followed the steps in #150, and after entering the make -jX command, I get 
asked a lot of things I don't understand, it's the first time I am compiling a 
kernel.
Is this how it should be? I just pressed enter on everything, since I guess 
this sets up the default values...?

I'm running Ubuntu 15.04 on an Acer Aspire VN7-571G (dual-boot with Windows 
8.1).
I entered make -j4, I have the Intel Core i7-5500U 2.4 which has 2 cores but 
is able to behave like it had 4 cores. Should I've been entering make -j2 
instead?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1383184

Title:
  Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Card detail: Qualcomm Atheros Device [168c:003e] (rev 20)
  Subsystem: Bigfoot Networks, Inc. Device [1a56:1525]

  This is on a fully updated Ubuntu Server 14.04 installation, with the 
ubuntu-desktop environment installed. This happened in order to get the md raid 
drivers for raid0 on my system, as the desktop version doesn't support them.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  matanis2333 F pulseaudio
   /dev/snd/controlC0:  matanis2333 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6
  InstallationDate: Installed on 2014-10-16 (3 days ago)
  InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.3)
  IwConfig:
   p2p1  no wireless extensions.
   
   lono wireless extensions.
  MachineType: Micro-Star International Co., Ltd. GT72 2QE
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed 
root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.7
  RfKill:
   
  Tags:  trusty
  Uname: Linux 3.13.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/15/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1781IMS.10D
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1781
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:0.C
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: GT72 2QE
  dmi.product.version: REV:0.C
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1451277] Re: Extremely high IOWait and processes hungs after utopic-vivid upgrade with Iomega Zip drive (IDE)

I would also rise priority, since the issue

- makes it often impossible to shut down the machine cleanly, requiring a hard 
reset which may result in data loss;
- I imagine that it can make it quite hard to install security updates from 
ubuntu as any update of the kernel package tends to result in the system 
hanging at the make initramfs phase, that probably queries all system drives.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1451277

Title:
  Extremely high IOWait and processes hungs after utopic-vivid upgrade
  with Iomega Zip drive (IDE)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On Kubuntu, 64 bit AMD Phenom2 machine with 4 cores, and old (Geoforge 7025) 
Nvidia graphics.
  Using LVM. Machine also has a 2 disk software raid (mirroring).

  The machine was working fine before the upgrade, now it is almost
  impossible to use it... I see Wait in Top always above 60%; in dmesg
  after a few minutes that the machine is up even if the machine does
  nothing. I see hung processes (typically vgs, but occasionally also
  others).  LVM related commands (e.g. lvdisplay) almost always hung at
  the terminal. I also see in ps some kernel workers almost constantly
  stuck in D state. Also, the machine takes ages to shutdown.

  Issue remains there also if I disable X (switch off the X login
  manager, sddm) and check at the console.

  Sorry I cannot provide details with apport, but the machine has been
  switched off and I will not be able to take it up again before a few
  days from now.

  The symptom I am observing may also be a sign of failing hardware, so
  please leave the bug as unconfirmed until I make some more tests or
  someone provide details on similar issues. In the meantime I would
  like to see if others are experiencing a similar serious issue. Is
  there anything specific that has changed between utopic and vivid, I
  should look into?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1451277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462767] Re: usb 3 driver hangs when suspend

2015-06-07 Thread Markus Mitsch

is there a way to edit comments?

the log in the post above shows not one try to unbind but about three
attemps to bind and unbind.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462767

Title:
  usb 3 driver hangs when suspend

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  hallo. when i go to suspend to ram sometimes usb ports(only front, cause it 
is a seperate pci-e card) loose functionality and dmesg shows:
  xhci_hcd :06:00.0: Host took too long to start, waited 16000 microseconds.
  xhci_hcd :06:00.0: PCI post-resume error -19! 

  xhci_hcd :06:00.0: HC died; cleaning up   

  xhci_hcd :06:00.0: HC died; cleaning up   

  pm_run_callback(): pci_pm_resume+0x0/0xc0 returns -19 
   
  PM: Device :06:00.0 failed to resume async: error -19

  when i suspend to ram the first time the usb disk attached to the usb
  doesnt work properly but it is only because it changes name from
  /dev/sdc to /dev/sdd.

  mfg
  markus

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-18-generic 3.19.0-18.18
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC2:  markus 1517 F pulseaudio
   /dev/snd/controlC0:  markus 1517 F pulseaudio
   /dev/snd/controlC1:  markus 1517 F pulseaudio
  CurrentDesktop: KDE
  Date: Sun Jun  7 17:29:56 2015
  HibernationDevice: RESUME=UUID=92c16179-f854-4da9-9640-95ee1fbf385d
  InstallationDate: Installed on 2015-06-02 (5 days ago)
  InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=e0fecf85-fcfb-4c70-bb96-a93d5132441f ro quiet splash video=HDMI-A-1:d
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-18-generic N/A
   linux-backports-modules-3.19.0-18-generic  N/A
   linux-firmware 1.143.1
  RfKill:
   
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden: 
'/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/03/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 2101
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P7P55D LE
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr2101:bd10/03/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7P55DLE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462767/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1451277] Re: Extremely high IOWait and processes hungs after utopic-vivid upgrade with Iomega Zip drive (IDE)

Installed python-pyqt5 as reported in bug 1439784 to make apport-collect
work.

Still getting error apport-collect crashing though.

dpkg-query: no packages found matching linux
Traceback (most recent call last):
  File /usr/share/apport/apport-kde, line 530, in module
sys.exit(UserInterface.run_argv())
  File /usr/lib/python2.7/dist-packages/apport/ui.py, line 652, in run_argv
return self.run_update_report()
  File /usr/lib/python2.7/dist-packages/apport/ui.py, line 568, in 
run_update_report
response = self.ui_present_report_details(allowed_to_report)
  File /usr/share/apport/apport-kde, line 367, in ui_present_report_details
desktop_info)
  File /usr/share/apport/apport-kde, line 184, in __init__
self.ui.ui_update_view(self)
  File /usr/share/apport/apport-kde, line 358, in ui_update_view
QTreeWidgetItem(keyitem, [str(line)])
UnicodeEncodeError: 'ascii' codec can't encode character u'\xe9' in position 
21: ordinal not in range(128)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1451277

Title:
  Extremely high IOWait and processes hungs after utopic-vivid upgrade
  with Iomega Zip drive (IDE)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On Kubuntu, 64 bit AMD Phenom2 machine with 4 cores, and old (Geoforge 7025) 
Nvidia graphics.
  Using LVM. Machine also has a 2 disk software raid (mirroring).

  The machine was working fine before the upgrade, now it is almost
  impossible to use it... I see Wait in Top always above 60%; in dmesg
  after a few minutes that the machine is up even if the machine does
  nothing. I see hung processes (typically vgs, but occasionally also
  others).  LVM related commands (e.g. lvdisplay) almost always hung at
  the terminal. I also see in ps some kernel workers almost constantly
  stuck in D state. Also, the machine takes ages to shutdown.

  Issue remains there also if I disable X (switch off the X login
  manager, sddm) and check at the console.

  Sorry I cannot provide details with apport, but the machine has been
  switched off and I will not be able to take it up again before a few
  days from now.

  The symptom I am observing may also be a sign of failing hardware, so
  please leave the bug as unconfirmed until I make some more tests or
  someone provide details on similar issues. In the meantime I would
  like to see if others are experiencing a similar serious issue. Is
  there anything specific that has changed between utopic and vivid, I
  should look into?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1451277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1451277] Re: Extremely high IOWait and processes hungs after utopic-vivid upgrade with Iomega Zip drive (IDE)

Given that apport collect fails, can the incomplete tag be removed
anyway?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1451277

Title:
  Extremely high IOWait and processes hungs after utopic-vivid upgrade
  with Iomega Zip drive (IDE)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On Kubuntu, 64 bit AMD Phenom2 machine with 4 cores, and old (Geoforge 7025) 
Nvidia graphics.
  Using LVM. Machine also has a 2 disk software raid (mirroring).

  The machine was working fine before the upgrade, now it is almost
  impossible to use it... I see Wait in Top always above 60%; in dmesg
  after a few minutes that the machine is up even if the machine does
  nothing. I see hung processes (typically vgs, but occasionally also
  others).  LVM related commands (e.g. lvdisplay) almost always hung at
  the terminal. I also see in ps some kernel workers almost constantly
  stuck in D state. Also, the machine takes ages to shutdown.

  Issue remains there also if I disable X (switch off the X login
  manager, sddm) and check at the console.

  Sorry I cannot provide details with apport, but the machine has been
  switched off and I will not be able to take it up again before a few
  days from now.

  The symptom I am observing may also be a sign of failing hardware, so
  please leave the bug as unconfirmed until I make some more tests or
  someone provide details on similar issues. In the meantime I would
  like to see if others are experiencing a similar serious issue. Is
  there anything specific that has changed between utopic and vivid, I
  should look into?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1451277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1451277] Re: Extremely high IOWait and processes hungs after utopic-vivid upgrade with Iomega Zip drive (IDE)

3.17.0 impossible to test because, for some reason, it fails to boot to
X with the nvidia proprietary driver, so it is hard to test in realistic
conditions.

In any case, I would say that the issue has been introduced in the 3.16
- 3.17 transition.

Can this be reported upstream?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1451277

Title:
  Extremely high IOWait and processes hungs after utopic-vivid upgrade
  with Iomega Zip drive (IDE)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On Kubuntu, 64 bit AMD Phenom2 machine with 4 cores, and old (Geoforge 7025) 
Nvidia graphics.
  Using LVM. Machine also has a 2 disk software raid (mirroring).

  The machine was working fine before the upgrade, now it is almost
  impossible to use it... I see Wait in Top always above 60%; in dmesg
  after a few minutes that the machine is up even if the machine does
  nothing. I see hung processes (typically vgs, but occasionally also
  others).  LVM related commands (e.g. lvdisplay) almost always hung at
  the terminal. I also see in ps some kernel workers almost constantly
  stuck in D state. Also, the machine takes ages to shutdown.

  Issue remains there also if I disable X (switch off the X login
  manager, sddm) and check at the console.

  Sorry I cannot provide details with apport, but the machine has been
  switched off and I will not be able to take it up again before a few
  days from now.

  The symptom I am observing may also be a sign of failing hardware, so
  please leave the bug as unconfirmed until I make some more tests or
  someone provide details on similar issues. In the meantime I would
  like to see if others are experiencing a similar serious issue. Is
  there anything specific that has changed between utopic and vivid, I
  should look into?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1451277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462767] Re: usb 3 driver hangs when suspend

2015-06-07 Thread Markus Mitsch

more information:

i tried to unbind the driver and it leads to some stall. the console
hangs completely.

** Attachment added: dmesg
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462767/+attachment/4411214/+files/dmesg

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462767

Title:
  usb 3 driver hangs when suspend

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  hallo. when i go to suspend to ram sometimes usb ports(only front, cause it 
is a seperate pci-e card) loose functionality and dmesg shows:
  xhci_hcd :06:00.0: Host took too long to start, waited 16000 microseconds.
  xhci_hcd :06:00.0: PCI post-resume error -19! 

  xhci_hcd :06:00.0: HC died; cleaning up   

  xhci_hcd :06:00.0: HC died; cleaning up   

  pm_run_callback(): pci_pm_resume+0x0/0xc0 returns -19 
   
  PM: Device :06:00.0 failed to resume async: error -19

  when i suspend to ram the first time the usb disk attached to the usb
  doesnt work properly but it is only because it changes name from
  /dev/sdc to /dev/sdd.

  mfg
  markus

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-18-generic 3.19.0-18.18
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC2:  markus 1517 F pulseaudio
   /dev/snd/controlC0:  markus 1517 F pulseaudio
   /dev/snd/controlC1:  markus 1517 F pulseaudio
  CurrentDesktop: KDE
  Date: Sun Jun  7 17:29:56 2015
  HibernationDevice: RESUME=UUID=92c16179-f854-4da9-9640-95ee1fbf385d
  InstallationDate: Installed on 2015-06-02 (5 days ago)
  InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=e0fecf85-fcfb-4c70-bb96-a93d5132441f ro quiet splash video=HDMI-A-1:d
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-18-generic N/A
   linux-backports-modules-3.19.0-18-generic  N/A
   linux-firmware 1.143.1
  RfKill:
   
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden: 
'/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/03/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 2101
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P7P55D LE
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr2101:bd10/03/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7P55DLE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462767/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1461986] Re: can't change usb_charge attribute in /sys/devices/platform/sony-laptop

2015-06-07 Thread Black

I've tested on 4.1.0-040100rc6-generic, and the results are the same.
Also, I've lost my wifi, which was the only problem I encountered during
the test.

