subject:"\[Kernel\-packages\] \[Bug 1719853\] Re\: Plantronics P610 does not support sample rate reading"

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2018-01-09 Thread Launchpad Bug Tracker

This bug was fixed in the package linux - 4.13.0-25.29

---
linux (4.13.0-25.29) artful; urgency=low

  * linux: 4.13.0-25.29 -proposed tracker (LP: #1741955)

  * CVE-2017-5754
- Revert "UBUNTU: [Config] updateconfigs to enable PTI"
- [Config] Enable PTI with UNWINDER_FRAME_POINTER

linux (4.13.0-24.28) artful; urgency=low

  * linux: 4.13.0-24.28 -proposed tracker (LP: #1741745)

  * CVE-2017-5754
- x86/cpu, x86/pti: Do not enable PTI on AMD processors

linux (4.13.0-23.27) artful; urgency=low

  * linux: 4.13.0-23.27 -proposed tracker (LP: #1741556)

  [ Kleber Sacilotto de Souza ]
  * CVE-2017-5754
- x86/mm: Add the 'nopcid' boot option to turn off PCID
- x86/mm: Enable CR4.PCIDE on supported systems
- x86/mm: Document how CR4.PCIDE restore works
- x86/entry/64: Refactor IRQ stacks and make them NMI-safe
- x86/entry/64: Initialize the top of the IRQ stack before switching stacks
- x86/entry/64: Add unwind hint annotations
- xen/x86: Remove SME feature in PV guests
- x86/xen/64: Rearrange the SYSCALL entries
- irq: Make the irqentry text section unconditional
- x86/xen/64: Fix the reported SS and CS in SYSCALL
- x86/paravirt/xen: Remove xen_patch()
- x86/traps: Simplify pagefault tracing logic
- x86/idt: Unify gate_struct handling for 32/64-bit kernels
- x86/asm: Replace access to desc_struct:a/b fields
- x86/xen: Get rid of paravirt op adjust_exception_frame
- x86/paravirt: Remove no longer used paravirt functions
- x86/entry: Fix idtentry unwind hint
- x86/mm/64: Initialize CR4.PCIDE early
- objtool: Add ORC unwind table generation
- objtool, x86: Add facility for asm code to provide unwind hints
- x86/unwind: Add the ORC unwinder
- x86/kconfig: Consolidate unwinders into multiple choice selection
- objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
- x86/ldt/64: Refresh DS and ES when modify_ldt changes an entry
- x86/mm: Give each mm TLB flush generation a unique ID
- x86/mm: Track the TLB's tlb_gen and update the flushing algorithm
- x86/mm: Rework lazy TLB mode and TLB freshness tracking
- x86/mm: Implement PCID based optimization: try to preserve old TLB entries
  using PCID
- x86/mm: Factor out CR3-building code
- x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
- x86/mm: Flush more aggressively in lazy TLB mode
- Revert "x86/mm: Stop calling leave_mm() in idle code"
- kprobes/x86: Set up frame pointer in kprobe trampoline
- x86/tracing: Introduce a static key for exception tracing
- x86/boot: Add early cmdline parsing for options with arguments
- mm, x86/mm: Fix performance regression in get_user_pages_fast()
- x86/asm: Remove unnecessary \n\t in front of CC_SET() from asm templates
- objtool: Don't report end of section error after an empty unwind hint
- x86/head: Remove confusing comment
- x86/head: Remove unused 'bad_address' code
- x86/head: Fix head ELF function annotations
- x86/boot: Annotate verify_cpu() as a callable function
- x86/xen: Fix xen head ELF annotations
- x86/xen: Add unwind hint annotations
- x86/head: Add unwind hint annotations
- ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()
- x86/unwinder: Make CONFIG_UNWINDER_ORC=y the default in the 64-bit 
defconfig
- x86/fpu/debug: Remove unused 'x86_fpu_state' and 
'x86_fpu_deactivate_state'
  tracepoints
- x86/unwind: Rename unwinder config options to 'CONFIG_UNWINDER_*'
- x86/unwind: Make CONFIG_UNWINDER_ORC=y the default in kconfig for 64-bit
- bitops: Add clear/set_bit32() to linux/bitops.h
- x86/cpuid: Add generic table for CPUID dependencies
- x86/fpu: Parse clearcpuid= as early XSAVE argument
- x86/fpu: Make XSAVE check the base CPUID features before enabling
- x86/fpu: Remove the explicit clearing of XSAVE dependent features
- x86/platform/UV: Convert timers to use timer_setup()
- objtool: Print top level commands on incorrect usage
- x86/cpuid: Prevent out of bound access in do_clear_cpu_cap()
- x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
- mm/sparsemem: Allocate mem_section at runtime for 
CONFIG_SPARSEMEM_EXTREME=y
- x86/kasan: Use the same shadow offset for 4- and 5-level paging
- x86/xen: Provide pre-built page tables only for CONFIG_XEN_PV=y and
  CONFIG_XEN_PVH=y
- x86/xen: Drop 5-level paging support code from the XEN_PV code
- ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
- x86/asm: Don't use the confusing '.ifeq' directive
- x86/build: Beautify build log of syscall headers
- x86/mm/64: Rename the register_page_bootmem_memmap() 'size' parameter to
  'nr_pages'
- x86/cpufeatures: Enable new SSE/AVX/AVX512 CPU features
- x86/mm: Relocate page fault error codes to traps.h
- x86/boot: Relocate definition of the

