[Kernel-packages] [Bug 2034033] Re: Ubuntu 22.04 update to 6.2.0-31 kernel version breaks mount.cifs to vers=1.0 server cifs_mount failed w/return code = -5
Ubuntu has release kernel version "6.2.0-32-generic #32~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug 18 10:40:13 UTC 2 x86_64 x86_64 x86_64 GNU/Linux" which has successfully resolved this defect case. One of the Samba maintainers told me I should check if SMB 1.0 protocol was purposely removed from the Ubuntu 6.2.0-31 kernel version. This evening I received that changelog, and could not see a hint of it being removed by Ubuntu on purpose. Then my system notified me of a yet newer kernel package. I pulled it down, and was happy to see it has successfully resolved this defect. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-signed-hwe-6.2 in Ubuntu. https://bugs.launchpad.net/bugs/2034033 Title: Ubuntu 22.04 update to 6.2.0-31 kernel version breaks mount.cifs to vers=1.0 server cifs_mount failed w/return code = -5 Status in linux-signed-hwe-6.2 package in Ubuntu: New Bug description: My Xubuntu system this weekend alerted me to a new kernel update being available. The following versions are the existing/working version: linux-image-6.2.0-26-generic 6.2.0-26.26~22.04.1 And the updated/not working version: linux-image-6.2.0-31-generic 6.2.0-31.31~22.04.1 And yes I run my system with: linux-image-generic-hwe-22.04 6.2.0.31.31~22.04.8 Booted to the 6.2.0-31 kernel version, attempting to do a mount.cifs operation to our Samba NT4 PDC, results in the following output into syslog: Sep 4 08:03:24 jaakob kernel: [ 107.703886] FS-Cache: Loaded Sep 4 08:03:24 jaakob kernel: [ 107.824160] Key type cifs.spnego registered Sep 4 08:03:24 jaakob kernel: [ 107.824169] Key type cifs.idmap registered Sep 4 08:03:24 jaakob kernel: [ 107.824454] Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers Sep 4 08:03:24 jaakob kernel: [ 107.824454] Sep 4 08:03:24 jaakob kernel: [ 107.824457] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers Sep 4 08:03:24 jaakob kernel: [ 107.824460] CIFS: Attempting to mount \\ldslnx01\data Sep 4 08:03:24 jaakob kernel: [ 107.859554] CIFS: VFS: cifs_mount failed w/return code = -5 And none of the Samba mounts will establish. Booting back to the prior 6.2.0-26 kernel version, Samba mounts work just fine. I use the following switches to the mount.cifs command in order to establish connections to our Samba NT4 PDC: "-o credentials=/home/mdlueck/.smbcredentials,uid=mdlueck,gid=mdlueck,dir_mode=0777,file_mode=0666,nobrl,vers=1.0" That last vers= option was the last that needed to be added to continue making use of our Samba NT4 style PDC. Since it is a version upgrade of only the kernel, not Samba package, I would not think that yet another switch to mount.cifs was needed in order to continue connecting successfully. So did the latest Kernel update suddenly break Samba's mount.cifs vers=1.0 support? Nothing gets logged to our Samba server for the failed mount attempt. Booting for not back to the working 6.2.0-26 kernel version. Please kindly advise. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-6.2/+bug/2034033/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2034033] [NEW] Ubuntu 22.04 update to 6.2.0-31 kernel version breaks mount.cifs to vers=1.0 server cifs_mount failed w/return code = -5
Public bug reported: My Xubuntu system this weekend alerted me to a new kernel update being available. The following versions are the existing/working version: linux-image-6.2.0-26-generic 6.2.0-26.26~22.04.1 And the updated/not working version: linux-image-6.2.0-31-generic 6.2.0-31.31~22.04.1 And yes I run my system with: linux-image-generic-hwe-22.04 6.2.0.31.31~22.04.8 Booted to the 6.2.0-31 kernel version, attempting to do a mount.cifs operation to our Samba NT4 PDC, results in the following output into syslog: Sep 4 08:03:24 jaakob kernel: [ 107.703886] FS-Cache: Loaded Sep 4 08:03:24 jaakob kernel: [ 107.824160] Key type cifs.spnego registered Sep 4 08:03:24 jaakob kernel: [ 107.824169] Key type cifs.idmap registered Sep 4 08:03:24 jaakob kernel: [ 107.824454] Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers Sep 4 08:03:24 jaakob kernel: [ 107.824454] Sep 4 08:03:24 jaakob kernel: [ 107.824457] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers Sep 4 08:03:24 jaakob kernel: [ 107.824460] CIFS: Attempting to mount \\ldslnx01\data Sep 4 08:03:24 jaakob kernel: [ 107.859554] CIFS: VFS: cifs_mount failed w/return code = -5 And none of the Samba mounts will establish. Booting back to the prior 6.2.0-26 kernel version, Samba mounts work just fine. I use the following switches to the mount.cifs command in order to establish connections to our Samba NT4 PDC: "-o credentials=/home/mdlueck/.smbcredentials,uid=mdlueck,gid=mdlueck,dir_mode=0777,file_mode=0666,nobrl,vers=1.0" That last vers= option was the last that needed to be added to continue making use of our Samba NT4 style PDC. Since it is a version upgrade of only the kernel, not Samba package, I would not think that yet another switch to mount.cifs was needed in order to continue connecting successfully. So did the latest Kernel update suddenly break Samba's mount.cifs vers=1.0 support? Nothing gets logged to our Samba server for the failed mount attempt. Booting for not back to the working 