** Tags added: kernel-bug-exists-upstream kernel-bug-exists-
upstream-4.1-rc5

** Tags removed: kernel-bug-exists-upstream-4.1-rc5
** Tags added: kernel-bug-exists-upstream-4.1-rc6

** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1461986

Title:
  can't change usb_charge attribute in /sys/devices/platform/sony-laptop

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I am on a Sony VAIO svf43142sn. My laptop has the ability to leave a USB port 
powered on even after shutdown to charge other devices. The value of 
/sys/devices/platform/sony-laptop/usb_charge is 1, but the USB port is not 
powered on. Also when I tried toggling it to 0 it resets back to 1 when I check 
again using cat. So I restarted the module sony-laptop with debug flags on. 
When I try:
  echo -n 0 | sudo tee -a /sys/devices/platform/sony-laptop/usb_charge

  these are the curresponding kernel logs, implying that it was a success:
  [ 9121.879908] sony_laptop: found handle 0x0155 (offset: 0x07)
  [ 9121.881386] sony_laptop: __call_snc_method: [SN07:0x0107]
  [ 9121.881394] sony_laptop: called SN07 with 0x0107 (result: 0x)

  But if I cat the value of usb charge, the change is not reflected, and I see 
this when I dmesg:
  [ 9346.202318] sony_laptop: found handle 0x0155 (offset: 0x07)
  [ 9346.202489] sony_laptop: __call_snc_method: [SN07:0x0007]
  [ 9346.202494] sony_laptop: called SN07 with 0x0007 (result: 0x0001)

  If it matters, when i simply echo 1, I will get this:
  [ 9879.675844] sony_laptop: found handle 0x0155 (offset: 0x07)
  [ 9879.676878] sony_laptop: __call_snc_method: [SN07:0x00010107]
  [ 9879.676885] sony_laptop: called SN07 with 0x10107 (result: 0x)

  The entire debug message when I restart the module(sony-laptop) is given 
here: http://paste.ubuntu.com/11551226/ . I have asked the same as a question 
on askubuntu.com. It has got a other information if you need it:
  
http://askubuntu.com/questions/628542/how-to-leave-a-usb-port-powered-during-shutdown-for-charging-mobile

  ---
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  dalton 1816 F pulseaudio
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=babf655a-816a-4c8a-ad03-6fe550cc1d60
  InstallationDate: Installed on 2015-05-28 (7 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  MachineType: Sony Corporation SVF14212SNW
  NonfreeKernelModules: wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic 
root=UUID=d52d966a-2fa0-4050-821e-99176a8fc013 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-38-generic N/A
   linux-backports-modules-3.16.0-38-generic  N/A
   linux-firmware 1.127.12
  Tags:  trusty
  Uname: Linux 3.16.0-38-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 11/18/2013
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: R0220DA
  dmi.board.asset.tag: N/A
  dmi.board.name: VAIO
  dmi.board.vendor: Sony Corporation
  dmi.board.version: N/A
  dmi.chassis.asset.tag: N/A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Sony Corporation
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrR0220DA:bd11/18/2013:svnSonyCorporation:pnSVF14212SNW:pvrC10JZ3LZ:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A:
  dmi.product.name: SVF14212SNW
  dmi.product.version: C10JZ3LZ
  dmi.sys.vendor: Sony Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461986/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1449090] Re: 1814:3290 wifi broken on RT3290 [ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush]

H.-Dirk Schmitt, this bug report is being closed due to your last
comment This bug report is being closed due to your last comment
regarding you no longer have the hardware. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find. regarding this being fixed with an update. For
future reference you can manage the status of your own bugs by clicking
on the current status in the yellow line and then choosing a new status
in the revealed drop down box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** No longer affects: linux (Ubuntu)

** Package changed: linux (Fedora) = linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Unknown = Undecided

** Changed in: linux (Ubuntu)
   Status: Unknown = New

** Changed in: linux (Ubuntu)
 Remote watch: Red Hat Bugzilla #1010431 = None

** No longer affects: linux (Ubuntu)

** Project changed: linux = linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Unknown = Undecided

** Changed in: linux (Ubuntu)
   Status: Unknown = New

** Changed in: linux (Ubuntu)
 Remote watch: Linux Kernel Bug Tracker #61621 = None

** Changed in: linux (Ubuntu)
   Status: New = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1449090

Title:
  1814:3290 wifi broken on  RT3290 [ieee80211 phy0:
  rt2x00queue_flush_queue: Warning - Queue 2 failed to flush]

Status in linux package in Ubuntu:
  Invalid

Bug description:
  Wifi is unusable slow below ubuntu. Works correctly below Windows.
  The problem is the old buggy behavior of the RT3290 wifi driver and reported 
already and solved for older ubuntu releases.

  The hardware here is a HP Notebook:  HP 350 G1

  ---
  ApportVersion: 2.14.4-0ubuntu1~ubuntu14.04.1~c42.ppa1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  gdm6050 F pulseaudio
   /dev/snd/controlC0:  gdm6050 F pulseaudio
  DistroRelease: Ubuntu 14.04
  HibernationDevice:
   # regenerated Thu, 12 Mar 2015 23:26:31 +0100
   # $HeadURL: 
svn://svn.computer42.org:3691/c42CfgRepos/trunk/etc/c42CfgRepos/data/initramfs-tools/conf.d/resume.bjoerni
 $
   # $Revision: 11763 $ $Date: 2015-03-12 22:28:05 +0100 (Thu, 12 Mar 2015) $
   # $Author: root@bjoerni $
   RESUME=UUID=ac4210aa-570d-47c6-a12e-dcfacae5665b
  MachineType: Hewlett-Packard HP 350 G1
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-34-generic 
root=/dev/mapper/system-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-34.47~14.04.1-generic 3.16.7-ckt8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-34-generic N/A
   linux-backports-modules-3.16.0-34-generic  N/A
   linux-firmware 1.127.11
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  trusty
  Uname: Linux 3.16.0-34-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  _MarkForUpload: True
  dmi.bios.date: 06/12/2014
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.12
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 21B7
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 46.0B
  dmi.chassis.asset.tag: 5CG43933TF
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.12:bd06/12/2014:svnHewlett-Packard:pnHP350G1:pvr09921040001634101:rvnHewlett-Packard:rn21B7:rvrKBCVersion46.0B:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP 350 G1
  dmi.product.version: 09921040001634101
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1449090/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1360410] Re: 1814:3290 Slow connection on RT3290: ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush

** This bug is no longer a duplicate of bug 1449090
   1814:3290 wifi broken on  RT3290 [ieee80211 phy0: rt2x00queue_flush_queue: 
Warning - Queue 2 failed to flush]

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1360410

Title:
  1814:3290 Slow connection on RT3290: ieee80211 phy0:
  rt2x00queue_flush_queue: Warning - Queue 2 failed to flush

Status in linux package in Ubuntu:
  Expired

Bug description:
  Previously I thought it was due to low WiFi signal, but I've just compared 
speeds with my phone in my room and directly below the router. The notebook 
doesn't get more then half Mbps while phone gets 6 to 8 and wired desktop - 
above 50. I've also tried changing channels.
  Kernel log is filled with
  ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
  ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-34-generic 3.13.0-34.60
  ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4
  Uname: Linux 3.13.0-34-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  int2111 F pulseaudio
   /dev/snd/pcmC0D3p:   int2111 F...m pulseaudio
  CurrentDesktop: KDE
  Date: Fri Aug 22 21:49:00 2014
  HibernationDevice: RESUME=UUID=52f0a457-e6ab-4711-a129-83170285523b
  MachineType: ASUSTeK COMPUTER INC. X502CA
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-34-generic 
root=/dev/mapper/kubuntu--vg-root ro quiet
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-34-generic N/A
   linux-backports-modules-3.13.0-34-generic  N/A
   linux-firmware 1.127.5
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/21/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X502CA.207
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X502CA
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX502CA.207:bd02/21/2013:svnASUSTeKCOMPUTERINC.:pnX502CA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX502CA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X502CA
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1360410/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462767] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462767

Title:
  usb 3 driver hangs when suspend

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  hallo. when i go to suspend to ram sometimes usb ports(only front, cause it 
is a seperate pci-e card) loose functionality and dmesg shows:
  xhci_hcd :06:00.0: Host took too long to start, waited 16000 microseconds.
  xhci_hcd :06:00.0: PCI post-resume error -19! 

  xhci_hcd :06:00.0: HC died; cleaning up   

  xhci_hcd :06:00.0: HC died; cleaning up   

  pm_run_callback(): pci_pm_resume+0x0/0xc0 returns -19 
   
  PM: Device :06:00.0 failed to resume async: error -19

  when i suspend to ram the first time the usb disk attached to the usb
  doesnt work properly but it is only because it changes name from
  /dev/sdc to /dev/sdd.

  mfg
  markus

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-18-generic 3.19.0-18.18
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC2:  markus 1517 F pulseaudio
   /dev/snd/controlC0:  markus 1517 F pulseaudio
   /dev/snd/controlC1:  markus 1517 F pulseaudio
  CurrentDesktop: KDE
  Date: Sun Jun  7 17:29:56 2015
  HibernationDevice: RESUME=UUID=92c16179-f854-4da9-9640-95ee1fbf385d
  InstallationDate: Installed on 2015-06-02 (5 days ago)
  InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=e0fecf85-fcfb-4c70-bb96-a93d5132441f ro quiet splash video=HDMI-A-1:d
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-18-generic N/A
   linux-backports-modules-3.19.0-18-generic  N/A
   linux-firmware 1.143.1
  RfKill:
   
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden: 
'/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/03/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 2101
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P7P55D LE
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr2101:bd10/03/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7P55DLE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462767/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1450396] Re: Gigabyte P35-DS3: does not stay suspended

2015-06-07 Thread Jan Rathmann

Some progress: After I failed to identify the responsible hook by
running them before 'systemctl suspend' I had the idea to test vice
versa if I would be able to reproduce the undesired wakeups with pm-
suspend by successively disabling its hooks (=moving the files in
/usr/lib/pm-utils/sleep.d to another directoy).

And I was successfull: The hook that seems to be responsible for correct
suspend on my system is 00powersave. If all other hooks are enabled
except this one, the bug also appears with pm-suspend. And on the other
hand if 00powersave is enabled (even if it is the only hook enabled), I
was not able to reproduce the bug with pm-suspend.

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1450396

Title:
Gigabyte P35-DS3: does not stay suspended

Status in linux package in Ubuntu:
Confirmed
Status in systemd package in Ubuntu:
Incomplete

Bug description:
Hello,

using Suspend-to-RAM on my system has stopped working reliably on
Vivid when booting with Systemd. When I try to suspend my PC the
following happens:

- PC turns off
- PC unwantedly wakes up (turns on) by itself again. This time span until it
turns on again can reach from a second (almost immediately) until two or three
minutes.
- In a few cases (25%), the PC stays suspended properly.

A way to workaround this problem is to boot my PC with Upstart instead
of Systemd, then this problem never happens (and has never happened in
any of the previous Ubuntu versions since 2008). Thus it seems to be a
bug somehow related to Systemd.