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-12-07 Thread Launchpad Bug Tracker

This bug was fixed in the package linux - 4.4.0-103.126

---
linux (4.4.0-103.126) xenial; urgency=low

  * linux: 4.4.0-103.126 -proposed tracker (LP: #1736181)

  * CVE-2017-1000405
- mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()

  * CVE-2017-16939
- netlink: add a start callback for starting a netlink dump
- ipsec: Fix aborted xfrm policy dump crash

linux (4.4.0-102.125) xenial; urgency=low

  * linux: 4.4.0-102.125 -proposed tracker (LP: #1733541)

  * tar -x sometimes fails on overlayfs (LP: #1728489)
- ovl: check if all layers are on the same fs
- ovl: persistent inode number for directories

  * NVMe timeout is too short (LP: #1729119)
- nvme: update timeout module parameter type

  * Set PANIC_TIMEOUT=10 on Power Systems (LP: #1730660)
- [Config]: Set PANIC_TIMEOUT=10 on ppc64el

  * Cannot pair BLE remote devices when using combo BT SoC (LP: #1731467)
- Bluetooth: increase timeout for le auto connections

  * CIFS errors on 4.4.0-98, but not on 4.4.0-97 with same config (LP: #1729337)
- SMB3: Validate negotiate request must always be signed

  * Plantronics P610 does not support sample rate reading (LP: #1719853)
- ALSA: usb-audio: Add sample rate quirk for Plantronics P610

  * Invalid btree pointer causes the kernel NULL pointer dereference
(LP: #1729256)
- xfs: reinit btree pointer on attr tree inactivation walk

  * Samba mount/umount in docker container triggers kernel Oops (LP: #1729637)
- ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
- ipv6: fix NULL dereference in ip6_route_dev_notify()

  * [kernel] tty/hvc: Use opal irqchip interface if available (LP: #1728098)
- tty/hvc: Use opal irqchip interface if available

  * Device hotplugging with MPT SAS cannot work for VMWare ESXi (LP: #1730852)
- scsi: mptsas: Fixup device hotplug for VMWare ESXi

  * NMI watchdog: BUG: soft lockup on Guest upon boot (KVM) (LP: #1727331)
- KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread

  * Attempt to map rbd image from ceph jewel/luminous hangs (LP: #1728739)
- crush: ensure bucket id is valid before indexing buckets array
- crush: ensure take bucket value is valid
- crush: add chooseleaf_stable tunable
- crush: decode and initialize chooseleaf_stable
- libceph: advertise support for TUNABLES5
- libceph: MOSDOpReply v7 encoding