6.2.0-26 kernel version. Please kindly advise. ** Affects: linux-signed-hwe-6.2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-signed-hwe-6.2 in Ubuntu. https://bugs.launchpad.net/bugs/2034033 Title: Ubuntu 22.04 update to 6.2.0-31 kernel version breaks mount.cifs to vers=1.0 server cifs_mount failed w/return code = -5 Status in linux-signed-hwe-6.2 package in Ubuntu: New Bug description: My Xubuntu system this weekend alerted me to a new kernel update being available. The following versions are the existing/working version: linux-image-6.2.0-26-generic 6.2.0-26.26~22.04.1 And the updated/not working version: linux-image-6.2.0-31-generic 6.2.0-31.31~22.04.1 And yes I run my system with: linux-image-generic-hwe-22.04 6.2.0.31.31~22.04.8 Booted to the 6.2.0-31 kernel version, attempting to do a mount.cifs operation to our Samba NT4 PDC, results in the following output into syslog: Sep 4 08:03:24 jaakob kernel: [ 107.703886] FS-Cache: Loaded Sep 4 08:03:24 jaakob kernel: [ 107.824160] Key type cifs.spnego registered Sep 4 08:03:24 jaakob kernel: [ 107.824169] Key type cifs.idmap registered Sep 4 08:03:24 jaakob kernel: [ 107.824454] Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers Sep 4 08:03:24 jaakob kernel: [ 107.824454] Sep 4 08:03:24 jaakob kernel: [ 107.824457] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers Sep 4 08:03:24 jaakob kernel: [ 107.824460] CIFS: Attempting to mount \\ldslnx01\data Sep 4 08:03:24 jaakob kernel: [ 107.859554] CIFS: VFS: cifs_mount failed w/return code = -5 And none of the Samba mounts will establish. Booting back to the prior 6.2.0-26 kernel version, Samba mounts work just fine. I use the following switches to the mount.cifs command in order to establish connections to our Samba NT4 PDC: "-o credentials=/home/mdlueck/.smbcredentials,uid=mdlueck,gid=mdlueck,dir_mode=0777,file_mode=0666,nobrl,vers=1.0" That last vers= option was the last that needed to be added to continue making use of our Samba NT4 style PDC. Since it is a version upgrade of only the kernel, not Samba package, I would not think that yet another switch to mount.cifs was needed in order to continue connecting successfully. So did the latest Kernel update suddenly break Samba's mount.cifs vers=1.0 support? Nothing gets logged to our Samba server for the failed mount attempt. Booting for not back to the working 6.2.0-26 kernel version. Please kindly
[Kernel-packages] [Bug 1938645] Re: Ubuntu 20.04.2 getting kernel I/O errors connecting to Sony Walkman over USB using MTP protocol
The solution to this issue was documented in my #3 comment. The misleading error messages coming from Linux were indicating that it was time to fresh reformat the MP3 player and start over. Once done, no issues. This defect report may be close. Thank you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1938645 Title: Ubuntu 20.04.2 getting kernel I/O errors connecting to Sony Walkman over USB using MTP protocol Status in linux package in Ubuntu: Incomplete Bug description: I use package Rhythembox as my MP3 player software. I also use Rhythebox to transfer audio to my Sony WalkMan MP3 player. Since moving to Xubuntu 20.04.2, it has gotten much harder to successfully transfer mp3 audio to the Sony WalkMan MP3 player. I checked in syslog... I see some errors I believe are related: Aug 1 10:39:54 jaakob kernel: [ 8079.675644] mtp[10045]: segfault at 8a ip 7f2754d6f623 sp 7f274cbb2f20 error 4 in libglib-2.0.so.0.6400.6[7f2754d1b000+84000] Aug 1 10:39:54 jaakob kernel: [ 8079.675648] Code: 0f 1f 80 00 00 00 00 48 c1 e8 04 4c 8b 3b 8d 48 ff 48 89 c5 49 89 ce 49 c1 e6 04 4d 01 f7 4d 8b 27 4d 85 e4 0f 84 cd 00 00 00 <49> 8b 44 24 08 48 85 c0 74 43 48 8b 10 49 89 54 24 08 49 89 c4 49 Aug 1 10:40:13 jaakob kernel: [ 8098.630114] usb 1-11.2: USB disconnect, device number 6 Aug 1 10:41:34 jaakob kernel: [ 8179.600470] usb 1-5: new high-speed USB device number 8 using xhci_hcd Aug 1 10:41:34 jaakob kernel: [ 8179.749115] usb 1-5: New USB device found, idVendor=054c, idProduct=0385, bcdDevice= 0.01 Aug 1 10:41:34 jaakob kernel: [ 8179.749121] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 Aug 1 10:41:34 jaakob kernel: [ 8179.749124] usb 1-5: Product: WALKMAN Aug 1 10:41:34 jaakob kernel: [ 8179.749127] usb 1-5: Manufacturer: Sony Aug 1 10:41:34 jaakob kernel: [ 8179.749130] usb 1-5: SerialNumber: 10FA1355316092 Aug 1 10:41:34 jaakob kernel: [ 8179.750689] usb-storage 1-5:1.0: USB Mass Storage device detected Aug 1 10:41:34 jaakob kernel: [ 8179.751175] scsi host14: usb-storage 1-5:1.0 Aug 1 10:41:35 jaakob kernel: [ 8180.761332] scsi 14:0:0:0: Direct-Access SONY WALKMAN 1.00 PQ: 0 ANSI: 4 Aug 1 10:41:35 jaakob kernel: [ 8180.761875] sd 14:0:0:0: Attached scsi generic sg3 type 0 Aug 1 10:41:35 jaakob kernel: [ 8180.762889] sd 14:0:0:0: [sdb] 1917952 2048-byte logical blocks: (3.93 GB/3.66 GiB) Aug 1 10:41:35 jaakob kernel: [ 8180.763062] sd 14:0:0:0: [sdb] Write Protect is off Aug 1 10:41:35 jaakob kernel: [ 8180.763066] sd 14:0:0:0: [sdb] Mode Sense: 3e 00 00 00 Aug 1 10:41:35 jaakob kernel: [ 8180.763200] sd 14:0:0:0: [sdb] No Caching mode page found Aug 1 10:41:35 jaakob kernel: [ 8180.763206] sd 14:0:0:0: [sdb] Assuming drive cache: write through Aug 1 10:41:36 jaakob kernel: [ 8180.809779] sdb: sdb1 Aug 1 10:41:36 jaakob kernel: [ 8180.811198] sd 