Other steps I have tried to solve the problem (without any success):

- Checking BIOS settings, all options are set that way that the PC should
never wake up by any event other than pressing the power button.
- Checking by running cat /proc/acpi/wakeup | grep enabled if any device
could cause wake up events. This lists my USB controller, but deactivating it
(with commands like echo USB0 /proc/acpi/wakeup) had no success on the
problem. Also suspend while running Upstart works fine despite the USB
controller listed as enabled.

In the system logs I could see no hint what causes the undesired wake-
ups.

Allthough there is one factor which seems to have a certain influence:
If I close programs like Pidgin, Skype or Firefox that cause
continuous network traffic, the chance is higher that my PC will stay
suspened (while runinng Systemd).

Kind regards,
Jan

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: systemd 219-7ubuntu3
ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
Uname: Linux 3.19.0-15-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.17.2-0ubuntu1
Architecture: amd64
CurrentDesktop: Unity
Date: Thu Apr 30 11:24:46 2015
InstallationDate: Installed on 2015-04-16 (13 days ago)
InstallationMedia: Ubuntu 15.04 Vivid Vervet - Beta amd64 (20150415)
MachineType: Gigabyte Technology Co., Ltd. P35-DS3
ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-15-generic
root=/dev/mapper/internal--ssd-root ro rootflags=subvol=@ quiet splash
SourcePackage: systemd
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/10/2008
dmi.bios.vendor: Award Software International, Inc.
dmi.bios.version: F13
dmi.board.name: P35-DS3
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.board.version: x.x
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.modalias:
dmi:bvnAwardSoftwareInternational,Inc.:bvrF13:bd07/10/2008:svnGigabyteTechnologyCo.,Ltd.:pnP35-DS3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP35-DS3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
dmi.product.name: P35-DS3
dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450396/+subscriptions

--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1446724] Re: server is stable under older kernel (3.2.0-29.46), but crashes under newer kernels

Tang Dahong, the next step is to fully commit bisect from kernel
3.2.0-29.46 to 3.2.0-65.99 in order to identify the last good kernel
commit, followed immediately by the first bad one. This will allow for a
more expedited analysis of the root cause of your issue. Could you
please do this following https://wiki.ubuntu.com/Kernel/KernelBisection
?

Please note, finding adjacent kernel versions is not fully commit
bisecting.

Thank you for your understanding.

Helpful bug reporting tips:
https://wiki.ubuntu.com/ReportingBugs

** Tags added: trusty

** Tags added: needs-bisect regression-update

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1446724

Title:
  server is stable under older kernel (3.2.0-29.46), but crashes under
  newer kernels

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  My PC is stable running Ubuntu Server 12.04.5 LTS using the old kernel
  3.2.0-29.46. But it crashes whenever I tried to update the kernel to
  3.2.0-65.99 or higher (including 14.04.2 LTS). So somewhere between
  3.2.0-29.46 and 3.2.0-65.99, changes to the kernel caused my PC to
  crash (note: I have not tried kernels older than 3.2.0-65.99, so I
  don't know the exact version that started to cause the crash).

  I think this is likely a hardware compatibility issue since I could
  not find any system logs regarding the crashes.

  My PC is very old (Compaq Evo D510 SFF/07E4h, BIOS 68602 v2.14
  08/15/2002), so I am not sure if this bug is worth troubleshooting.

  In the meantime, I am happy with the performance of my PC running 
3.2.0-29.46. But if anyone is interested in troubleshooting this bug, please 
let me know.
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 
k3.13.0-32-generic.
  ApportVersion: 2.0.1-0ubuntu17.6
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 3262 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981A at irq 17'
 Mixer name : 'Analog Devices AD1981A'
 Components : 'AC97a:41445372'
 Controls  : 26
 Simple ctrls  : 17
  CasperVersion: 1.315.1
  DistroRelease: Ubuntu 12.04
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  LiveMediaBuild: Ubuntu 12.04.5 LTS Precise Pangolin - Release i386 
(20140807.1)
  Lsusb:
   Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash 
Drive
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Compaq Evo D510 SFF
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB:
   
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper 
cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid 
initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
  ProcVersionSignature: Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-32-generic N/A
   linux-backports-modules-3.13.0-32-generic  N/A
   linux-firmware 1.79.16
  RfKill:
   
  Tags:  precise running-unity
  Uname: Linux 3.13.0-32-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 08/15/2002
  dmi.bios.vendor: Compaq
  dmi.bios.version: 686O2 v2.14
  dmi.board.name: 07E4h
  dmi.board.vendor: Compaq
  dmi.chassis.type: 15
  dmi.chassis.vendor: Compaq
  dmi.modalias: 
dmi:bvnCompaq:bvr686O2v2.14:bd08/15/2002:svnCompaq:pnEvoD510SFF:pvr:rvnCompaq:rn07E4h:rvr:cvnCompaq:ct15:cvr:
  dmi.product.name: Evo D510 SFF
  dmi.sys.vendor: Compaq

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1446724/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1449090] [NEW] 1814:3290 wifi broken on RT3290 [ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush]

You have been subscribed to a public bug:

Wifi is unusable slow below ubuntu. Works correctly below Windows.
The problem is the old buggy behavior of the RT3290 wifi driver and reported 
already and solved for older ubuntu releases.

The hardware here is a HP Notebook:  HP 350 G1

---
ApportVersion: 2.14.4-0ubuntu1~ubuntu14.04.1~c42.ppa1
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  gdm6050 F pulseaudio
 /dev/snd/controlC0:  gdm6050 F pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice:
 # regenerated Thu, 12 Mar 2015 23:26:31 +0100
 # $HeadURL: 
svn://svn.computer42.org:3691/c42CfgRepos/trunk/etc/c42CfgRepos/data/initramfs-tools/conf.d/resume.bjoerni
 $
 # $Revision: 11763 $ $Date: 2015-03-12 22:28:05 +0100 (Thu, 12 Mar 2015) $
 # $Author: root@bjoerni $
 RESUME=UUID=ac4210aa-570d-47c6-a12e-dcfacae5665b
MachineType: Hewlett-Packard HP 350 G1
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-34-generic 
root=/dev/mapper/system-root ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.16.0-34.47~14.04.1-generic 3.16.7-ckt8
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
 linux-restricted-modules-3.16.0-34-generic N/A
 linux-backports-modules-3.16.0-34-generic  N/A
 linux-firmware 1.127.11
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
Tags:  trusty
Uname: Linux 3.16.0-34-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:

_MarkForUpload: True
dmi.bios.date: 06/12/2014
dmi.bios.vendor: Insyde
dmi.bios.version: F.12
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: 21B7
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 46.0B
dmi.chassis.asset.tag: 5CG43933TF
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnInsyde:bvrF.12:bd06/12/2014:svnHewlett-Packard:pnHP350G1:pvr09921040001634101:rvnHewlett-Packard:rn21B7:rvrKBCVersion46.0B:cvnHewlett-Packard:ct10:cvrChassisVersion:
dmi.product.name: HP 350 G1
dmi.product.version: 09921040001634101
dmi.sys.vendor: Hewlett-Packard

** Affects: linux
 Importance: Unknown
 Status: Unknown

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug apport-collected kernel-bug-exists-upstream 
kernel-bug-exists-upstream-4.1-rc1 latest-bios-f.12 trusty utopic
-- 
1814:3290 wifi broken on  RT3290 [ieee80211 phy0: rt2x00queue_flush_queue: 
Warning - Queue 2 failed to flush]
https://bugs.launchpad.net/bugs/1449090
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1449090] [NEW] 1814:3290 wifi broken on RT3290 [ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush]

You have been subscribed to a public bug:

Wifi is unusable slow below ubuntu. Works correctly below Windows.
The problem is the old buggy behavior of the RT3290 wifi driver and reported 
already and solved for older ubuntu releases.

The hardware here is a HP Notebook:  HP 350 G1

---
ApportVersion: 2.14.4-0ubuntu1~ubuntu14.04.1~c42.ppa1
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  gdm6050 F pulseaudio
 /dev/snd/controlC0:  gdm6050 F pulseaudio
DistroRelease: Ubuntu 14.04
HibernationDevice:
 # regenerated Thu, 12 Mar 2015 23:26:31 +0100
 # $HeadURL: 
svn://svn.computer42.org:3691/c42CfgRepos/trunk/etc/c42CfgRepos/data/initramfs-tools/conf.d/resume.bjoerni
 $
 # $Revision: 11763 $ $Date: 2015-03-12 22:28:05 +0100 (Thu, 12 Mar 2015) $
 # $Author: root@bjoerni $
 RESUME=UUID=ac4210aa-570d-47c6-a12e-dcfacae5665b
MachineType: Hewlett-Packard HP 350 G1
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-34-generic 
root=/dev/mapper/system-root ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.16.0-34.47~14.04.1-generic 3.16.7-ckt8
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
 linux-restricted-modules-3.16.0-34-generic N/A
 linux-backports-modules-3.16.0-34-generic  N/A
 linux-firmware 1.127.11
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
Tags:  trusty
Uname: Linux 3.16.0-34-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:

_MarkForUpload: True
dmi.bios.date: 06/12/2014
dmi.bios.vendor: Insyde
dmi.bios.version: F.12
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: 21B7
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 46.0B
dmi.chassis.asset.tag: 5CG43933TF
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnInsyde:bvrF.12:bd06/12/2014:svnHewlett-Packard:pnHP350G1:pvr09921040001634101:rvnHewlett-Packard:rn21B7:rvrKBCVersion46.0B:cvnHewlett-Packard:ct10:cvrChassisVersion:
dmi.product.name: HP 350 G1
dmi.product.version: 09921040001634101
dmi.sys.vendor: Hewlett-Packard

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug apport-collected kernel-bug-exists-upstream 
kernel-bug-exists-upstream-4.1-rc1 latest-bios-f.12 trusty utopic
-- 
1814:3290 wifi broken on  RT3290 [ieee80211 phy0: rt2x00queue_flush_queue: 
Warning - Queue 2 failed to flush]
https://bugs.launchpad.net/bugs/1449090
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462767] [NEW] usb 3 driver hangs when suspend

2015-06-07 Thread Markus Mitsch

Public bug reported:

hallo. when i go to suspend to ram sometimes usb ports(only front, cause it is 
a seperate pci-e card) loose functionality and dmesg shows:
xhci_hcd :06:00.0: Host took too long to start, waited 16000 microseconds.
xhci_hcd :06:00.0: PCI post-resume error -19!   
  
xhci_hcd :06:00.0: HC died; cleaning up 
  
xhci_hcd :06:00.0: HC died; cleaning up 
  
pm_run_callback(): pci_pm_resume+0x0/0xc0 returns -19   
 
PM: Device :06:00.0 failed to resume async: error -19

when i suspend to ram the first time the usb disk attached to the usb
doesnt work properly but it is only because it changes name from
/dev/sdc to /dev/sdd.

mfg
markus

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: linux-image-3.19.0-18-generic 3.19.0-18.18
ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
Uname: Linux 3.19.0-18-generic x86_64
ApportVersion: 2.17.2-0ubuntu1.1
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC2:  markus 1517 F pulseaudio
 /dev/snd/controlC0:  markus 1517 F pulseaudio
 /dev/snd/controlC1:  markus 1517 F pulseaudio
CurrentDesktop: KDE
Date: Sun Jun  7 17:29:56 2015
HibernationDevice: RESUME=UUID=92c16179-f854-4da9-9640-95ee1fbf385d
InstallationDate: Installed on 2015-06-02 (5 days ago)
InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422)
IwConfig:
 eth0  no wireless extensions.
 
 lono wireless extensions.
MachineType: System manufacturer System Product Name
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic 
root=UUID=e0fecf85-fcfb-4c70-bb96-a93d5132441f ro quiet splash video=HDMI-A-1:d
RelatedPackageVersions:
 linux-restricted-modules-3.19.0-18-generic N/A
 linux-backports-modules-3.19.0-18-generic  N/A
 linux-firmware 1.143.1
RfKill:
 
SourcePackage: linux
UdevLog: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 10/03/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 2101
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P7P55D LE
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr2101:bd10/03/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7P55DLE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug vivid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462767

Title:
  usb 3 driver hangs when suspend

Status in linux package in Ubuntu:
  New

Bug description:
  hallo. when i go to suspend to ram sometimes usb ports(only front, cause it 
is a seperate pci-e card) loose functionality and dmesg shows:
  xhci_hcd :06:00.0: Host took too long to start, waited 16000 microseconds.
  xhci_hcd :06:00.0: PCI post-resume error -19! 

  xhci_hcd :06:00.0: HC died; cleaning up   

  xhci_hcd :06:00.0: HC died; cleaning up   

  pm_run_callback(): pci_pm_resume+0x0/0xc0 returns -19 
   
  PM: Device :06:00.0 failed to resume async: error -19

  when i suspend to ram the first time the usb disk attached to the usb
  doesnt work properly but it is only because it changes name from
  /dev/sdc to /dev/sdd.

  mfg
  markus

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-18-generic 3.19.0-18.18
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC2:  markus 1517 F pulseaudio
   /dev/snd/controlC0:  markus 1517 F pulseaudio
   /dev/snd/controlC1:  markus 1517 F pulseaudio
  CurrentDesktop: KDE
  Date: Sun Jun  7 17:29:56 2015
  HibernationDevice:

[Kernel-packages] [Bug 1462766] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462766

Title:
  Bluetooth adapter is there or not.