  * Xenial update to 4.4.98 stable release (LP: #1732698)
- adv7604: Initialize drive strength to default when using DT
- video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
- PCI: mvebu: Handle changes to the bridge windows while enabled
- xen/netback: set default upper limit of tx/rx queues to 8
- drm: drm_minor_register(): Clean up debugfs on failure
- KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter
- iommu/arm-smmu-v3: Clear prior settings when updating STEs
- powerpc/corenet: explicitly disable the SDHC controller on kmcoge4
- ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
- crypto: vmx - disable preemption to enable vsx in aes_ctr.c
- iio: trigger: free trigger resource correctly
- phy: increase size of MII_BUS_ID_SIZE and bus_id
- serial: sh-sci: Fix register offsets for the IRDA serial port
- usb: hcd: initialize hcd->flags to 0 when rm hcd
- netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family
- IPsec: do not ignore crypto err in ah4 input
- Input: mpr121 - handle multiple bits change of status register
- Input: mpr121 - set missing event capability
- IB/ipoib: Change list_del to list_del_init in the tx object
- s390/qeth: issue STARTLAN as first IPA command
- (config) Add NET_DSA=n
- net: dsa: select NET_SWITCHDEV
- platform/x86: hp-wmi: Fix detection for dock and tablet mode
- cdc_ncm: Set NTB format again after altsetting switch for Huawei devices
- KEYS: trusted: sanitize all key material
- KEYS: trusted: fix writing past end of buffer in trusted_read()
- platform/x86: hp-wmi: Fix error value for hp_wmi_tablet_state
- platform/x86: hp-wmi: Do not shadow error values
- x86/uaccess, sched/preempt: Verify access_ok() context
- workqueue: Fix NULL pointer dereference
- crypto: x86/sha1-mb - fix panic due to unaligned access
- KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
- ARM: 8720/1: ensure dump_instr() checks addr_limit
- ALSA: seq: Fix OSS sysex delivery in OSS emulation
- ALSA: seq: Avoid invalid lockdep class warning
- MIPS: microMIPS: Fix incorrect mask in insn_table_MM
- MIPS: Fix CM region target definitions
- MIPS: SMP: Use a completion event to signal CPU up
- MIPS: Fix race on setting and getting cpu_online_mask
- MIPS: SMP: Fix deadlock & online race
- test: firmware_class: report errors properly on failure
- selftests: firmware: add empty string and async

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-12-07 Thread Launchpad Bug Tracker

This bug was fixed in the package linux - 4.4.0-103.126

---
linux (4.4.0-103.126) xenial; urgency=low

  * linux: 4.4.0-103.126 -proposed tracker (LP: #1736181)

  * CVE-2017-1000405
- mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()

  * CVE-2017-16939
- netlink: add a start callback for starting a netlink dump
- ipsec: Fix aborted xfrm policy dump crash

linux (4.4.0-102.125) xenial; urgency=low

  * linux: 4.4.0-102.125 -proposed tracker (LP: #1733541)

  * tar -x sometimes fails on overlayfs (LP: #1728489)
- ovl: check if all layers are on the same fs
- ovl: persistent inode number for directories

  * NVMe timeout is too short (LP: #1729119)
- nvme: update timeout module parameter type

  * Set PANIC_TIMEOUT=10 on Power Systems (LP: #1730660)
- [Config]: Set PANIC_TIMEOUT=10 on ppc64el

  * Cannot pair BLE remote devices when using combo BT SoC (LP: #1731467)
- Bluetooth: increase timeout for le auto connections

  * CIFS errors on 4.4.0-98, but not on 4.4.0-97 with same config (LP: #1729337)
- SMB3: Validate negotiate request must always be signed

  * Plantronics P610 does not support sample rate reading (LP: #1719853)
- ALSA: usb-audio: Add sample rate quirk for Plantronics P610

  * Invalid btree pointer causes the kernel NULL pointer dereference
(LP: #1729256)
- xfs: reinit btree pointer on attr tree inactivation walk