14:0:0:0: [sdb] Attached SCSI removable disk Aug 1 10:41:36 jaakob Thunar[7060]: Working directory "/home/mdlueck/[Invalid UTF-8]" does not exist. It won't be used when spawning "exo-open".Working directory "/home/mdlueck/[Invalid UTF-8]" does not exist. It won't be used when spawning "exo-open". Aug 1 10:41:36 jaakob Thunar[10184]: thunar-volman: Unknown block device type "disk". Aug 1 10:41:42 jaakob kernel: [ 8186.793656] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Aug 1 10:41:42 jaakob systemd[1]: Created slice system-clean\x2dmount\x2dpoint.slice. Aug 1 10:41:42 jaakob systemd[1]: Finished Clean the /media/mdlueck/WALKMAN mount point. Aug 1 10:41:42 jaakob udisksd[813]: Mounted /dev/sdb1 at /media/mdlueck/WALKMAN on behalf of uid 1000 Aug 1 10:41:42 jaakob dbus-daemon[1546]: [session uid=1000 pid=1546] Activating service name='org.freedesktop.thumbnails.Thumbnailer1' requested by ':1.83' (uid=1000 pid=7060 comm="/usr/bin/Thunar --daemon " label="unconfined") Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer atril-thumbnailer -s %s %u %o Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer gnome-thumbnail-font --size %s %u %o Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o Aug 1 10:41:42 jaakob dbus-daemon[1546]: [session uid=1000 pid=1546] Successfully activated service 'org.freedesktop.thumbnails.Thumbnailer1' Aug 1 10:43:07 jaakob kernel: [ 8272.638815] blk_update_request: I/O error, dev sdb, sector 32 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 Aug 1 10:43:07 jaakob kernel: [ 8272.638818] Buffer I/O
[Kernel-packages] [Bug 1938645] Re: Ubuntu 20.04.2 getting kernel I/O errors connecting to Sony Walkman over USB using MTP protocol
I decided to have the Sony WalkMan reformat itself. MTP over USB working much better now. Very odd that I could play MP3 recordings with the player without issues... only issues was removing files, copying new files to it. The thing that tipped me off to try reformatting the device with itself is I was seeing traces of recordings I had deleted yet in the playlist. Some of the letters in the listings were missing, but the content would still play properly. That told me deletes were not being completed properly. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1938645 Title: Ubuntu 20.04.2 getting kernel I/O errors connecting to Sony Walkman over USB using MTP protocol Status in linux package in Ubuntu: New Bug description: I use package Rhythembox as my MP3 player software. I also use Rhythebox to transfer audio to my Sony WalkMan MP3 player. Since moving to Xubuntu 20.04.2, it has gotten much harder to successfully transfer mp3 audio to the Sony WalkMan MP3 player. I checked in syslog... I see some errors I believe are related: Aug 1 10:39:54 jaakob kernel: [ 8079.675644] mtp[10045]: segfault at 8a ip 7f2754d6f623 sp 7f274cbb2f20 error 4 in libglib-2.0.so.0.6400.6[7f2754d1b000+84000] Aug 1 10:39:54 jaakob kernel: [ 8079.675648] Code: 0f 1f 80 00 00 00 00 48 c1 e8 04 4c 8b 3b 8d 48 ff 48 89 c5 49 89 ce 49 c1 e6 04 4d 01 f7 4d 8b 27 4d 85 e4 0f 84 cd 00 00 00 <49> 8b 44 24 08 48 85 c0 74 43 48 8b 10 49 89 54 24 08 49 89 c4 49 Aug 1 10:40:13 jaakob kernel: [ 8098.630114] usb 1-11.2: USB disconnect, device number 6 Aug 1 10:41:34 jaakob kernel: [ 8179.600470] usb 1-5: new high-speed USB device number 8 using xhci_hcd Aug 1 10:41:34 jaakob kernel: [ 8179.749115] usb 1-5: New USB device found, idVendor=054c, idProduct=0385, bcdDevice= 0.01 Aug 1 10:41:34 jaakob kernel: [ 8179.749121] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 Aug 1 10:41:34 jaakob kernel: [ 8179.749124] usb 1-5: Product: WALKMAN Aug 1 10:41:34 jaakob kernel: [ 8179.749127] usb 1-5: Manufacturer: Sony Aug 1 10:41:34 jaakob kernel: [ 8179.749130] usb 1-5: SerialNumber: 10FA1355316092 Aug 1 10:41:34 jaakob kernel: [ 8179.750689] usb-storage 1-5:1.0: USB Mass Storage device detected Aug 1 10:41:34 jaakob kernel: [ 8179.751175] scsi host14: usb-storage 1-5:1.0 Aug 1 10:41:35 jaakob kernel: [ 8180.761332] scsi 14:0:0:0: Direct-Access SONY WALKMAN 1.00 PQ: 0 ANSI: 4 Aug 1 10:41:35 jaakob kernel: [ 8180.761875] sd 14:0:0:0: Attached scsi generic sg3 type 0 Aug 1 10:41:35 jaakob kernel: [ 8180.762889] sd 14:0:0:0: [sdb] 1917952 2048-byte logical blocks: (3.93 GB/3.66 GiB) Aug 1 10:41:35 jaakob kernel: [ 8180.763062] sd 14:0:0:0: [sdb] Write Protect is off Aug 1 10:41:35 jaakob kernel: [ 8180.763066] sd 14:0:0:0: [sdb] Mode Sense: 3e 00 00 00 Aug 1 10:41:35 jaakob kernel: [ 8180.763200] sd 14:0:0:0: [sdb] No Caching mode page found Aug 1 10:41:35 jaakob kernel: [ 8180.763206] sd 14:0:0:0: [sdb] Assuming drive cache: write through Aug 1 10:41:36 jaakob kernel: [ 8180.809779] sdb: sdb1 Aug 1 10:41:36 jaakob kernel: [ 8180.811198] sd 14:0:0:0: [sdb] Attached SCSI removable disk Aug 1 10:41:36 jaakob Thunar[7060]: Working directory "/home/mdlueck/[Invalid UTF-8]" does not exist. It won't be used when spawning "exo-open".Working directory "/home/mdlueck/[Invalid UTF-8]" does not exist. It won't be used when spawning "exo-open". Aug 1 10:41:36 jaakob Thunar[10184]: thunar-volman: Unknown block device type "disk". Aug 1 10:41:42 jaakob kernel: [ 8186.793656] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Aug 1 10:41:42 jaakob systemd[1]: Created slice system-clean\x2dmount\x2dpoint.slice. Aug 1 10:41:42 jaakob