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Bluetooth Manager does not find adapter or device.

  Output of: 
  sudo cat /sys/kernel/debug/usb/devices

  T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 8
  B:  Alloc=  0/800 us ( 0%), #Int=  2, #Iso=  0
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0002 Rev= 3.13
  S:  Manufacturer=Linux 3.13.0-53-generic ehci_hcd
  S:  Product=EHCI Host Controller
  S:  SerialNumber=:00:1d.0
  C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
  I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
  E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

  T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=8087 ProdID=07e6 Rev= 0.14
  C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
  I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
  E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

  T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=1.5  MxCh= 0
  D:  Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=1bcf ProdID=0007 Rev= 0.13
  S:  Product=USB Optical Mouse
  C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
  I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
  E:  Ad=81(I) Atr=03(Int.) MxPS=   7 Ivl=10ms

  T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
  D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04f2 ProdID=b483 Rev=99.14
  S:  Product=USB2.0 VGA UVC WebCam
  C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=200mA
  A:  FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
  I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
  E:  Ad=83(I) Atr=03(Int.) MxPS=  23 Ivl=4ms
  I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
  I:  If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
  E:  Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us
  I:  If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
  E:  Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us
  I:  If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
  E:  Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us
  I:  If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
  E:  Ad=81(I) Atr=05(Isoc) MxPS=   0 Ivl=125us

  T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  6 Spd=12   MxCh= 0
  D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04ca ProdID=2006 Rev= 1.12
  S:  Manufacturer=Broadcom Corp
  S:  Product=BCM43142A0
  S:  SerialNumber=ACB57DABFFC5
  C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
  I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
  E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
  E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
  I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
  I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
  I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
  I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
  I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
  I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
  I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
  E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
  E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
  I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

  Output of
  cat /proc/version_signature  version.log

  Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19

  Output of
  sudo lspci -vnvn  lspci-vnvn.log
  00:00.0 Host bridge [0600]: Intel Corporation ValleyView SSA-CUnit 
[8086:0f00] (rev 0e)
Subsystem: ASUSTeK Computer Inc. Device [1043:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0

  00:02.0 VGA compatible controller [0300]: Intel Corporation ValleyView Gen7

[Kernel-packages] [Bug 1349740] Re: acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

2015-06-07 Thread iKazmi

Bug is present in upstream Kernel 4.0.4 as well.

Kernerl: 4.0.4-generic x86_64
Distro  :  Kubuntu 15.04

Hardware:
Processor:  Quad Core Intel i7-4700qm
GPU  :  Nvidia 740M (unused, nouveau blacklisted and proprietary 
drivers not installed) and Intel 4600M (driver version 06)
RAM :  8GB
SWAP   :  16GB

Actual error:

acpi PNP0A080: _OSC failed (AE_ERROR); disabling ASPM

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1349740

Title:
  acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

Status in The Linux Kernel:
  Unknown
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  [0.183201] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: linux-image-3.16.0-6-generic 3.16.0-6.11
  ProcVersionSignature: Ubuntu 3.16.0-6.11-generic 3.16.0-rc7
  Uname: Linux 3.16.0-6-generic x86_64
  ApportVersion: 2.14.4-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  caravena   2878 F pulseaudio
  CurrentDesktop: GNOME
  Date: Tue Jul 29 04:47:24 2014
  HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87
  InstallationDate: Installed on 2014-04-27 (92 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-6-generic 
root=UUID=13144268-2374-4154-83f1-c35d81306190 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-6-generic N/A
   linux-backports-modules-3.16.0-6-generic  N/A
   linux-firmware1.132
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/15/2013
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P14AAJ
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
  dmi.product.name: 530U3C/530U4C
  dmi.product.version: 0.1
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1349740/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462761] [NEW] Macbook Early 2015 TouchPad+Keyboard dont work at all

2015-06-07 Thread reroute

Public bug reported:

Also has a wi-fi issue, which doesn't work as well

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: keyboard macbook trackpad

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462761

Title:
  Macbook Early 2015 TouchPad+Keyboard dont work at all

Status in linux package in Ubuntu:
  New

Bug description:
  Also has a wi-fi issue, which doesn't work as well

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462761/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1014992] Re: Ubuntu 12.04, i386, cannot use rfcomm as regular user. Permission denied.

2015-06-07 Thread Jakub

Problem still persists, can't access any /dev/rfcomm device (nor laptop 
built-in, nor usb bluetooth adapter) as a regular user.
Tested on:
uname -a
Linux jakub-Inspiron-3537 3.19.0-20-generic #20-Ubuntu SMP Fri May 29 10:10:47 
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1014992

Title:
  Ubuntu 12.04, i386, cannot use rfcomm as regular user. Permission
  denied.

Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  After updating from 8.04 to 12.04 I cannot use rfcomm without sudo.

  I've already added the user  to group 'dialout' .

  Temporary I tried to change udev.rules (KERNEL==rfcomm[0-9]*, 
GROUP=dialout, MODE=666)  but this doesn't
  solve the problem so I removed it again.

  Here the commands I used :

  burki@orion:/$ hcitool scan
  Scanning ...
   00:12:6F:08:98:FFGEO LE-71 1

  burki@orion:/$ rfcomm connect 1 00:12:6F:08:98:FF
  Can't open RFCOMM device: Permission denied

  burki@orion:/$ ls -l /dev/rfcomm1
  ls: cannot access /dev/rfcomm1: No such file or directory

  burki@orion:/$ groups
  burki adm dialout fax cdrom floppy tape sudo audio dip video plugdev fuse 
scanner lpadmin netdev sambashare

  burki@orion:/$ sudo rfcomm connect 1 00:12:6F:08:98:FF
  Connected /dev/rfcomm1 to 00:12:6F:08:98:FF on channel 1
  Press CTRL-C for hangup

  In another terminal while connection is running ...

  burki@orion:/$ ls -l /dev/rfcomm1
  crw-rw 1 root dialout 216, 1 Jun 19 09:01 /dev/rfcomm1

  burki@orion:/$ UDEV_LOG=debug udevadm test $(udevadm info -q path -n rfcomm1)
  (I've stolen this command from another bug report #570692.  Output is very 
long. Please see attachment)

  WORKAROUND: sudo chmod u+s /usr/bin/rfcomm

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-25-generic-pae 3.2.0-25.40
  ProcVersionSignature: Ubuntu 3.2.0-25.40-generic-pae 3.2.18
  Uname: Linux 3.2.0-25-generic-pae i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  burki  1730 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xfe50 irq 56'
     Mixer name : 'Intel CougarPoint HDMI'
     Components : 'HDA:10ec0887,10438444,00100302 
HDA:80862805,80862805,0010'
     Controls  : 49
     Simple ctrls  : 21
  Date: Tue Jun 19 09:15:54 2012
  HibernationDevice: RESUME=UUID=f3e3a302-4042-4fcd-86c5-756ae88e15b8
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release i386 
(20120423)
  IwConfig:
   lono wireless extensions.

   eth0  no wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic-pae 
root=UUID=f791f2d4-8966-47d3-a19d-9b0b649e63ea ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-25-generic-pae N/A
   linux-backports-modules-3.2.0-25-generic-pae  N/A
   linux-firmware1.79
  RfKill:
   0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
  SourcePackage: linux
  StagingDrivers: mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/21/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0703
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: P8Z68-V LX
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0703:bd10/21/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP8Z68-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1014992/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1461986] Re: can't change usb_charge attribute in /sys/devices/platform/sony-laptop

Black, could you please test the latest upstream kernel available from
the very top line at the top of the page (the release names are
irrelevant for testing, and please do not test the daily folder)
following https://wiki.ubuntu.com/Kernel/MainlineBuilds ? It will allow
additional upstream developers to examine the issue.

If the test did not allow you to test to the issue (ex. you couldn't boot into 
the OS) please make a comment in your report about this, and continue to test 
the next most recent kernel version until you can test to the issue. Once 
you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this bug is fixed in the mainline kernel, please 
add the following tags by clicking on the yellow circle with a black pencil 
icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ

Where XY and Z are numbers corresponding to the kernel version.

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ

Please note, an error to install the kernel does not fit the criteria of
kernel-bug-exists-upstream.

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results.

Thank you for your understanding.

** Tags removed: bios-outdated-r0230da
** Tags added: latest-bios-r0230da

** Changed in: linux (Ubuntu)
   Importance: Low = Medium

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1461986

Title:
  can't change usb_charge attribute in /sys/devices/platform/sony-laptop

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I am on a Sony VAIO svf43142sn. My laptop has the ability to leave a USB port 
powered on even after shutdown to charge other devices. The value of 
/sys/devices/platform/sony-laptop/usb_charge is 1, but the USB port is not 
powered on. Also when I tried toggling it to 0 it resets back to 1 when I check 
again using cat. So I restarted the module sony-laptop with debug flags on. 
When I try:
  echo -n 0 | sudo tee -a /sys/devices/platform/sony-laptop/usb_charge

  these are the curresponding kernel logs, implying that it was a success:
  [ 9121.879908] sony_laptop: found handle 0x0155 (offset: 0x07)
  [ 9121.881386] sony_laptop: __call_snc_method: [SN07:0x0107]
  [ 9121.881394] sony_laptop: called SN07 with 0x0107 (result: 0x)

  But if I cat the value of usb charge, the change is not reflected, and I see 
this when I dmesg:
  [ 9346.202318] sony_laptop: found handle 0x0155 (offset: 0x07)
  [ 9346.202489] sony_laptop: __call_snc_method: [SN07:0x0007]
  [ 9346.202494] sony_laptop: called SN07 with 0x0007 (result: 0x0001)

  If it matters, when i simply echo 1, I will get this:
  [ 9879.675844] sony_laptop: found handle 0x0155 (offset: 0x07)
  [ 9879.676878] sony_laptop: __call_snc_method: [SN07:0x00010107]
  [ 9879.676885] sony_laptop: called SN07 with 0x10107 (result: 0x)

  The entire debug message when I restart the module(sony-laptop) is given 
here: http://paste.ubuntu.com/11551226/ . I have asked the same as a question 
on askubuntu.com. It has got a other information if you need it:
  
http://askubuntu.com/questions/628542/how-to-leave-a-usb-port-powered-during-shutdown-for-charging-mobile

  ---
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  dalton 1816 F pulseaudio
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=babf655a-816a-4c8a-ad03-6fe550cc1d60
  InstallationDate: Installed on 2015-05-28 (7 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  MachineType: Sony Corporation SVF14212SNW
  NonfreeKernelModules: wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic 
root=UUID=d52d966a-2fa0-4050-821e-99176a8fc013 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-38-generic N/A
   linux-backports-modules-3.16.0-38-generic  N/A
   linux-firmware 1.127.12
  Tags:  trusty
  Uname: Linux 3.16.0-38-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 11/18/2013
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: R0220DA
  dmi.board.asset.tag: N/A
  dmi.board.name: VAIO
  dmi.board.vendor: Sony Corporation
  dmi.board.version: N/A
  dmi.chassis.asset.tag: N/A
  dmi.chassis.type: 10

[Kernel-packages] [Bug 1461738] Re: iwl3945 on X61T crashes with Error sending C_POWER_TBL: time out after 500ms

Edward Z. Yang, could you please test the latest upstream kernel
available from the very top line at the top of the page (the release
names are irrelevant for testing, and please do not test the daily
folder) following https://wiki.ubuntu.com/Kernel/MainlineBuilds ? It
will allow additional upstream developers to examine the issue.