  * Samba mount/umount in docker container triggers kernel Oops (LP: #1729637)
- ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
- ipv6: fix NULL dereference in ip6_route_dev_notify()

  * [kernel] tty/hvc: Use opal irqchip interface if available (LP: #1728098)
- tty/hvc: Use opal irqchip interface if available

  * Device hotplugging with MPT SAS cannot work for VMWare ESXi (LP: #1730852)
- scsi: mptsas: Fixup device hotplug for VMWare ESXi

  * NMI watchdog: BUG: soft lockup on Guest upon boot (KVM) (LP: #1727331)
- KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread

  * Attempt to map rbd image from ceph jewel/luminous hangs (LP: #1728739)
- crush: ensure bucket id is valid before indexing buckets array
- crush: ensure take bucket value is valid
- crush: add chooseleaf_stable tunable
- crush: decode and initialize chooseleaf_stable
- libceph: advertise support for TUNABLES5
- libceph: MOSDOpReply v7 encoding

  * Xenial update to 4.4.98 stable release (LP: #1732698)
- adv7604: Initialize drive strength to default when using DT
- video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
- PCI: mvebu: Handle changes to the bridge windows while enabled
- xen/netback: set default upper limit of tx/rx queues to 8
- drm: drm_minor_register(): Clean up debugfs on failure
- KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter
- iommu/arm-smmu-v3: Clear prior settings when updating STEs
- powerpc/corenet: explicitly disable the SDHC controller on kmcoge4
- ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
- crypto: vmx - disable preemption to enable vsx in aes_ctr.c
- iio: trigger: free trigger resource correctly
- phy: increase size of MII_BUS_ID_SIZE and bus_id
- serial: sh-sci: Fix register offsets for the IRDA serial port
- usb: hcd: initialize hcd->flags to 0 when rm hcd
- netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family
- IPsec: do not ignore crypto err in ah4 input
- Input: mpr121 - handle multiple bits change of status register
- Input: mpr121 - set missing event capability
- IB/ipoib: Change list_del to list_del_init in the tx object
- s390/qeth: issue STARTLAN as first IPA command
- (config) Add NET_DSA=n
- net: dsa: select NET_SWITCHDEV
- platform/x86: hp-wmi: Fix detection for dock and tablet mode
- cdc_ncm: Set NTB format again after altsetting switch for Huawei devices
- KEYS: trusted: sanitize all key material
- KEYS: trusted: fix writing past end of buffer in trusted_read()
- platform/x86: hp-wmi: Fix error value for hp_wmi_tablet_state
- platform/x86: hp-wmi: Do not shadow error values
- x86/uaccess, sched/preempt: Verify access_ok() context
- workqueue: Fix NULL pointer dereference
- crypto: x86/sha1-mb - fix panic due to unaligned access
- KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
- ARM: 8720/1: ensure dump_instr() checks addr_limit
- ALSA: seq: Fix OSS sysex delivery in OSS emulation
- ALSA: seq: Avoid invalid lockdep class warning
- MIPS: microMIPS: Fix incorrect mask in insn_table_MM
- MIPS: Fix CM region target definitions
- MIPS: SMP: Use a completion event to signal CPU up
- MIPS: Fix race on setting and getting cpu_online_mask
- MIPS: SMP: Fix deadlock & online race
- test: firmware_class: report errors properly on failure
- selftests: firmware: add empty string and async

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-12-07 Thread Launchpad Bug Tracker

This bug was fixed in the package linux - 4.10.0-42.46

---
linux (4.10.0-42.46) zesty; urgency=low

  * linux: 4.10.0-42.46 -proposed tracker (LP: #1736152)

  * CVE-2017-1000405
- mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()

  * CVE-2017-16939
- ipsec: Fix aborted xfrm policy dump crash

linux (4.10.0-41.45) zesty; urgency=low

  * linux: 4.10.0-41.45 -proposed tracker (LP: #1733524)

  * tar -x sometimes fails on overlayfs (LP: #1728489)
- ovl: check if all layers are on the same fs
- ovl: persistent inode number for directories