systemd[1]: Finished Clean the /media/mdlueck/WALKMAN mount point. Aug 1 10:41:42 jaakob udisksd[813]: Mounted /dev/sdb1 at /media/mdlueck/WALKMAN on behalf of uid 1000 Aug 1 10:41:42 jaakob dbus-daemon[1546]: [session uid=1000 pid=1546] Activating service name='org.freedesktop.thumbnails.Thumbnailer1' requested by ':1.83' (uid=1000 pid=7060 comm="/usr/bin/Thunar --daemon " label="unconfined") Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer atril-thumbnailer -s %s %u %o Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer gnome-thumbnail-font --size %s %u %o Aug 1 10:41:42 jaakob org.freedesktop.thumbnails.Thumbnailer1[10238]: Registered thumbnailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o Aug 1 10:41:42 jaakob dbus-daemon[1546]: [session uid=1000 pid=1546] Successfully activated
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
I just tested a Xubuntu 14.04 x64 LTS upgrade to Xubuntu 16.04. The value: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" is correct for Xubuntu. That is what causes the boot process to have the GUI screen rather than text console messages. So note to the upgrade package maintainers... it needs to be smart enough to detect/differentiate between Ubuntu Server vs Ubuntu LTS upgrades and select the correct value. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Incomplete Status in release-upgrader-apt package in Ubuntu: New Status in linux source package in Xenial: Incomplete Status in release-upgrader-apt source package in Xenial: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
@Joseph, Do you mean incomplete based on this bug report needing to morph into an issue against the 14.04 to 16.04 LTS upgrade process? How may I assist? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Incomplete Status in linux source package in Xenial: Incomplete Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
We have now built brand new servers with Ubuntu Server 16.04 x64. The initial state of the /etc/default/grub file is: GRUB_CMDLINE_LINUX_DEFAULT="" Must be that edit was missed in the LTS upgrade from 14.04 to 16.04. I have modified our LTS upgraded 16.04 servers to this setting. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Excellent find, Joseph! Here are the lines of interest from our /etc/default/grub files: GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` #GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX_DEFAULT="quiet" GRUB_CMDLINE_LINUX="" So we had value: "quiet splash" I tried your suggested value: "" That worked, not quite the old user experience, however. I tried value: "splash" to see if that would bring back the "Ubuntu " start-up splash screen. Nadda. I next moved to value: "quiet" That at least shows IPL progress, and successfully lands at TTY1 login screen. We will run with this new setting for now. So question, was it intentional to no longer have "Ubuntu " IPL 'splash screen' during which Esc may be pressed to see the actual IPL steps on the server console? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Correct, 3.13.0-9.29 boots with appropriate "Ubuntu " text, then lands at a busybox type interface. So looks like something happened bad in-between there. Purged back off. Ready for the next test. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Looks like build 3.15.0-0.1 still has the issue. It also would not boot correctly... landed the server at a busybox type interface. Purged back off. So, into the 3.14's next? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Build 3.16.0-0.1 has the reported defect. Purged back off. Next build to evaluate, please... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
There does not appear to be i386 files in that directory. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Build 3.16.0-23 has the reported defect. Purged back off. Next build to evaluate, please... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Yes that v3.13.0-108.155 kernel build boots up with the expected Ubuntu splashscreen. Though would not boot up all the way cleanly... went into busybox. Received v4.4.0-62 via Xenial updates, so purging off both the v3.13.0-108.155 and v4.4.0-59 kernel versions. So yes, somewhere between 3.13 and 3.19 appears to be where the damage was done. Perhaps do a build of 3.16ish to begin a binary search method? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
The 3.19.0-80 kernel build still has the defect. I purged it back off our server. Booted back to 4.4.0-59. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Sorry... defect is yet persisting with the 4.2.0-16.19 kernel build. I purged it back off our server. Booted back to 4.4.0-59. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Tested 4.2.0-19.23 kernel, same issue. Purging it off. So, quick question... between "v4.4-wily" which worked and "linux- image-4.4.0-1-generic", is the difference there the Ubuntu customizations applied to the official Kernel build? Thus is something in how Ubuntu customizes the Kernel source which is causing this issue? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Same defect with both the https://launchpad.net/~canonical-kernel- team/+archive/ubuntu/ppa/+build/11923303 and https://launchpad.net/ubuntu/+source/linux/4.3.0-7.18 kernel builds. I am back booted to linux-image-4.4.0-59-generic and all other kernels have been purged back off the server. Please advise what you need me to test next. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