If the test did not allow you to test to the issue (ex. you couldn't boot into 
the OS) please make a comment in your report about this, and continue to test 
the next most recent kernel version until you can test to the issue. Once 
you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this bug is fixed in the mainline kernel, please 
add the following tags by clicking on the yellow circle with a black pencil 
icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ

Where XY and Z are numbers corresponding to the kernel version.

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ

Please note, an error to install the kernel does not fit the criteria of
kernel-bug-exists-upstream.

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results.

Thank you for your understanding.

** Tags removed: bios-outdated-1.25
** Tags added: latest-bios-1.25

** Changed in: linux (Ubuntu)
   Importance: Low = Medium

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1461738

Title:
  iwl3945 on X61T crashes with Error sending C_POWER_TBL: time out after
  500ms

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  After using wireless for some period of time, it stops working. dmesg
  report is attached. Rebooting the machine makes the wireless driver
  work again (for a little bit anyway). I haven't checked if it's
  related to suspend/resume, but I use this a lot. I can try bisecting
  for a kernel which doesn't have this problem, although between when I
  started having problems, I upgraded to Vivid (which didn't fix the
  problem.)

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-18-generic 3.19.0-18.18
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic x86_64
  NonfreeKernelModules: openafs
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC0D0p:   ezyang 3167 F...m pulseaudio
   /dev/snd/controlC0:  ezyang 3167 F pulseaudio
  Date: Wed Jun  3 20:09:04 2015
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=/dev/mapper/sabre-swap
  InstallationDate: Installed on 2013-11-21 (560 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  MachineType: LENOVO 7762K3U
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-18-generic 
root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-18-generic N/A
   linux-backports-modules-3.19.0-18-generic  N/A
   linux-firmware 1.143.1
  SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-05-29 (6 days ago)
  dmi.bios.date: 02/21/2008
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 7SET25WW (1.11 )
  dmi.board.name: 7762K3U
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr7SET25WW(1.11):bd02/21/2008:svnLENOVO:pn7762K3U:pvrThinkPadX61Tablet:rvnLENOVO:rn7762K3U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 7762K3U
  dmi.product.version: ThinkPad X61 Tablet
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461738/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

2015-06-07 Thread Gregor Plata

the solution described by Dev in comment #150 works for me without any drops or 
other serious issues but the wi-fi performance is only about 35%-40% of the 
performance on windows on the same machine downloading the same file from the 
same server .
Is there any chance (intention) to optimize the performance of the ath10k 
driver ?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1383184

Title:
  Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Card detail: Qualcomm Atheros Device [168c:003e] (rev 20)
  Subsystem: Bigfoot Networks, Inc. Device [1a56:1525]

  This is on a fully updated Ubuntu Server 14.04 installation, with the 
ubuntu-desktop environment installed. This happened in order to get the md raid 
drivers for raid0 on my system, as the desktop version doesn't support them.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  matanis2333 F pulseaudio
   /dev/snd/controlC0:  matanis2333 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6
  InstallationDate: Installed on 2014-10-16 (3 days ago)
  InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.3)
  IwConfig:
   p2p1  no wireless extensions.
   
   lono wireless extensions.
  MachineType: Micro-Star International Co., Ltd. GT72 2QE
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed 
root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.7
  RfKill:
   
  Tags:  trusty
  Uname: Linux 3.13.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/15/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1781IMS.10D
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1781
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:0.C
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: GT72 2QE
  dmi.product.version: REV:0.C
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462761] Missing required logs.

This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:

apport-collect 1462761

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462761

Title:
  Macbook Early 2015 TouchPad+Keyboard dont work at all

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Also has a wi-fi issue, which doesn't work as well

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462761/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1221995] Re: 0a12:0001 Bluetooth Dongle (Cambridge Silicon Radio, Ltd) doesn't work with 3.11 or 3.13 kernels

2015-06-07 Thread Thomas Becker

I can confirm this. I have:
3.19.0-15-generic kernel

and this device is down most of the time. But it was at one time up ...
dont know why :(

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1221995

Title:
  0a12:0001 Bluetooth Dongle (Cambridge Silicon Radio, Ltd) doesn't work
  with 3.11 or 3.13 kernels

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  SRU Justification:

  Impact: Bluetooth device stopped working. Device support regression.
  Fix: Upstream, f9f462faa02777f497eb25255683a94e0c054de6
  Testcase: Comment #10

  Original Description:

  Bluetooth device stopped working after upgrading ubuntu to 13.10.

  ~$ lsusb:
   Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth 
Dongle (HCI mode)

  ~$ hciconfig
  hci0: Type: BR/EDR  Bus: USB
   BD Address: 00:1B:10:00:0F:46  ACL MTU: 1017:8  SCO MTU: 64:0
   DOWN
   RX bytes:457 acl:0 sco:0 events:16 errors:0
   TX bytes:68 acl:0 sco:0 commands:16 errors:0
  ~$ hcitool dev
  Devices:

  device simply doesnt appear on bluetooth manager. blueman UI is
  broken.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jorge  1954 F pulseaudio
   /dev/snd/controlC0:  jorge  1954 F pulseaudio
  Date: Fri Sep  6 22:32:45 2013
  HibernationDevice: RESUME=UUID=707ce71f-40a6-4fc3-b0a1-d24329b1c781
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: MEGAWARE MW-H61M-2H
  MarkForUpload: True
  ProcFB:

  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=3480d68a-ee68-452e-b349-a2398ce3da52 ro quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  RfKill:
   0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-08-23 (15 days ago)
  dmi.bios.date: 08/28/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F5 MW
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MW-H61M-2H
  dmi.board.vendor: MEGAWARE
  dmi.board.version: v1.3 - 17/07/2012 - MWX
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MEGAWARE
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF5MW:bd08/28/2012:svnMEGAWARE:pnMW-H61M-2H:pvrv1.3-17/07/2012-MWX:rvnMEGAWARE:rnMW-H61M-2H:rvrv1.3-17/07/2012-MWX:cvnMEGAWARE:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: MW-H61M-2H
  dmi.product.version: v1.3 - 17/07/2012 - MWX
  dmi.sys.vendor: MEGAWARE

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1221995/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 778236] Re: bluetooth adapter not found after wakeup

2015-06-07 Thread Jairo Serrano

Also in Kubuntu 15.04 latest update

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/778236

Title:
  bluetooth adapter not found after wakeup

Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  Kubuntu 11.04 amd64
  Microstar GX623
  When laptop wakes up from sleep mode it cannot see the bluetooth adapter 
anymore and bluetooth mouse does not work.
  This worked with Kubuntu 9.04, 9.10, 10.10 and does not work after upgrade to 
11.04.
  After wake up the bluetooth adapter is on, when I do 'lsusb' I can see:
  ...
  Bus 007 Device 002: ID 0db0:a97a Micro Star International Bluetooth EDR Device
  ...
  but the graphic configurator tells No bluetooth adapter found.
  Bluetooth works well after normal boot.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/778236/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1400840] Re: package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade: trying to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz', which is different f

2015-06-07 Thread Joey Teo

delete the file by doing a find -name then reinstall.
On 07/06/2015 11:30 pm, Edel edelcustodiofr...@gmail.com wrote:

 Someone have fixed this kind of error? I have a few weeks with this
 problem and I'm losing my head, please help me.

 --
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1400840

 Title:
   package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade: trying
   to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz',
   which is different from other instances of package libasound2:amd64

 Status in alsa-lib package in Ubuntu:
   New

 Bug description:
   does not seem to be able to install properly as similar package exist
   of a different signature.

   ProblemType: Package
   DistroRelease: Ubuntu 14.04
   Package: libasound2 1.0.27.2-1ubuntu6
   ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
   Uname: Linux 3.13.0-32-generic x86_64
   ApportVersion: 2.14.1-0ubuntu3.2
   AptOrdering:
libasound2: Install
libasound2: Configure
libasound2: Configure
   Architecture: amd64
   Date: Wed Dec 10 03:46:06 2014
   Dependencies:
gcc-4.9-base 4.9-20140406-0ubuntu1
libasound2-data 1.0.27.2-3ubuntu7
libc6 2.19-0ubuntu6.3
libgcc1 1:4.9-20140406-0ubuntu1
multiarch-support 2.19-0ubuntu6
   DpkgHistoryLog:
Start-Date: 2014-12-10  03:45:20
Commandline: aptdaemon role='role-fix-broken-depends' sender=':1.87'
Upgrade: libasound2:amd64 (1.0.27.2-1ubuntu6, 1.0.27.2-3ubuntu7)
   DpkgTerminalLog:
Preparing to unpack .../libasound2_1.0.27.2-3ubuntu7_amd64.deb ...
Unpacking libasound2:amd64 (1.0.27.2-3ubuntu7) over (1.0.27.2-1ubuntu6)
 ...
dpkg: error processing archive
 /var/cache/apt/archives/libasound2_1.0.27.2-3ubuntu7_amd64.deb (--unpack):
 trying to overwrite shared
 '/usr/share/doc/libasound2/changelog.Debian.gz', which is different from
 other instances of package libasound2:amd64
   DuplicateSignature: package:libasound2:1.0.27.2-1ubuntu6:trying to
 overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz', which is
 different from other instances of package libasound2:amd64
   ErrorMessage: trying to overwrite shared
 '/usr/share/doc/libasound2/changelog.Debian.gz', which is different from
 other instances of package libasound2:amd64
   InstallationDate: Installed on 2013-08-31 (465 days ago)
   InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64
 (20130424)
   SourcePackage: alsa-lib
   Title: package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade:
 trying to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz',
 which is different from other instances of package libasound2:amd64
   UpgradeStatus: Upgraded to trusty on 2014-07-30 (131 days ago)

 To manage notifications about this bug go to:

 https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1400840/+subscriptions


-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to alsa-lib in Ubuntu.
https://bugs.launchpad.net/bugs/1400840

Title:
  package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade: trying
  to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz',
  which is different from other instances of package libasound2:amd64

