[Kernel-packages] [Bug 1893624] Re: Ryzen 4800u, kernel 5.8.5 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)
[6.146732] [drm:mod_hdcp_add_display_to_topology [amdgpu]] *ERROR* Failed to add display topology, DTM TA is not initialized. I'm also seeing this error on 5.8.0-19-generic kernel. It's ThinkPad T14 gen1 device with 4750u CPU/GPU with HDMI display connected to the USB-C dock. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1893624 Title: Ryzen 4800u, kernel 5.8.5 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth) Status in linux package in Ubuntu: Invalid Bug description: Lenovo Ideapad S540 13ARE (AMD Ryzen 4800U). Ubuntu Budgie 20.04.1 LTS, updated kernel to 5.8.5. Secure Boot disabled. Clean install with entire disk (Windows came preinstalled) wiped out. Most things work just fine. If not for the errors shown during boot, I would not have noticed the issues.Video (native resolutions works), audio, wifi, suspend, the quick buttons (brightness, volume etc) all work fine. However during boot, errors are shortly shown: asterix@Idefix:~$ sudo dmesg -l err [3.204455] pci :00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. [4.901524] I2C multi instantiate pseudo device driver INT3515:00: IRQ index 1 not found [4.919327] snd_pci_acp3x :03:00.5: Invalid ACP audio mode : 0 [4.939476] ACPI Error: No handler for Region [ECSI] (bf2d92b9) [EmbeddedControl] (20200528/evregion-127) [4.939724] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200528/exfldio-261) [4.939929] ACPI Error: Aborting method \_SB.UBTC.ECRD due to previous error (AE_NOT_EXIST) (20200528/psparse-529) [4.940212] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_NOT_EXIST) (20200528/psparse-529) [4.940517] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 2 [5.235689] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517 [6.273068] [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link! [6.273591] [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link! [6.273748] [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find connector for link! [7.036019] [drm:mod_hdcp_add_display_to_topology [amdgpu]] *ERROR* Failed to add display topology, DTM TA is not initialized. [7.891436] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)``` lspci-vnvn.log: https://pastebin.com/Kygie8nu What can I do to help solve this? Note I am not a developer and a Linux novice. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: Budgie:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-08-30 (0 days ago) InstallationMedia: Ubuntu-Budgie 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) Package: linux (not installed) Tags: focal Uname: Linux 5.8.5-050805-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip input lpadmin lxd plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1893624/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1683577] Re: QCA9377 WIFI does not work
With 4.11rc7 kernel: 1) Ubuntu boots with wifi in "device not ready" status. 2) Restarting network-manager recovers both adapters. 3) After sleep/wakeup cycle, both wifi adapters enters "device not ready" again. I reported the same problem is filed at upstream: https://bugzilla.kernel.org/show_bug.cgi?id=195463 ** Bug watch added: Linux Kernel Bug Tracker #195463 http://bugzilla.kernel.org/195463 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734]
[Kernel-packages] [Bug 1683577] Re: QCA9377 WIFI does not work
Comments on the latest apport info: System boots into 4.11rc7 kernel. After boot, both QCA9377 and USB WIFI are detected by network-manager but both are "device not ready" status. No wifi connections. ** Attachment added: "dmesg log with 4.11rc7 kernel" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1683577/+attachment/4864790/+files/t2.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured;
[Kernel-packages] [Bug 1683577] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864787/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should
[Kernel-packages] [Bug 1683577] Re: QCA9377 WIFI does not work
apport information ** Description changed: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network- manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [ 79.876633] ath: doing EEPROM country->regdmn map search [ 79.876633] ath: country maps to regdmn code: 0x3a [ 79.876634] ath: Country alpha2 being used: US [ 79.876634] ath: Regpair used: 0x3a [ 79.876635] ath: regdomain 0x8348 dynamically updated by country IE [ 624.156177] ath10k_pci :02:00.0: firmware crashed!
[Kernel-packages] [Bug 1683577] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864788/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] Re: QCA9377 WIFI does not work
More info on the system log: At 12.xx secs, system boots into desktop with wifi automatically connected and works find. At 118, 145,225 seconds, three attempts are made to re-connect to the same wifi ssid. First two are successful. The wifi adapter disappears from the network-manager after the third. At 330 seconds ethernet cable is connected to submit the system log. After the system log is sent, at 880 seconds after boot, a USB 802.11/b/g/n adapter was connected and detected by kernel but does not show up in network-manager: 869.724515] usb 1-4: new high-speed USB device number 4 using xhci_hcd [ 869.882786] usb 1-4: New USB device found, idVendor=148f, idProduct=3070 [ 869.882793] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 869.882798] usb 1-4: Product: 802.11 n WLAN [ 869.882802] usb 1-4: Manufacturer: Ralink [ 869.882806] usb 1-4: SerialNumber: 1.0 [ 870.024988] usb 1-4: reset high-speed USB device number 4 using xhci_hcd [ 870.176022] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 870.188292] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected [ 870.189040] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 870.190525] usbcore: registered new interface driver rt2800usb [ 870.203530] rt2800usb 1-4:1.0 wlxe84e0604557e: renamed from wlan0 [ 870.231315] IPv6: ADDRCONF(NETDEV_UP): wlxe84e0604557e: link is not ready [ 870.231355] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 870.235687] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 870.623403] IPv6: ADDRCONF(NETDEV_UP): wlxe84e0604557e: link is not ready [ 871.048160] IPv6: ADDRCONF(NETDEV_UP): wlxe84e0604557e: link is not ready -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code:
[Kernel-packages] [Bug 1683577] Re: QCA9377 WIFI does not work
Hi,Joseph, This installation of 17.04 is an upgrade from 16.10. I did not use 16.10 as much as I'm using 17.04 now so I can not confirm the WIFI drops out equally as frequently as 17.04 during regular usage. However I confirm that 16.10 has the same problem that wifi disappears from network-manager after a suspend/wakeup cycle. At that time I have not tried restarting network-manager but had to reboot if I needed wifi after sleep/wakeup. That did not affect me much then because I used wired network and bluetooth most of the time then. Dehuan -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no
[Kernel-packages] [Bug 1683577] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864768/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864769/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864754/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864755/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864762/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864760/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code