... and I was not suppose to be booting from a lower entry than the top entry for the particular kernel build I am testing, was I? Top has no suffix text, next one I believe was labeled "Upstart" and third was "Recovery". -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Wowsers... this bug is already present in linux-image-4.4.0-1-generic! So was linux-image-4.4.0-1-generic the very next version after v4.4-wily? Or do I need to test some additional versions? The URL link you posted for the Yakkey(16.10) kernel leads directly to amd64 specific... this system is running the i386 kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Noted you want me to test the Yakkey(16.10) kernel specified. About the Xenial kernels... I am thinking to walk the version list back from 4.4.0-59 to land on one that does not have the error. Then post the last one that was working, and the first one with the noted defect. Does that sound like a plan to you, Joseph? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
OK, I got the first kernel (v4.4-wily) validated that it works properly. I IPL'ed back to the 4.4.0-59 to validate the problem had not suddenly vanished, still there. So: 4.4.0-59 bad / has the issue v4.4-wily working / no issue Do you still need me to install / test / validate the v4.5-rc1-wily kernel, in this case? I am thinking to stay booted to the v4.4-wily kernel for now. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Excellent, first try lucky. I downloaded all three requested kernel packages. Started with the: 4.5 final: http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/ And this version already corrects the entire issue seen with the 4.4.0-59-generic official 16.04 version. Here is the console output from applying it: mdlueck@ldslnx01:/srv/shares/data/Download/OpenSource/Ubuntu/Xenial/Bugs/1656605_ServerNoConsoleDisplay/v4.5-wily$ sudo dpkg -i linux-image-4.5.0-040500-generic_4.5.0-040500.201603140130_i386.deb Selecting previously unselected package linux-image-4.5.0-040500-generic. (Reading database ... 59100 files and directories currently installed.) Preparing to unpack linux-image-4.5.0-040500-generic_4.5.0-040500.201603140130_i386.deb ... Done. Unpacking linux-image-4.5.0-040500-generic (4.5.0-040500.201603140130) ... Setting up linux-image-4.5.0-040500-generic (4.5.0-040500.201603140130) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.5.0-040500-generic /boot/vmlinuz-4.5.0-040500-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.5.0-040500-generic /boot/vmlinuz-4.5.0-040500-generic update-initramfs: Generating /boot/initrd.img-4.5.0-040500-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 4.5.0-040500-generic /boot/vmlinuz-4.5.0-040500-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.5.0-040500-generic /boot/vmlinuz-4.5.0-040500-generic Generating grub configuration file ... Found linux image: /boot/vmlinuz-4.10.0-041000rc4-generic Found initrd image: /boot/initrd.img-4.10.0-041000rc4-generic Found linux image: /boot/vmlinuz-4.5.0-040500-generic Found initrd image: /boot/initrd.img-4.5.0-040500-generic Found linux image: /boot/vmlinuz-4.4.0-59-generic Found initrd image: /boot/initrd.img-4.4.0-59-generic Found memtest86+ image: /memtest86+.elf Found memtest86+ image: /memtest86+.bin done I will stay booted to this kernel version. Please let me know if I may be of further assistance. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: In Progress Status in linux source package in Xenial: In Progress Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Question: So is there hope of getting this fixed in the default kernel version for the 16.04 release, or is it going to be addressed only with the "Ubuntu 16.04.2 LTS Point Release Coming On Feb 2 With Linux Kernel 4.8" newer kernel? No... Linux Kernel 4.4 vs Linux Kernel 4.10, so that is not Linux Kernel 4.8 either. Anyway, do you need any further input from me? And can this be resolved with the Linux Kernel 4.4 version? I would rather not have to apply a hardware compatibility kernel to be able to run Ubuntu 16.04 on server hardware from 2009. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Confirmed Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Confirmed Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Yes, working perfectly! Trying to remember how I set tags. Here is the output of applying the test kernel: mdlueck@ldslnx01:/srv/shares/data/Download/OpenSource/Ubuntu/Xenial/Bugs/1656605_ServerNoConsoleDisplay/v4.10-rc4$ sudo dpkg -i linux-image-4.10.0-041000rc4-generic_4.10.0-041000rc4.201701152031_i386.deb [sudo] password for mdlueck: Selecting previously unselected package linux-image-4.10.0-041000rc4-generic. (Reading database ... 