Status in alsa-lib package in Ubuntu:
  New

Bug description:
  does not seem to be able to install properly as similar package exist
  of a different signature.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: libasound2 1.0.27.2-1ubuntu6
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.2
  AptOrdering:
   libasound2: Install
   libasound2: Configure
   libasound2: Configure
  Architecture: amd64
  Date: Wed Dec 10 03:46:06 2014
  Dependencies:
   gcc-4.9-base 4.9-20140406-0ubuntu1
   libasound2-data 1.0.27.2-3ubuntu7
   libc6 2.19-0ubuntu6.3
   libgcc1 1:4.9-20140406-0ubuntu1
   multiarch-support 2.19-0ubuntu6
  DpkgHistoryLog:
   Start-Date: 2014-12-10  03:45:20
   Commandline: aptdaemon role='role-fix-broken-depends' sender=':1.87'
   Upgrade: libasound2:amd64 (1.0.27.2-1ubuntu6, 1.0.27.2-3ubuntu7)
  DpkgTerminalLog:
   Preparing to unpack .../libasound2_1.0.27.2-3ubuntu7_amd64.deb ...
   Unpacking libasound2:amd64 (1.0.27.2-3ubuntu7) over (1.0.27.2-1ubuntu6) ...
   dpkg: error processing archive 
/var/cache/apt/archives/libasound2_1.0.27.2-3ubuntu7_amd64.deb (--unpack):
trying to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz', 
which is different from other instances of package libasound2:amd64
  DuplicateSignature: package:libasound2:1.0.27.2-1ubuntu6:trying to overwrite 
shared '/usr/share/doc/libasound2/changelog.Debian.gz', which is different from 
other instances of package libasound2:amd64
  ErrorMessage: trying to overwrite shared 
'/usr/share/doc/libasound2/changelog.Debian.gz', which is different from other 
instances of

[Kernel-packages] [Bug 1400840] Re: package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade: trying to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz', which is different from

2015-06-07 Thread Edel

Someone have fixed this kind of error? I have a few weeks with this
problem and I'm losing my head, please help me.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to alsa-lib in Ubuntu.
https://bugs.launchpad.net/bugs/1400840

Title:
  package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade: trying
  to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz',
  which is different from other instances of package libasound2:amd64

Status in alsa-lib package in Ubuntu:
  New

Bug description:
  does not seem to be able to install properly as similar package exist
  of a different signature.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: libasound2 1.0.27.2-1ubuntu6
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.2
  AptOrdering:
   libasound2: Install
   libasound2: Configure
   libasound2: Configure
  Architecture: amd64
  Date: Wed Dec 10 03:46:06 2014
  Dependencies:
   gcc-4.9-base 4.9-20140406-0ubuntu1
   libasound2-data 1.0.27.2-3ubuntu7
   libc6 2.19-0ubuntu6.3
   libgcc1 1:4.9-20140406-0ubuntu1
   multiarch-support 2.19-0ubuntu6
  DpkgHistoryLog:
   Start-Date: 2014-12-10  03:45:20
   Commandline: aptdaemon role='role-fix-broken-depends' sender=':1.87'
   Upgrade: libasound2:amd64 (1.0.27.2-1ubuntu6, 1.0.27.2-3ubuntu7)
  DpkgTerminalLog:
   Preparing to unpack .../libasound2_1.0.27.2-3ubuntu7_amd64.deb ...
   Unpacking libasound2:amd64 (1.0.27.2-3ubuntu7) over (1.0.27.2-1ubuntu6) ...
   dpkg: error processing archive 
/var/cache/apt/archives/libasound2_1.0.27.2-3ubuntu7_amd64.deb (--unpack):
trying to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz', 
which is different from other instances of package libasound2:amd64
  DuplicateSignature: package:libasound2:1.0.27.2-1ubuntu6:trying to overwrite 
shared '/usr/share/doc/libasound2/changelog.Debian.gz', which is different from 
other instances of package libasound2:amd64
  ErrorMessage: trying to overwrite shared 
'/usr/share/doc/libasound2/changelog.Debian.gz', which is different from other 
instances of package libasound2:amd64
  InstallationDate: Installed on 2013-08-31 (465 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  SourcePackage: alsa-lib
  Title: package libasound2 1.0.27.2-1ubuntu6 failed to install/upgrade: trying 
to overwrite shared '/usr/share/doc/libasound2/changelog.Debian.gz', which is 
different from other instances of package libasound2:amd64
  UpgradeStatus: Upgraded to trusty on 2014-07-30 (131 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1400840/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1245081] Re: macbook keyboard layout maps the tilde key to something else

2015-06-07 Thread Chris Cowan

I ran into this problem on a fresh install of Ubuntu 15.04 on a Macbook
Air. The echo 0  /sys/module/hid_apple/parameters/iso_layout
workaround worked for me.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1245081

Title:
  macbook keyboard layout maps the tilde key to something else

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  1. install ubuntu on Macbook Air 6,2
  2. press the key with the tilde ('~') written on it.
  3. see that is prints '§' instead.

  This is particularly annoying since the way to switch between windows uses 
the tilde.
  --- 
  ApportVersion: 2.12.5-0ubuntu2.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  kms1491 F pulseaudio
   /dev/snd/controlC1:  kms1491 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=9e7b2d0e-6a44-4ad7-9725-f9a3f5f39c33
  InstallationDate: Installed on 2013-10-25 (1 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64+mac 
(20131016.1)
  MachineType: Apple Inc. MacBookAir6,2
  MarkForUpload: True
  NonfreeKernelModules: wl
  Package: linux 3.11.0.12.13
  PackageArchitecture: amd64
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic 
root=UUID=079cbe6b-6488-4e57-85d3-c3e3e2fcbe40 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-12-generic N/A
   linux-backports-modules-3.11.0-12-generic  N/A
   linux-firmware 1.116
  Tags:  saucy
  Uname: Linux 3.11.0-12-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 07/12/2013
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: MBA61.88Z.0099.B01.1307121317
  dmi.board.asset.tag: Base Board Asset Tag#
  dmi.board.name: Mac-7DF21CB3ED6977E5
  dmi.board.vendor: Apple Inc.
  dmi.board.version: MacBookAir6,2
  dmi.chassis.type: 10
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version: Mac-7DF21CB3ED6977E5
  dmi.modalias: 
dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B01.1307121317:bd07/12/2013:svnAppleInc.:pnMacBookAir6,2:pvr1.0:rvnAppleInc.:rnMac-7DF21CB3ED6977E5:rvrMacBookAir6,2:cvnAppleInc.:ct10:cvrMac-7DF21CB3ED6977E5:
  dmi.product.name: MacBookAir6,2
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245081/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1439361] Re: USB to Ethernet adapter not working on USB 3 port but OK on USB 2 port

[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1439361

Title:
  USB to Ethernet adapter not working on USB 3 port but OK on USB 2 port

Status in linux package in Ubuntu:
  Expired

Bug description:
  Hello,

  my new laptop is a Dell XPS 11, with no ethernet port. So I bought an
  USB to Ethernet adapter. It also has two more USB 3 ports. When
  connected on my laptop, I'm unable to acquire an IP through my DHCP,
  but a new network interface is automatically raised. I tried to set
  manually an IP, but I cannot ping any system which normally honors
  ping requests. The surprising point is that when I connect the same
  adapter on an old laptop (Dell E4300), running the same version of
  Ubuntu 14.04 (both systems are fully up-to-date), it perfectly works !
  The only difference I can see is that my old laptop has only USB 2
  ports...

  Additionally, the USB hub works on both computers, and I connected the 
adapter to 2 desktop computers :
  - one with an additional USB 3 card : it works ;
  - one with embedded USB 3 port : same error as with the modern laptop.

  So it really seems to be a problem related to the way USB 3 is handled
  by Ubuntu 14.04, but perhaps only with some specific chipsets. I
  cannot find what chipset is on the mainboard of my laptop (it is an
  Intel one, for sure, since the CPU is a Core i5-4210Y), but my desktop
  PC as an Intel Z97 chipset.

  Here is what I read tailing kern.log when connecting the adapter. Note the 
errors near the end :
  Apr  1 21:00:57 XPS11 kernel: [ 1360.356635] usb 2-1: new high-speed USB 
device number 5 using xhci_hcd
  Apr  1 21:00:57 XPS11 kernel: [ 1360.385156] usb 2-1: New USB device found, 
idVendor=05e3, idProduct=0610
  Apr  1 21:00:57 XPS11 kernel: [ 1360.385165] usb 2-1: New USB device strings: 
Mfr=1, Product=2, SerialNumber=0
  Apr  1 21:00:57 XPS11 kernel: [ 1360.385170] usb 2-1: Product: USB2.0 Hub
  Apr  1 21:00:57 XPS11 kernel: [ 1360.385174] usb 2-1: Manufacturer: 
GenesysLogic
  Apr  1 21:00:57 XPS11 kernel: [ 1360.386453] hub 2-1:1.0: USB hub found
  Apr  1 21:00:57 XPS11 kernel: [ 1360.387717] hub 2-1:1.0: 4 ports detected
  Apr  1 21:00:57 XPS11 kernel: [ 1360.508766] usb 3-1: new SuperSpeed USB 
device number 2 using xhci_hcd
  Apr  1 21:00:57 XPS11 kernel: [ 1360.528979] usb 3-1: New USB device found, 
idVendor=05e3, idProduct=0616
  Apr  1 21:00:57 XPS11 kernel: [ 1360.528993] usb 3-1: New USB device strings: 
Mfr=1, Product=2, SerialNumber=0
  Apr  1 21:00:57 XPS11 kernel: [ 1360.528999] usb 3-1: Product: USB3.0 Hub
  Apr  1 21:00:57 XPS11 kernel: [ 1360.529005] usb 3-1: Manufacturer: 
GenesysLogic
  Apr  1 21:00:57 XPS11 kernel: [ 1360.532085] hub 3-1:1.0: USB hub found
  Apr  1 21:00:57 XPS11 kernel: [ 1360.532498] hub 3-1:1.0: 4 ports detected
  Apr  1 21:00:58 XPS11 kernel: [ 1360.805848] usb 3-1.1: new SuperSpeed USB 
device number 3 using xhci_hcd
  Apr  1 21:00:58 XPS11 kernel: [ 1360.821076] usb 3-1.1: New USB device found, 
idVendor=0bda, idProduct=8153
  Apr  1 21:00:58 XPS11 kernel: [ 1360.821088] usb 3-1.1: New USB device 
strings: Mfr=1, Product=2, SerialNumber=6
  Apr  1 21:00:58 XPS11 kernel: [ 1360.821094] usb 3-1.1: Product: USB 
10/100/1000 LAN
  Apr  1 21:00:58 XPS11 kernel: [ 1360.821099] usb 3-1.1: Manufacturer: Realtek
  Apr  1 21:00:58 XPS11 kernel: [ 1360.821104] usb 3-1.1: SerialNumber: 
0100
  Apr  1 21:01:03 XPS11 kernel: [ 1365.846558] usb 3-1.1: Disable of 
device-initiated U1 failed.
  Apr  1 21:01:03 XPS11 kernel: [ 1365.850638] usb 3-1.1: Disable of 
device-initiated U2 failed.
  Apr  1 21:01:03 XPS11 kernel: [ 1365.854180] usb 3-1.1: Set SEL for 
device-initiated U1 failed.
  Apr  1 21:01:03 XPS11 kernel: [ 1365.857613] usb 3-1.1: Set SEL for 
device-initiated U2 failed.
  Apr  1 21:01:03 XPS11 kernel: [ 1365.857682] usbcore: registered new 
interface driver cdc_ether
  Apr  1 21:01:03 XPS11 kernel: [ 1365.865825] xhci_hcd :00:14.0: URB 
transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
  Apr  1 21:01:03 XPS11 kernel: [ 1365.887328] usb 3-1.1: Set SEL for 
device-initiated U1 failed.
  Apr  1 21:01:03 XPS11 kernel: [ 1365.890841] usb 3-1.1: Set SEL for 
device-initiated U2 failed.
  Apr  1 21:01:03 XPS11 kernel: [ 1365.890862] r815x: probe of 3-1.1:2.0 failed 
with error -71
  Apr  1 21:01:03 XPS11 kernel: [ 1365.890922] usbcore: registered new 
interface driver r815x

  uname -ar output :
  Linux XPS11 3.13.0-48-generic #80-Ubuntu SMP Thu Mar 12 11:16:15 UTC 2015 
x86_64 x86_64 x86_64 GNU/Linux

  On my old laptop, here is the kern.log relevant parts :
  Apr  1 21:24:13 stilgar-e4300 kernel: [11988.964194] usb 2-4: new high-speed 
USB device number 8 using ehci-pci
  Apr  1 21:24:13 stilgar-e4300 kernel:

[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

2015-06-07 Thread Ming

Hey, I figured out my problem. Turns out that some of the header files
and code were broken (had a padlock on the icon) or were missing
altogether. I made new copies of the file with the same code and
formatting. After that, there were no problems running the command: make
-jX

@Jane Doe, Isaiah: 
I found this thread that may address your concern. I originally had to answer 
the questions as well. But I ran the command

make olddefconfig

before running

make -jX.