  * CVE-2017-12146
- driver core: platform: fix race condition with driver_override

  * NVMe timeout is too short (LP: #1729119)
- nvme: update timeout module parameter type

  * Set PANIC_TIMEOUT=10 on Power Systems (LP: #1730660)
- [Config]: Set PANIC_TIMEOUT=10 on ppc64el

  * Cannot pair BLE remote devices when using combo BT SoC (LP: #1731467)
- Bluetooth: increase timeout for le auto connections

  * Plantronics P610 does not support sample rate reading (LP: #1719853)
- ALSA: usb-audio: Add sample rate quirk for Plantronics P610

  * Invalid btree pointer causes the kernel NULL pointer dereference
(LP: #1729256)
- xfs: reinit btree pointer on attr tree inactivation walk

  * Samba mount/umount in docker container triggers kernel Oops (LP: #1729637)
- ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
- ipv6: fix NULL dereference in ip6_route_dev_notify()

  * Device hotplugging with MPT SAS cannot work for VMWare ESXi (LP: #1730852)
- scsi: mptsas: Fixup device hotplug for VMWare ESXi

  * Boot/Installation crash of Ubuntu-16.04.3 HWE kernel on R940 (LP: #1719697)
- Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"

 -- Stefan Bader   Mon, 04 Dec 2017 15:04:01
+0100

** Changed in: linux (Ubuntu Xenial)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Released
Status in linux source package in Zesty:
  Fix Released
Status in linux source package in Artful:
  Fix Released

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-12-07 Thread Launchpad Bug Tracker

This bug was fixed in the package linux - 4.13.0-19.22

---
linux (4.13.0-19.22) artful; urgency=low

  * linux: 4.13.0-19.22 -proposed tracker (LP: #1736118)

  * CVE-2017-1000405
- mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()

linux (4.13.0-18.21) artful; urgency=low

  * linux: 4.13.0-18.21 -proposed tracker (LP: #1733530)

  * NVMe timeout is too short (LP: #1729119)
- nvme: update timeout module parameter type

  * CPU call trace on AMD Raven Ridge after S3 (LP: #1732894)
- x86/mce/AMD: Allow any CPU to initialize the smca_banks array

  * Set PANIC_TIMEOUT=10 on Power Systems (LP: #1730660)
- [Config]: Set PANIC_TIMEOUT=10 on ppc64el

  * Cannot pair BLE remote devices when using combo BT SoC (LP: #1731467)
- Bluetooth: increase timeout for le auto connections

  * enable CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH easily confuse users
(LP: #1732627)
- [Config] CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=n

  * Plantronics P610 does not support sample rate reading (LP: #1719853)
- ALSA: usb-audio: Add sample rate quirk for Plantronics P610

  * Allow drivers to use Relaxed Ordering on capable root ports (LP: #1721365)
- Revert commit 1a8b6d76dc5b ("net:add one common config...")
- net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

  * support GICv3 ITS save/restore & migration (LP: #1710019)
- KVM: arm/arm64: vgic-its: Fix return value for device table restore

  * Device hotplugging with MPT SAS cannot work for VMWare ESXi (LP: #1730852)
- scsi: mptsas: Fixup device hotplug for VMWare ESXi