57910 files and directories currently installed.) Preparing to unpack linux-image-4.10.0-041000rc4-generic_4.10.0-041000rc4.201701152031_i386.deb ... Done. Unpacking linux-image-4.10.0-041000rc4-generic (4.10.0-041000rc4.201701152031) ... Setting up linux-image-4.10.0-041000rc4-generic (4.10.0-041000rc4.201701152031) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.10.0-041000rc4-generic /boot/vmlinuz-4.10.0-041000rc4-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.10.0-041000rc4-generic /boot/vmlinuz-4.10.0-041000rc4-generic update-initramfs: Generating /boot/initrd.img-4.10.0-041000rc4-generic W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1_01.bin for module i915 W: Possible missing firmware /lib/firmware/i915/kbl_guc_ver9_14.bin for module i915 W: Possible missing firmware /lib/firmware/i915/bxt_guc_ver8_7.bin for module i915 run-parts: executing /etc/kernel/postinst.d/update-notifier 4.10.0-041000rc4-generic /boot/vmlinuz-4.10.0-041000rc4-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.10.0-041000rc4-generic /boot/vmlinuz-4.10.0-041000rc4-generic Generating grub configuration file ... Found linux image: /boot/vmlinuz-4.10.0-041000rc4-generic Found initrd image: /boot/initrd.img-4.10.0-041000rc4-generic Found linux image: /boot/vmlinuz-4.4.0-59-generic Found initrd image: /boot/initrd.img-4.4.0-59-generic Found linux image: /boot/vmlinuz-3.13.0-107-generic Found initrd image: /boot/initrd.img-3.13.0-107-generic Found memtest86+ image: /memtest86+.elf Found memtest86+ image: /memtest86+.bin done ** Tags added: kernel-fixed-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Incomplete Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Ah, a notable difference between the hardware spec of the test servers and the real servers: The test server is on a test machine which has a graphics board installed in it: EVGA e-GeForce 8400 GS Graphics Card - 512 MB RAM 512-P3-1301-KR The real servers are using the on-board Intel graphics. No option to move the Nvidia board to the impacted server machine as there is no PCI-e slot on the server boards. They have only one card slot which is in use for the RAID controller. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Confirmed Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Attachment added: "cmdline.log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+attachment/4804629/+files/cmdline.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Confirmed Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
A friend advised me to check two more outputs between a 14.04 server and 16.04 impacted server. Attaching the following additional outputs: mdlueck@ldslnx01:/srv/shares/data/Download/OpenSource/Ubuntu/Xenial/Bugs/1656605_ServerNoConsoleDisplay$ cat /proc/consoles > consoles.log mdlueck@ldslnx01:/srv/shares/data/Download/OpenSource/Ubuntu/Xenial/Bugs/1656605_ServerNoConsoleDisplay$ cat /proc/cmdline > cmdline.log mdlueck@ldslnx01:/srv/shares/data/Download/OpenSource/Ubuntu/Xenial/Bugs/1656605_ServerNoConsoleDisplay$ cat consoles.log tty0 -WU (EC p )4:1 mdlueck@ldslnx01:/srv/shares/data/Download/OpenSource/Ubuntu/Xenial/Bugs/1656605_ServerNoConsoleDisplay$ cat cmdline.log BOOT_IMAGE=/vmlinuz-4.4.0-59-generic root=UUID=87ad7999-94fd-4004-b898-d6a943e5895e ro quiet splash vt.handoff=7 BTW: Another server, same config still on 14.04 LTS shows output: mdlueck@cirlnx01:~$ cat /proc/consoles tty0 -WU (EC p )4:1 $ cat /proc/cmdline BOOT_IMAGE=/vmlinuz-3.13.0-107-generic root=UUID=b8d89557-1fb2-4748-8708-f6ca416b7a87 ro quiet splash vt.handoff=7 So looks quite similar output. (I do not detect any red flags, at least.) ** Attachment added: "consoles.log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+attachment/4804628/+files/consoles.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux package in Ubuntu: Confirmed Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Attachment added: "uname-a.log" https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+attachment/4804496/+files/uname-a.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux-meta package in Ubuntu: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Attachment added: "linux-images.log" https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+attachment/4804498/+files/linux-images.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux-meta package in Ubuntu: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Attachment added: "dmesg.log" https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+attachment/4804494/+files/dmesg.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux-meta package in Ubuntu: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Attachment added: "version.log" https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+attachment/4804497/+files/version.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux-meta package in Ubuntu: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] Re: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