Here's the thread in which your problem may be addressed. (Note, I used the 
second post)
http://serverfault.com/questions/116299/automatically-answer-defaults-when-doing-make-oldconfig-on-a-kernel-tree

My wireless card is working now. Thanks everyone.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1383184

Title:
  Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Card detail: Qualcomm Atheros Device [168c:003e] (rev 20)
  Subsystem: Bigfoot Networks, Inc. Device [1a56:1525]

  This is on a fully updated Ubuntu Server 14.04 installation, with the 
ubuntu-desktop environment installed. This happened in order to get the md raid 
drivers for raid0 on my system, as the desktop version doesn't support them.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  matanis2333 F pulseaudio
   /dev/snd/controlC0:  matanis2333 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6
  InstallationDate: Installed on 2014-10-16 (3 days ago)
  InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.3)
  IwConfig:
   p2p1  no wireless extensions.
   
   lono wireless extensions.
  MachineType: Micro-Star International Co., Ltd. GT72 2QE
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed 
root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.7
  RfKill:
   
  Tags:  trusty
  Uname: Linux 3.13.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/15/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1781IMS.10D
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1781
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:0.C
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: GT72 2QE
  dmi.product.version: REV:0.C
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462822] Re: Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

2015-06-07 Thread Doug Smythies

** Description changed:

  There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
- I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work. 
+ I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work.
  I think that, in general, we want dmidecode to work.
  
  I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
  and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
  (And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)
  
  Is there a reason to have it not set?
  
  On IRC apw asked me to enter this bug report and to assign it to him.
  
- By the way, I compiled 4.1RC6 with CONFIG_DEVMEM=y and now dmidecode
- works fine.
+ By the way, I compiled 4.1RC6 changing from #CONFIG_DEVMEM is not set
+ to CONFIG_DEVMEM=y myself and now dmidecode works fine.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462822

Title:
  Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
  I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work.
  I think that, in general, we want dmidecode to work.

  I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
  and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
  (And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)

  Is there a reason to have it not set?

  On IRC apw asked me to enter this bug report and to assign it to him.

  By the way, I compiled 4.1RC6 changing from #CONFIG_DEVMEM is not
  set to CONFIG_DEVMEM=y myself and now dmidecode works fine.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462822/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

2015-06-07 Thread Isaiah Fuller

I'm having the same issue as #151.
Followed the directions in #150, I don't know what I've done wrong.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1383184

Title:
  Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Card detail: Qualcomm Atheros Device [168c:003e] (rev 20)
  Subsystem: Bigfoot Networks, Inc. Device [1a56:1525]

  This is on a fully updated Ubuntu Server 14.04 installation, with the 
ubuntu-desktop environment installed. This happened in order to get the md raid 
drivers for raid0 on my system, as the desktop version doesn't support them.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  matanis2333 F pulseaudio
   /dev/snd/controlC0:  matanis2333 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6
  InstallationDate: Installed on 2014-10-16 (3 days ago)
  InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.3)
  IwConfig:
   p2p1  no wireless extensions.
   
   lono wireless extensions.
  MachineType: Micro-Star International Co., Ltd. GT72 2QE
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed 
root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.7
  RfKill:
   
  Tags:  trusty
  Uname: Linux 3.13.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/15/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1781IMS.10D
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1781
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:0.C
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: GT72 2QE
  dmi.product.version: REV:0.C
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462822] Re: Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462822

Title:
  Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
  I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work. 
  I think that, in general, we want dmidecode to work.

  I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
  and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
  (And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)

  Is there a reason to have it not set?

  On IRC apw asked me to enter this bug report and to assign it to him.

  By the way, I compiled 4.1RC6 with CONFIG_DEVMEM=y and now dmidecode
  works fine.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462822/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1441657] Re: Waking from hibernation results in kernel panic

2015-06-07 Thread Enkouyami

I've tried v4.4 and v4.5 and the problem doesn't happen from waking from
sleep, but it still happens on waking from hibernation.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1441657

Title:
  Waking from hibernation results in kernel panic

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  The majority of the time when I hibernate my computer and then start
  it up again, it has a kernel panic.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-37-generic 3.13.0-37.64
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  Uname: Linux 3.13.0-37-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ely2371 F pulseaudio
   /dev/snd/controlC0:  ely2371 F pulseaudio
  CurrentDesktop: X-Cinnamon
  Date: Wed Apr  8 10:21:25 2015
  HibernationDevice: RESUME=UUID=db907587-bbc0-43fe-92a4-5d8c2acce879
  InstallationDate: Installed on 2014-12-07 (122 days ago)
  InstallationMedia: Linux Mint 17.1 Rebecca - Release amd64 20141126
  MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic 
root=/dev/mapper/Linux-LinuxMint ro quiet splash resume=/dev/Linux/Swap
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.11
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 12/19/2014
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.34
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 227F
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 77.35
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.34:bd12/19/2014:svnHewlett-Packard:pnHPPavilion17NotebookPC:pvr097510405F1620180:rvnHewlett-Packard:rn227F:rvr77.35:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion 17 Notebook PC
  dmi.product.version: 097510405F1620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1441657/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1454253] ProcEnviron.txt

apport information

** Attachment added: ProcEnviron.txt
   
https://bugs.launchpad.net/bugs/1454253/+attachment/4411325/+files/ProcEnviron.txt

** Changed in: linux (Ubuntu)
   Status: Incomplete = New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1454253

Title:
  external usb breaks suspend

Status in linux package in Ubuntu:
  New

Bug description:
  After booting xubuntu 15.04 it's possible to suspend it the normal way
  BUT - only until you've plugged external usb hard drive. After that
  (even if it was unmounted and removed) it becomes impossible: the
  system goes to suspend briefly (for bout 1 second) but immediately
  wakes up for no apparent reason.

  I suspect there's some weird bug in xfce power management - is there a way to 
disable it alltogether and  rely on systemd directly instead?
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1454253/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1452165] Re: currupted btrfs breaks both recovery and boot

If you know a way to reliably get btrfs corupted than you can test it
yourself on dedicated VM.

** Changed in: linux (Ubuntu)
   Status: Incomplete = New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1452165

Title:
  currupted btrfs breaks both recovery and boot

Status in linux package in Ubuntu:
  New

Bug description:
  If btrfs volume is corrupted (separate /home partition, not even /
  !!!) than not only booting ubuntu in normal AND recovery mode is
  impossible but even liveusb fails as well. The recovery drops to shell
  but it's impossible to fix btrfs - there's unkillable mount -t
  btrfs... process hanging and kernel regularly pukes with btrfs-
  transacti blocked for 120 seconds message.

  This is beyond horrible - the whole purpose of recovery mode is to fix
  errors like that, errors on partition which is not used to boot from
  (e. g. /home) should never ever break it. Alternatively you could add
  new mode to grub menu - smth like recovery which actually works or
  something like that.

  The workaround is to add 'break=premount' to grub command line and fix
  btrfs with 'btrfs check --repair /dev/dm-' from initramfs.

  Found on xubuntu 15.04 x86_64.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1452165/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1454253] Re: external usb breaks suspend

I've run apport-collect twice already - what exactly are you missing?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1454253

Title:
  external usb breaks suspend

Status in linux package in Ubuntu:
  New

Bug description:
  After booting xubuntu 15.04 it's possible to suspend it the normal way
  BUT - only until you've plugged external usb hard drive. After that
  (even if it was unmounted and removed) it becomes impossible: the
  system goes to suspend briefly (for bout 1 second) but immediately
  wakes up for no apparent reason.

  I suspect there's some weird bug in xfce power management - is there a way to 
disable it alltogether and  rely on systemd directly instead?
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1454253/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462822] [NEW] Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

2015-06-07 Thread Doug Smythies

Public bug reported:

There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work. 
I think that, in general, we want dmidecode to work.

I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
(And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)

Is there a reason to have it not set?

On IRC apw asked me to enter this bug report and to assign it to him.

By the way, I compiled 4.1RC6 with CONFIG_DEVMEM=y and now dmidecode
works fine.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Assignee: Andy Whitcroft (apw)
 Status: Incomplete

** Changed in: linux (Ubuntu)
 Assignee: (unassigned) = Andy Whitcroft (apw)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462822

Title:
  Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
  I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work. 
  I think that, in general, we want dmidecode to work.

  I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
  and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
  (And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)

  Is there a reason to have it not set?

  On IRC apw asked me to enter this bug report and to assign it to him.

  By the way, I compiled 4.1RC6 with CONFIG_DEVMEM=y and now dmidecode
  works fine.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462822/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462822] Missing required logs.

This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:

apport-collect 1462822

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462822

Title:
  Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
  I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work. 
  I think that, in general, we want dmidecode to work.

  I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
  and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
  (And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)

  Is there a reason to have it not set?

  On IRC apw asked me to enter this bug report and to assign it to him.

  By the way, I compiled 4.1RC6 with CONFIG_DEVMEM=y and now dmidecode
  works fine.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462822/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1454253] Re: external usb breaks suspend

apport information

** Description changed:

  After booting xubuntu 15.04 it's possible to suspend it the normal way
  BUT - only until you've plugged external usb hard drive. After that
  (even if it was unmounted and removed) it becomes impossible: the system
  goes to suspend briefly (for bout 1 second) but immediately wakes up for
  no apparent reason.
  
  I suspect there's some weird bug in xfce power management - is there a way to 
disable it alltogether and  rely on systemd directly instead?
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True
+ --- 
+ ApportVersion: 2.17.2-0ubuntu1.1
+ Architecture: amd64
+ CurrentDesktop: XFCE
+ DistroRelease: Ubuntu 15.04
+ EcryptfsInUse: Yes
+ Package: linux (not installed)
+ Tags:  vivid
+ Uname: Linux 4.1.0-040100rc6-generic x86_64
+ UnreportableReason: The running kernel is not an Ubuntu kernel
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
+ _MarkForUpload: True

** Attachment added: JournalErrors.txt
   
https://bugs.launchpad.net/bugs/1454253/+attachment/4411324/+files/JournalErrors.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1454253

Title:
  external usb breaks suspend

Status in linux package in Ubuntu:
  New

Bug description:
  After booting xubuntu 15.04 it's possible to suspend it the normal way
  BUT - only until you've plugged external usb hard drive. After that
  (even if it was unmounted and removed) it becomes impossible: the
  system goes to suspend briefly (for bout 1 second) but immediately
  wakes up for no apparent reason.

  I suspect there's some weird bug in xfce power management - is there a way to 
disable it alltogether and  rely on systemd directly instead?
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1454253/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1219379] Re: i386/amd64 conflict, preventing multiarch installation of SDL2_mixer

2015-06-07 Thread djcj

Why is this still not fixed?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to libmodplug in Ubuntu.
https://bugs.launchpad.net/bugs/1219379

Title:
  i386/amd64 conflict, preventing multiarch installation of SDL2_mixer

Status in libmodplug package in Ubuntu:
  Confirmed

Bug description:
  Description:  Ubuntu Saucy Salamander (development branch)
  Release:  13.10

  libmodplug1:
Installed: (none)
Candidate: 1:0.8.8.4-3
Version table:
   1:0.8.8.4-3 0
  500 http://archive.ubuntu.com/ubuntu/ saucy/universe amd64 Package

  Problem:

  apt-get install SDL2_mixer-2.0-0:i386 SDL2_mixer-2.0-0:amd64

  Fails as the dependencies libmodplug1:i386 and libmodplug:x86_64
  conflict.