  * Artful update to 4.13.13 stable release (LP: #1732726)
- netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to
  rhashtable"
- netfilter: nft_set_hash: disable fast_ops for 2-len keys
- workqueue: Fix NULL pointer dereference
- crypto: ccm - preserve the IV buffer
- crypto: x86/sha1-mb - fix panic due to unaligned access
- crypto: x86/sha256-mb - fix panic due to unaligned access
- KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
- ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360
- ARM: 8720/1: ensure dump_instr() checks addr_limit
- ALSA: timer: Limit max instances per timer
- ALSA: usb-audio: support new Amanero Combo384 firmware version
- ALSA: hda - fix headset mic problem for Dell machines with alc274
- ALSA: seq: Fix OSS sysex delivery in OSS emulation
- ALSA: seq: Avoid invalid lockdep class warning
- MIPS: Fix CM region target definitions
- MIPS: BMIPS: Fix missing cbr address
- MIPS: AR7: Defer registration of GPIO
- MIPS: AR7: Ensure that serial ports are properly set up
- KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT
  updates
- Input: elan_i2c - add ELAN060C to the ACPI table
- rbd: use GFP_NOIO for parent stat and data requests
- drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue
- Revert "x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo"
- can: sun4i: handle overrun in RX FIFO
- can: peak: Add support for new PCIe/M2 CAN FD interfaces
- can: ifi: Fix transmitter delay calculation
- can: c_can: don't indicate triple sampling support for D_CAN
- x86/debug: Handle warnings before the notifier chain, to fix KGDB crash
- x86/smpboot: Make optimization of delay calibration work correctly
- x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context
- Linux 4.13.13

  * ELANTECH Touchpad is not detected in 'Lenovo Ideapad 320 14AST' after fresh
install (LP: #1727544)
- Input: elan_i2c - add ELAN060C to the ACPI table

  * Power8 Nest PMU Instrumentation support (LP: #1481347)
- powerpc/powernv: Add IMC OPAL APIs
- powerpc/powernv: Detect and create IMC device
- powerpc/perf: Add nest IMC PMU support
- powerpc/perf: Add core IMC PMU support
- powerpc/perf: Add thread IMC PMU support
- powerpc/perf: Fix double unlock in imc_common_cpuhp_mem_free()
- powerpc/perf/imc: Fix nest events on muti socket system
- powerpc/powernv: Fix build error in opal-imc.c when NUMA=n
- powerpc/perf: Fix usage of nest_imc_refc
- powerpc/perf: Fix for core/nest imc call trace on cpuhotplug
- powerpc/perf: Add ___GFP_NOWARN flag to alloc_pages_node()
- powerpc/perf: Fix IMC initialization crash

  * Artful update to 4.13.12 stable release (LP: #1731971)
- ALSA: timer: Add missing mutex lock for compat ioctls
- ALSA: seq: Fix nested rwsem annotation for lockdep splat
- cifs: check MaxPathNameComponentLength != 0 before using it
- KEYS: return full count in keyring_read() if buffer is too small
- KEYS: trusted: fix writing past end of buffer in trusted_read()
- KEYS: fix out-of-bounds read during ASN.1 parsing
- ASoC: adau17x1: Workaround for noise bug in ADC
- virtio_blk: Fix an SG_IO regression
- arm64: ensure __dump_instr() checks addr_limit

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-12-06 Thread Kleber Sacilotto de Souza

Hi @timdepauw,

Could you please verify if the xenial, zesty and artful kernels
currently in -proposed fix the issue?

Thank you.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed
Status in linux source package in Artful:
  Fix Committed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-11-29 Thread Khaled El Mously

This bug is awaiting verification that the kernel in -proposed solves
the problem. Please test the kernel and update this bug with the
results. If the problem is solved, change the tag 'verification-needed-
artful' to 'verification-done-artful'. If the problem still exists,
change the tag 'verification-needed-artful' to 'verification-failed-
artful'.

If verification is not done by 5 working days from today, this fix will
be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how
to enable and use -proposed. Thank you!


** Tags added: verification-needed-artful

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed
Status in linux source package in Artful:
  Fix Committed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-11-28 Thread Khaled El Mously

This bug is awaiting verification that the kernel in -proposed solves
the problem. Please test the kernel and update this bug with the
results. If the problem is solved, change the tag 'verification-needed-
xenial' to 'verification-done-xenial'. If the problem still exists,
change the tag 'verification-needed-xenial' to 'verification-failed-
xenial'.

If verification is not done by 5 working days from today, this fix will
be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how
to enable and use -proposed. Thank you!