** Attachment added: "lspci-vnvn.log" https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+attachment/4804495/+files/lspci-vnvn.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux-meta package in Ubuntu: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1656605] [NEW] No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8
Public bug reported: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1656605 Title: No server console display after Grub screen until fully booted and pressing Ctrl-Alt-F1/8 Status in linux-meta package in Ubuntu: New Bug description: Today I did our first production 14.04 to 16.04 LTS server upgrade. I had done so a couple of times successfully on test server machines. Upon booting up on the 16.04 system/kernel, after the Grub screen the server console screen is completely blank. Someone suggested using Ctrl-Alt-F1/8, and indeed pressing those hotkeys does toggle through the tty screens. There is no boot process logged to the server console screen. I did have the last 14.04 kernel yet installed, so selected that one from the Grub menu. Booting that 14.04 kernel, then server console display behaves normally. So I suspected perhaps a bum install of the 16.04 kernel. I used the following commands while booted to the 14.04 kernel to reinstall the 16.04 kernel: $ sudo dpkg -P linux-image-4.4.0-59-generic linux-image-extra-4.4.0-59-generic linux-image-generic $ sudo apt-get install linux-image-generic Same results booting the 16.04 kernel after those steps. Hardware spec is an Intel Atom D945GCLF2D boxed motherboard with Intel Atom 330 Dual-Core processor and 2GB RAM. RAID is 3Ware SATA RAID. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1656605/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1304808] Re: All USB ports/devices randomly stop working
I just reloaded the production drive in the test machine with the GA release of Xubuntu 14.04 x64 and find that the USB mouse is working as expected. I note the mention of nvidia drivers in #11. I had not added those what I found USB ports dead. I need to install those. I had opened a bug report about difficulties installing the nvidia drivers on this machine, here: Nvidia Optimus + bumblebee configuration not optimized by default https://bugs.launchpad.net/bugs/1280613 We shall see if that damages USB mouse support, if it actually works as well in the GA release. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1304808 Title: All USB ports/devices randomly stop working Status in “linux” package in Ubuntu: Confirmed Bug description: I do not know how to reliably reproduce this, but since an update in trusty a couple of days ago I am getting a random USB device stop working and then they all start going one by one. The mouse and keyboard included in this of course. This has happened to me before and it was fixed in saucy. This is a regression. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ed 2480 F pulseaudio CurrentDesktop: Unity Date: Wed Apr 9 15:07:40 2014 HibernationDevice: RESUME=UUID=73dd7b46-df18-4ae4-9a16-7e635959e1b1 IwConfig: eth0 no wireless extensions. lono wireless extensions. virbr0no wireless extensions. MachineType: System manufacturer System Product Name ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-23-generic root=UUID=38c98076-521e-408e-af6a-2e8e00de0f05 ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw RelatedPackageVersions: linux-restricted-modules-3.13.0-23-generic N/A linux-backports-modules-3.13.0-23-generic N/A linux-firmware 1.127 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-01-20 (78 days ago) dmi.bios.date: 05/28/2008 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: ASUS M3N72-D ACPI BIOS Revision 0202 dmi.board.name: M3N72-D dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: 1.XX dmi.chassis.asset.tag: 123456789000 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvrASUSM3N72-DACPIBIOSRevision0202:bd05/28/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM3N72-D:rvr1.XX:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1304808/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1304808] Re: All USB ports/devices randomly stop working
I last loaded the test ThinkPad T540p with a Xubuntu 14.04 20140225 Beta 1 ISO. New HDD today, thus new Xubuntu ISO, and I cannot get the USB mouse to light up (optical mouse) in either USB port on each side of the unit. How can I help test to resolve this critical bug? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1304808 Title: All USB ports/devices randomly stop working Status in “linux” package in Ubuntu: Confirmed Bug description: I do not know how to reliably reproduce this, but since an update in trusty a couple of days ago I am getting a random USB device stop working and then they all start going one by one. The mouse and keyboard included in this of course. This has happened to me before and it was fixed in saucy. This is a regression. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ed 2480 F pulseaudio CurrentDesktop: Unity Date: Wed Apr 9 15:07:40 2014 HibernationDevice: RESUME=UUID=73dd7b46-df18-4ae4-9a16-7e635959e1b1 IwConfig: eth0 no wireless extensions. lono wireless extensions. virbr0no wireless extensions. MachineType: System manufacturer System Product Name ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-23-generic root=UUID=38c98076-521e-408e-af6a-2e8e00de0f05 ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw RelatedPackageVersions: linux-restricted-modules-3.13.0-23-generic N/A linux-backports-modules-3.13.0-23-generic N/A linux-firmware 1.127 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-01-20 (78 days ago) dmi.bios.date: 05/28/2008 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: ASUS M3N72-D ACPI BIOS Revision 0202 dmi.board.name: M3N72-D dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: 1.XX dmi.chassis.asset.tag: 123456789000 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvrASUSM3N72-DACPIBIOSRevision0202:bd05/28/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM3N72-D:rvr1.XX:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1304808/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1304808] Re: All USB ports/devices randomly stop working