  Both arch's install libmodplug to /usr/lib/libmodplug.so.1 (and other
  overlapping files)

  Tested under a debootstrap install of Saucy Salamander.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libmodplug/+bug/1219379/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1460985] Re: periodic find task slow ubuntu to death

The most likely culprit is /etc/cron.daily/man-db


** Changed in: linux (Ubuntu)
   Status: Incomplete = New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1460985

Title:
  periodic find task slow ubuntu to death

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Periodically something starts 'find' program in the background with
  readdir smth in options and it slows down ubuntu to the point the
  music and video got hiccups, mouse lags etc. I suspect it's smth
  related to package or locatedb updates but can't pinpoint the culprit
  yet.

  Anyway, the bugis in slowdown - background tasks should never-ever
  affect the interactive programs running by user. Ideally they should
  be started in dedicated, heavily policed systemd slice.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1460985/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1462822] Re: Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

2015-06-07 Thread Doug Smythies

You do not need the apport stuff for this bug report, it is not
relevant.

** Changed in: linux (Ubuntu)
   Status: Incomplete = New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1462822

Title:
  Kernel configuration parameter CONFIG_DEVMEM is not set, it should be

Status in linux package in Ubuntu:
  New

Bug description:
  There is a relatively new kernel configuration parameter, CONFIG_DEVMEM.
  I do not understand why, but for some reason is not set for Ubuntu, and 
therefore dmidecode does not work. 
  I think that, in general, we want dmidecode to work.

  I found this: 
https://lists.ubuntu.com/archives/kernel-team/2015-May/057250.html,
  and so had expected it to be set to yes by now, but in Kernel 4.1RC6 it still 
isn't.
  (And yes, I am talking mainline kernels here, which I know are not supported, 
but I am just trying to help.)

  Is there a reason to have it not set?

  On IRC apw asked me to enter this bug report and to assign it to him.

  By the way, I compiled 4.1RC6 with CONFIG_DEVMEM=y and now dmidecode
  works fine.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462822/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1442311] Re: Ubuntu 14.04 blank screen after wakeup from sleep

2015-06-07 Thread Kenneth Bogert

I finally found some time to work on this, and I think I have it fixed.

Debugging gnome-shell when I hit this bug (note, I could also trigger
this bug by allowing the screen to lock, no suspend necessary) I noticed
the following backtrace kept happening:

Thread 1 (Thread 0x7f920ec68a40 (LWP 12089)):
#0  0x7f920b9f912d in poll () at ../sysdeps/unix/syscall-template.S:81
#1  0x7f9202b8ab72 in poll (__timeout=-1, __nfds=1, __fds=0x7fff76528300) 
at /usr/include/x86_64-linux-gnu/bits/poll2.h:46
#2  _xcb_conn_wait (c=c@entry=0x7f9ed0, cond=cond@entry=0x7fff76528420, 
vector=vector@entry=0x0, count=count@entry=0x0) at ../../src/xcb_conn.c:447
#3  0x7f9202b8c3ff in wait_for_reply (c=c@entry=0x7f9ed0, request=29601, 
e=e@entry=0x0) at ../../src/xcb_in.c:490
#4  0x7f9202b8c512 in xcb_wait_for_reply (c=0x7f9ed0, request=29601, e=0x0) 
at ../../src/xcb_in.c:520
#5  0x7f91f8e4b4ce in dri2WaitForMSC (pdraw=0xca4900, target_msc=0, 
divisor=2, remainder=0, ust=0x7fff76528550, msc=0x7fff76528558, 
sbc=0x7fff76528560) at ../../../../src/glx/dri2_glx.c:480
#6  0x7f92090478f6 in _cogl_winsys_wait_for_vblank 
(onscreen=onscreen@entry=0xca12e0) at ./winsys/cogl-winsys-glx.c:1606
#7  0x7f9209048016 in _cogl_winsys_onscreen_swap_region (onscreen=0xca12e0, 
user_rectangles=optimized out, n_rectangles=optimized out) at 
./winsys/cogl-winsys-glx.c:1808
#8  0x7f920903d341 in cogl_onscreen_swap_region (onscreen=0xca12e0, 
rectangles=rectangles@entry=0x7fff76528700, n_rectangles=n_rectangles@entry=1) 
at ./cogl-onscreen.c:337
#9  0x7f920ce13662 in clutter_stage_cogl_redraw (stage_window=0x855b80) at 
./cogl/clutter-stage-cogl.c:641
#10 0x7f920ce77887 in clutter_stage_do_redraw (stage=0xd11bf0) at 
./clutter-stage.c:1184
#11 _clutter_stage_do_update (stage=0xd11bf0) at ./clutter-stage.c:1242
#12 0x7f920ce5e028 in master_clock_update_stages (master_clock=0xbe7880, 
stages=0x35dca30) at ./clutter-master-clock.c:457
#13 clutter_clock_dispatch (source=optimized out, callback=optimized out, 
user_data=optimized out) at ./clutter-master-clock.c:589
#14 0x7f920c13ee04 in g_main_dispatch (context=0x7d35f0) at 
/build/buildd/glib2.0-2.40.2/./glib/gmain.c:3064
#15 g_main_context_dispatch (context=context@entry=0x7d35f0) at 
/build/buildd/glib2.0-2.40.2/./glib/gmain.c:3663
#16 0x7f920c13f048 in g_main_context_iterate (context=0x7d35f0, 
block=block@entry=1, dispatch=dispatch@entry=1, self=optimized out) at 
/build/buildd/glib2.0-2.40.2/./glib/gmain.c:3734
#17 0x7f920c13f30a in g_main_loop_run (loop=0x7d3390) at 
/build/buildd/glib2.0-2.40.2/./glib/gmain.c:3928
#18 0x7f920d883021 in meta_run () at core/main.c:556
#19 0x00401d11 in main (argc=1, argv=0x7fff76528b08) at main.c:439


Specifically frame #6, it appeared to be endlessly waiting for a vblank.  So I 
added the following to /etc/environment:

export CLUTTER_VBLANK=none

I have just done suspend and resume 20 times without issue, whereas
previously I could trigger this bug after 3 or 4 on average.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1442311

Title:
  Ubuntu 14.04 blank screen after wakeup from sleep

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Possibly related to bug 1283938 . I have disabled lock screen on
  suspend to try and get around the bug but it obviously hasn't worked.

  I see a completely black screen with a working mouse cursor.  Used
  Ctrl-Alt-F2 to login at a text terminal and tried to kill gnome-
  settings-daemon and gnome-shell (doing so has randomly made it work in
  the past).  The gnome-shell process would not kill and I got segfault
  dmesg errors which are attached.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: gnome-shell 3.10.4-0ubuntu5.2
  ProcVersionSignature: Ubuntu 3.16.0-33.44~14.04.1-generic 3.16.7-ckt7
  Uname: Linux 3.16.0-33-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.8
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Thu Apr  9 14:31:20 2015
  DisplayManager: gdm
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-05-24 (319 days ago)
  InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release amd64+mac 
(20140204)
  SourcePackage: gnome-shell
  UpgradeStatus: Upgraded to trusty on 2014-09-21 (200 days ago)
  --- 
  ApportVersion: 2.14.1-0ubuntu3.8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  kbogert2487 F pulseaudio
   /dev/snd/controlC1:  kbogert2487 F pulseaudio
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 14.04
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=41830e03-5386-43ed-88b8-1c77dd33df98
  InstallationDate: Installed on 2014-05-24 (320 days ago)
  InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release amd64+mac 
(20140204)
  MachineType: Dell Inc. Studio XPS 1640
  Package: linux (not installed)
  ProcFB: 0

[Kernel-packages] [Bug 1283938] Re: [Samsung NP535U4X-S01TH] Ubuntu 14.04 blank screen after wakeup from sleep

2015-06-07 Thread Kenneth Bogert

For me the fix was to add:

export CLUTTER_VBLANK=none

to /etc/environment

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1283938

Title:
  [Samsung NP535U4X-S01TH] Ubuntu 14.04 blank screen after wakeup from
  sleep

Status in The Linux Kernel:
  Unknown
Status in linux package in Ubuntu:
  Incomplete

Bug description:
  HOW TO REPRODUCE

  1. Suspend the device
  2. Wake it up

  EXPECTED BEHAVIOUR

  - The device to resume normally

  REAL BEHAVIOUR

  - The screen goes blank

  RELEVANT DETAILS

  - In the /etc/default/grub file; changing quiet splash option to
  nomodeset allows the wakeup, but the computer gets so slow it is
  unusable.

  WORKAROUND: Install fglrx.

  Unverified WORKAROUND: Revert commit
  6c7bccea390853bdec5b76fe31fc50f3b36f75d5 as per
  https://bugzilla.kernel.org/show_bug.cgi?id=76761#c3 .

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xserver-xorg-video-ati 1:7.3.0-1ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-11.31-generic 3.13.3
  Uname: Linux 3.13.0-11-generic x86_64
  .tmp.unity.support.test.0:

  ApportVersion: 2.13.2-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Mon Feb 24 12:58:07 2014
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus: virtualbox, 4.3.6, 3.13.0-11-generic, x86_64: installed
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7500G] [1002:990a] 
(prog-if 00 [VGA controller])
     Subsystem: Samsung Electronics Co Ltd Device [144d:c660]
   Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7550M/7570M/7650M] 
[1002:6841] (rev ff) (prog-if ff)
  InstallationDate: Installed on 2014-02-22 (1 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140218)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 535U4C
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-11-generic 
root=UUID=9f8c7e92-a6ea-41fd-9489-a256c8b9f5d5 ro quiet splash vt.handoff=7
  SourcePackage: xserver-xorg-video-ati
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/03/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P06RAF.N93.130403.LEO
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: NP535U4X-S01TH
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: SEC_SW_REVISION_1234567890ABCD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP06RAF.N93.130403.LEO:bd04/03/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn535U4C:pvrP06RAF:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP535U4X-S01TH:rvrSEC_SW_REVISION_1234567890ABCD:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A:
  dmi.product.name: 535U4C
  dmi.product.version: P06RAF
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.
  version.compiz: compiz 1:0.9.11+14.04.20140218-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0~rc1-1ubuntu4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0~rc1-1ubuntu4
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Mon Feb 24 12:54:54 2014
  xserver.configfile: default
  xserver.errors: RADEON(G0): [XvMC] Failed to initialize extension.
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.15.0-1ubuntu6
  xserver.video_driver: radeon

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1283938/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1460985] Missing required logs.

This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:

apport-collect 1460985

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1460985

Title:
  periodic find task slow ubuntu to death

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Periodically something starts 'find' program in the background with
  readdir smth in options and it slows down ubuntu to the point the
  music and video got hiccups, mouse lags etc. I suspect it's smth
  related to package or locatedb updates but can't pinpoint the culprit
  yet.

  Anyway, the bugis in slowdown - background tasks should never-ever
  affect the interactive programs running by user. Ideally they should
  be started in dedicated, heavily policed systemd slice.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1460985/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1454253] Missing required logs.

This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:

apport-collect 1454253

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1454253

Title:
  external usb breaks suspend

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  After booting xubuntu 15.04 it's possible to suspend it the normal way
  BUT - only until you've plugged external usb hard drive. After that
  (even if it was unmounted and removed) it becomes impossible: the
  system goes to suspend briefly (for bout 1 second) but immediately
  wakes up for no apparent reason.

  I suspect there's some weird bug in xfce power management - is there a way to 
disable it alltogether and  rely on systemd directly instead?
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 15.04
  EcryptfsInUse: Yes
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse kismet libvirtd 
lpadmin netdev plugdev sambashare scanner sudo tape video wireshark
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1454253/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1452165] Missing required logs.