[Kernel-packages] [Bug 1683577] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864748/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] JournalErrors.txt
apport information ** Attachment added: "JournalErrors.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864746/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a
[Kernel-packages] [Bug 1683577] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864751/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a
[Kernel-packages] [Bug 1683577] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864758/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864771/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864767/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864745/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code
[Kernel-packages] [Bug 1683577] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864766/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a
[Kernel-packages] [Bug 1683577] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864756/+files/WifiSyslog.txt ** Description changed: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network- manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [ 79.876633] ath: doing EEPROM country->regdmn map search [ 79.876633] ath: country maps to regdmn code: 0x3a [ 79.876634] ath: Country alpha2 being used: US [ 79.876634] ath: Regpair used: 0x3a [
[Kernel-packages] [Bug 1683577] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864747/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] AlsaInfo.txt
apport information ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864757/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code
[Kernel-packages] [Bug 1683577] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864764/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should
[Kernel-packages] [Bug 1683577] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864763/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864749/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should
[Kernel-packages] [Bug 1683577] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864750/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864752/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864765/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864770/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864759/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a
[Kernel-packages] [Bug 1683577] JournalErrors.txt
apport information ** Attachment added: "JournalErrors.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864761/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a
[Kernel-packages] [Bug 1683577] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864753/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country
[Kernel-packages] [Bug 1683577] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864743/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [
[Kernel-packages] [Bug 1683577] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1683577/+attachment/4864744/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1683577 Title: QCA9377 WIFI does not work Status in linux package in Ubuntu: Incomplete Bug description: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network-manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a
[Kernel-packages] [Bug 1683577] Re: QCA9377 WIFI does not work
apport information ** Tags added: apport-collected zesty ** Description changed: My laptop, acer E5-575-53EJ, sometimes boots without wifi connection being detected. Restarting the network-manager sometimes fixes the problem. dmesg | grep ath shows the kernel log. The system finishes booting at 12.x seconds with no wifi connections. Network-manager is restarted around 3x seconds and connection is established around 78.x seconds. Then firmware crashed at 624 seconds, followed by a successful recovery. At 915.x seconds a suspend is attempted, followed by a restart of network-manager scheduled by systemd. Connect was lost. Launching Wicd network manager recovers the connection, but the network- manager shows nothing. Ubuntu: 17.04, kernel: 4.10.0-19-generic Firmware: I tired the qca firmware at https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0 . all three files have the same md5 as the one installed by default. Hardware: 02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) [0.177594] pci :02:00.0: [168c:0042] type 00 class 0x028000 [0.177626] pci :02:00.0: reg 0x10: [mem 0xb100-0xb11f 64bit] [0.177800] pci :02:00.0: PME# supported from D0 D3hot D3cold [0.177871] pci :02:00.0: System wakeup disabled by ACPI Additional info: When this laptop was running 1.23 bios, linux has reported repeated PCIE errors. I upgraded bios to 1.25 and PCIE errors are gone, however wifi does not improve. [1.917547] ath10k_pci :02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [2.196931] ath10k_pci :02:00.0: Direct firmware load for ath10k/pre-cal-pci-:02:00.0.bin failed with error -2 [2.196945] ath10k_pci :02:00.0: Direct firmware load for ath10k/cal-pci-:02:00.0.bin failed with error -2 [2.198777] ath10k_pci :02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [2.198779] ath10k_pci :02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [2.199128] ath10k_pci :02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 [2.264639] ath10k_pci :02:00.0: board_file api 2 bmi_id N/A crc32 93da0176 [4.066350] ath10k_pci :02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [4.071835] ath: EEPROM regdomain: 0x69 [4.071835] ath: EEPROM indicates we should expect a direct regpair map [4.071837] ath: Country alpha2 being used: 00 [4.071837] ath: Regpair used: 0x69 [4.076946] ath10k_pci :02:00.0 wlp2s0: renamed from wlan0 [8.562060] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 12.760910] ath: EEPROM regdomain: 0x8348 [ 12.760911] ath: EEPROM indicates we should expect a country code [ 12.760912] ath: doing EEPROM country->regdmn map search [ 12.760913] ath: country maps to regdmn code: 0x3a [ 12.760914] ath: Country alpha2 being used: US [ 12.760914] ath: Regpair used: 0x3a [ 12.760915] ath: regdomain 0x8348 dynamically updated by country IE [ 22.051491] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052023] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.052471] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.092738] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 22.195128] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 32.478247] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 39.400234] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.115130] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 50.577978] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.781520] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 55.884352] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 63.402603] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.063646] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 68.526311] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.300734] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 76.557875] ath10k_pci :02:00.0: no channel configured; ignoring frame(s)! [ 79.876632] ath: EEPROM regdomain: 0x8348 [ 79.876632] ath: EEPROM indicates we should expect a country code [ 79.876633] ath: doing EEPROM country->regdmn map search [ 79.876633] ath: country maps to regdmn code: 0x3a [ 79.876634] ath: Country alpha2 being used: US [ 79.876634] ath: Regpair used: 0x3a [ 79.876635] ath: regdomain 0x8348 dynamically updated by country IE [ 624.156177]