I put the former drive back in. It appears to have only one kernel update older than current, and the USB mouse works fine. Packages on that drive are as follows: $ dpkg -l | grep linux- ii linux-firmware1.125 all Firmware for Linux kernel drivers ii linux-generic 3.13.0.12.16 amd64Complete Generic Linux kernel and headers ii linux-headers-3.13.0-12 3.13.0-12.32 all Header files related to Linux kernel version 3.13.0 ii linux-headers-3.13.0-12-generic 3.13.0-12.32 amd64Linux kernel headers for version 3.13.0 on 64 bit x86 SMP ii linux-headers-generic 3.13.0.12.16 amd64Generic Linux kernel headers ii linux-image-3.13.0-12-generic 3.13.0-12.32 amd64Linux kernel image for version 3.13.0 on 64 bit x86 SMP ii linux-image-extra-3.13.0-12-generic 3.13.0-12.32 amd64Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-generic 3.13.0.12.16 amd64Generic Linux kernel image ii linux-libc-dev:amd64 3.13.0-12.32 amd64Linux Kernel Headers for development ii linux-sound-base 1.0.25+dfsg-0ubuntu4 all base package for ALSA and OSS sound systems $ uname -a Linux noah 3.13.0-12-generic #32-Ubuntu SMP Fri Feb 21 17:45:10 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Are further details needed? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1304808 Title: All USB ports/devices randomly stop working Status in “linux” package in Ubuntu: Confirmed Bug description: I do not know how to reliably reproduce this, but since an update in trusty a couple of days ago I am getting a random USB device stop working and then they all start going one by one. The mouse and keyboard included in this of course. This has happened to me before and it was fixed in saucy. This is a regression. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ed 2480 F pulseaudio CurrentDesktop: Unity Date: Wed Apr 9 15:07:40 2014 HibernationDevice: RESUME=UUID=73dd7b46-df18-4ae4-9a16-7e635959e1b1 IwConfig: eth0 no wireless extensions. lono wireless extensions. virbr0no wireless extensions. MachineType: System manufacturer System Product Name ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-23-generic root=UUID=38c98076-521e-408e-af6a-2e8e00de0f05 ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw RelatedPackageVersions: linux-restricted-modules-3.13.0-23-generic N/A linux-backports-modules-3.13.0-23-generic N/A linux-firmware 1.127 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-01-20 (78 days ago) dmi.bios.date: 05/28/2008 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: ASUS M3N72-D ACPI BIOS Revision 0202 dmi.board.name: M3N72-D dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: 1.XX dmi.chassis.asset.tag: 123456789000 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvrASUSM3N72-DACPIBIOSRevision0202:bd05/28/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM3N72-D:rvr1.XX:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1304808/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 645211] Re: USB HDD and Flash Drives no longer recognized
A while ago I upgraded from Ubuntu Server 10.04 LTS to 12.04 LTS, and the USB HDD is properly attached automatically to a USB2 controller rather than USB 1.1. I no longer need the script posted in #23 to wake up the USB subsystem back to reality. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/645211 Title: USB HDD and Flash Drives no longer recognized Status in “linux” package in Ubuntu: Confirmed Bug description: The current kernel back in July (I think around the 20's) of 2010 was working well with USB HDD's. For a couple of weeks now, I have not been able to attach a UDB HDD or USB Flash Drive to our 10.04.1 fully updated server. Perhaps there has been a kernel update that nuked USB mass storage from the server kernel. Ubuntu Desktop 10.04.1 does not appear to be affected. Someone suggested plugging a USB Keyboard in, and that does work, though USB mass storage still does not work. We use USB HDD's as backup media, so this is quite important to get resolved. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-24-generic-pae 2.6.32-24.43 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-24.43-generic-pae 2.6.32.15+drm33.5 Uname: Linux 2.6.32-24-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. AplayDevices: Error: [Errno 2] No such file or directory Architecture: i386 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Error: [Errno 2] No such file or directory Card0.Amixer.values: Error: [Errno 2] No such file or directory Date: Wed Sep 22 09:11:03 2010 IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-24-generic-pae root=UUID=87ad7999-94fd-4004-b898-d6a943e5895e ro quiet splash ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34.1 RfKill: SourcePackage: linux dmi.bios.date: 07/29/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: LF94510J.86A.0229.2009.0729.0209 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: D945GCLF dmi.board.vendor: Intel Corporation dmi.board.version: AAE27042-400 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrLF94510J.86A.0229.2009.0729.0209:bd07/29/2009:svn:pn:pvr:rvnIntelCorporation:rnD945GCLF:rvrAAE27042-400:cvn:ct3:cvr: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/645211/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