** Tags added: verification-needed-xenial

** Tags added: verification-needed-zesty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed
Status in linux source package in Artful:
  Fix Committed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-11-28 Thread Khaled El Mously

This bug is awaiting verification that the kernel in -proposed solves
the problem. Please test the kernel and update this bug with the
results. If the problem is solved, change the tag 'verification-needed-
zesty' to 'verification-done-zesty'. If the problem still exists, change
the tag 'verification-needed-zesty' to 'verification-failed-zesty'.

If verification is not done by 5 working days from today, this fix will
be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how
to enable and use -proposed. Thank you!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed
Status in linux source package in Artful:
  Fix Committed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-11-22 Thread Kai-Heng Feng

** Changed in: linux (Ubuntu)
 Assignee: Kai-Heng Feng (kaihengfeng) => (unassigned)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed
Status in linux source package in Artful:
  Fix Committed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-11-20 Thread Stefan Bader

** Description changed:

  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in order
  for me to use my Plantronics P610. Thanks!
+ 
+ == SRU Justification ==
+ 
+ [Impact]
+ [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
+ ...the same message will flood over dmesg.
+ 
+ [Test Case]
+ With this patch, ALSA stops trying to read sample rate from device,
+ hence no more error messages.
+ 
+ [Fix]
+ Make affected device to use sample rate quirk.
+ 
+ [Regression Potential]
+ Minimal. This patch only affect one device.

** Changed in: linux (Ubuntu Artful)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Artful)
   Status: New => Fix Committed

** Changed in: linux (Ubuntu Zesty)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Zesty)
   Status: New => Fix Committed

** Changed in: linux (Ubuntu Xenial)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Xenial)
   Status: New => Fix Committed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed
Status in linux source package in Artful:
  Fix Committed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

  == SRU Justification ==

  [Impact]
  [ 74.344674] usb 3-1: 2:1: cannot get freq at ep 0x1
  ...the same message will flood over dmesg.

  [Test Case]
  With this patch, ALSA stops trying to read sample rate from device,
  hence no more error messages.

  [Fix]
  Make affected device to use sample rate quirk.

  [Regression Potential]
  Minimal. This patch only affect one device.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-11-15 Thread Stefan Bader

** Also affects: linux (Ubuntu Artful)
   Importance: Undecided
   Status: New

** Also affects: linux (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Also affects: linux (Ubuntu Zesty)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete
Status in linux source package in Xenial:
  New
Status in linux source package in Zesty:
  New
Status in linux source package in Artful:
  New

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-10-16 Thread madbiologist

The upstream kernel 4.14-rc5 contains a patch for this ALSA: usb-audio:
Add sample rate quirk for Plantronics P610
https://patchwork.kernel.org/patch/9987737/

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-10-09 Thread Tim De Pauw

Thanks!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-10-05 Thread Tim De Pauw

That one seems to be working like a treat. No errors in `dmesg` and it
picks up the device as it should in Hangouts on both Chrome and
Chromium.

Just to confirm:

$ uname -a
Linux chowchow 4.13.0-13-generic #14~1719853 SMP Sat Sep 30 23:19:40 CST 2017 
x86_64 x86_64 x86_64 GNU/Linux


** Tags added: kernel-fixed-upstream

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-09-30 Thread Kai-Heng Feng

Please try kernel here:
http://people.canonical.com/~khfeng/lp1719853/

** Changed in: linux (Ubuntu)
 Assignee: (unassigned) => Kai-Heng Feng (kaihengfeng)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-09-28 Thread Tim De Pauw

Here are my findings with that kernel:

- My network connections don't work anymore. Could be a side effect of 
something else so I'll ignore it.
- Chrome and Chromium do pick up the device now. With (offline) Hangouts in 
Chrome, "Play test sound" doesn't play any audio. Chromium does play it through 
the speaker so I'm guessing it's more of a Chrome issue.
- I do still get errors in `dmesg`:

  [  113.490781] usb 3-1: new full-speed USB device number 7 using xhci_hcd
  [  113.732898] usb 3-1: New USB device found, idVendor=047f, idProduct=c02f
  [  113.732903] usb 3-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
  [  113.732906] usb 3-1: Product: Plantronics P610
  [  113.732909] usb 3-1: Manufacturer: Plantronics
  [  113.732911] usb 3-1: SerialNumber: D21FA3D2B38C144D91AF207D0A9A030D
  [  114.377183] input: Plantronics Plantronics P610 as 
/devices/pci:00/:00:14.0/usb3/3-1/3-1:1.3/0003:047F:C02F.0004/input/input20
  [  114.395822] usb 3-1: 1:1: cannot get freq at ep 0x81
  [  114.397515] usb 3-1: 2:1: cannot get freq at ep 0x1
  [  114.410705] usbcore: registered new interface driver snd-usb-audio
  [  114.428427] usb 3-1: 2:1: cannot get freq at ep 0x1
  [  114.434951] plantronics 0003:047F:C02F.0004: input,hiddev0,hidraw3: USB 
HID v1.11 Device [Plantronics Plantronics P610] on usb-:00:14.0-1/input3

If those errors are expected, I think this can be closed.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-09-27 Thread Joseph Salisbury

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v4.14 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

Once testing of the upstream kernel is complete, please mark this bug as
"Confirmed".


Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.14-rc2/

** Changed in: linux (Ubuntu)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu)
   Status: Confirmed => Incomplete

** Tags added: kernel-da-key

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

2017-09-27 Thread Tim De Pauw

Pasting logs from
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
:

[ 93.738138] usb 3-2: USB disconnect, device number 5
[ 103.950487] usb 3-4: new full-speed USB device number 6 using xhci_hcd
[ 104.228308] usb 3-4: New USB device found, idVendor=047f, idProduct=c02f
[ 104.228312] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 104.228314] usb 3-4: Product: Plantronics P610
[ 104.228316] usb 3-4: Manufacturer: Plantronics
[ 104.228317] usb 3-4: SerialNumber: D21FA3D2B38C144D91AF207D0A9A030D
[ 104.368289] input: Plantronics Plantronics P610 as 
/devices/pci:00/:00:14.0/usb3/3-4/3-4:1.3/0003:047F:C02F.0002/input/input18
[ 104.422797] plantronics 0003:047F:C02F.0002: input,hiddev0,hidraw0: USB HID 
v1.11 Device [Plantronics Plantronics P610] on usb-:00:14.0-4/input3
[ 104.955080] usb 3-4: 1:1: cannot get freq at ep 0x81
[ 104.955294] usb 3-4: 1:1: cannot get freq at ep 0x81
[ 104.958747] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.958841] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.969429] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.969543] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.973338] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.973430] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.977360] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.977461] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.981966] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.982055] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.985335] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.985434] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.989361] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.989471] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.993311] usb 3-4: 2:1: cannot get freq at ep 0x1
[ 104.993397] usb 3-4: 2:1: cannot set freq 44100 to ep 0x1
[ 104.997442] usb 3-4: 1:1: cannot get freq at ep 0x81
[ 104.997589] usb 3-4: 1:1: cannot set freq 44100 to ep 0x81
[ 104.999399] usb 3-4: 1:1: cannot get freq at ep 0x81
[ 104.999504] usb 3-4: 1:1: cannot set freq 44100 to ep 0x81
[ 105.001310] usb 3-4: 1:1: cannot get freq at ep 0x81
[ 105.001379] usb 3-4: 1:1: cannot set freq 44100 to ep 0x81
[ 105.003233] usb 3-4: 1:1: cannot get freq at ep 0x81
[ 105.003339] usb 3-4: 1:1: cannot set freq 44100 to ep 0x81

** Changed in: linux (Ubuntu)
   Status: Incomplete => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1719853

Title:
  Plantronics P610 does not support sample rate reading

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  As per
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622763/comments/29
  and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709282 , I
  believe the USB ID 0x047F 0xC02F needs to be added to quirks.c in
  order for me to use my Plantronics P610. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1719853/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

[Kernel-packages] [Bug 1719853] Re: Plantronics P610 does not support sample rate reading

19 matches

Site Navigation

Mail list logo

Footer information