Hi,
Could you please change my name to David J S Briscoe (there are a few
David Briscoe's around and this could cause confusion)ready for the 6.01
release after 11th January 2022. Could you also please chang e it in the
6.99 nightly version. Thanks.
David J S Briscoe
On 24/12/2021 20:01
Thank you Mikolaj.
For taking care of this.
David.
On 24/12/2021 20:01, Mikołaj Wielgus wrote:
David,
I've restored the Translator-Other section, along with your name, in
6.0 and master branches. It shouldn't have been removed in the first
place. Unfortunately indeed this will only appear
Hi,
Will my name be listed under English translators (I am a native English
speaker not French) or French? I would like my work which took 3 years
to be recognized. I understand if the timing means that I have to wait
until the 6.01 release. Thanks.
David.
On 18/12/2021 05:56, Seth Hillbrand
Hi,
It was French to English help documentation translation along with a few
other people (listed on the credits under other translators in ALL
previous versions before V6 RC2). This was done between 2004 and 2007
using a Yahoo Group called "Kicad Document Translation". Thanks.
Dav
Hi,
I've noticed that the category translators-Other (along with my name)
has been removed from the latest version 6.0 RC2 credits. Why has this
happened? Please explain. Thank you.
Regards,
David J S Briscoe
PS I can send proof of my contribution to the project if required
. I'm acting as a kind of Beta tester and release candidates
would be useful. Thanks.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
SCRIPTING and OCE
- installed GLEW and GLM libraries
Now I'm struggling with CURL.. I'm not sure which library to install.
Libcurl4 and libcurl3-gnutls are preinstalled but obviously neither of them
is the needed.
So if someone have a hint on this.. thanks in advance
Cu
David
any previous versions. The uninstaller removes left
over directories and registry entries. Maybe I'll skip removing the
leftovers if it's causing a crash. I'm not using the nightlies for any
work yet anyway. Sticking with the stable for now.
David.
On 13/03/2021 15:30, Jon Evans wrote
I'm reporting this here as I am unable to provide any version
information as nothing starts up. This is reported as an incomplete
report by the Kicad bot on Gitlab.
Description
kicad-msvc.r21621.b71ab01d
Done. Thanks.
On 19/02/2021 17:52, Seth Hillbrand wrote:
You can click Help->Report Bug
Thanks-
Seth
On Fri, Feb 19, 2021 at 9:43 AM David <mailto:da...@djsbriscoe.vispa.com>> wrote:
Hi,
Just to let you know that there is a problem with the text on the
first
c
Thanks Seth,
I've just been going over the messages we exchanged in the Kicad
Document translation Yahoo group (active during 2004 to 2007) and there
is someone missing in the credits who should get a mention. Could you
please add Boris Barbour to the list as well. Thanks.
David.
On 25/12
Hello,
Could someone please change my name from
David Briscoe
To
David J S Briscoe
in
Help > About KiCad > Translators > Others
This is to distinguish my self from other people with a similar name and
to avoid any confusion.
Please do this when it is convenient. Thanks.
Regard
On August 12, 2018 7:20:40 PM PDT, David Griffith wrote:
>
>I'm trying to add some stuff to the 3D viewer that were removed when
>version 5 came out. One of these is an "Apply" button to the 3D viewer
Could I get some commentary on this or some suggestions? I don't know w
et the "Use
Touchpad to Pan" checkbox to toggle realistic mode. But I can't get the
realistic mode checkbox to do this.
Please take a look at https://github.com/DavidGriffith/kicad-source-mirror
in the 3d-viewer-mods branch.
--
David Griffith
d...@661.org
A: Because it fouls the order in
figure out
how to get it working. I don't see how OK or Cancel are processed, so I
can't use them as a model.
--
David Griffith
d...@661.org
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying
of html.
Regards
David Godfrey
SB Tech Services
mb: +61 437 286 200
chat:
with dcg_mx at
#sbts:matrix.org
(Computer)
#sbts:matrix.org
(mobile Device)
On 12/07/18 22:15, Wayne
Great job guys! Thanks for your investment in the project.
David
On 3/2/2018 2:40 AM, Maciej Sumiński wrote:
Congratulations fellow developers! You have received well deserved
promotions, and I am glad to see your names in the
kicad-product-committers group. Keep on rocking!
Cheers,
Orson
them yet. Also no problems on Ubuntu so far although I tend not to
use it extensively.
Bought the Dell as my last laptop has lasted 15 years and still works
fine (inspiron 8K). If you need any more info please ask. Thanks.
David.
___
Mailing list
as it's probably the 3rd or 4th time it's come up
recently that I've seen and I don't see everything ;-)
Regards
David Godfrey
SB Tech Services
mb: +61 437 286 200
chat:
with dcg_mx at
#sbts:matrix.org
(Computer
rds
David Godfrey
SB Tech Services
chat:
with dcg_mx at
#sbts:matrix.org
(Computer)
#sbts:matrix.org
(mobile Device)
___
Mailing list: https://launchpad.
Please enlighten me. I've always thought of STEP as the best end game,
but haven't had much time to investigate advantages and disadvantages.
What prevents STEP models from looking just as good as VRML models?
Best Regards,
David
On 11/6/2017 4:17 PM, Cirilo Bernardo wrote:
I wouldn't worry
wrote:
Simon, David,
Thanks for the synopsis of your idea David, there are
certainly some advantages to using the submodule approach.
Is it github compatible?
Simon, yes git-submodule is compatible with gith
submodules to the
current repo head's commit references to them)
Regards,
Bernhard
On 28. Sep 2017, at 13:29, Oliver Walters <oliver.henry.walt...@gmail.com>
wrote:
Thanks for the quick patch Wayne.
I'm focused on software dev right now, but will test when I can
free up some cycles.
Regards
David Godfrey
SB Tech Services
mb: +61 437 286 200
chat:
with dcg_mx
pad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
Regards
David Godfrey
SB Tech Services
mb: +61 437 286 200 <tel:+61437286200>
___
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
Regards
David Godfrey
SB Tech Services
mb: +61
You might consider muparser.
David
On 8/27/2017 11:03 AM, Russell Oliver wrote:
Hi all,
Attached is a patch that allows for the use of a mathematical
expression when editing the value field of components in Eeschema.
If editing the value field and the entered string begins with an
equals
video's and now I'm wondering how I set up the spice models (and
which ones to use = LTspice , Pspice?). Are there any demo or example
files you can share that would help me to get something set up? Thank you.
Regards,
David Briscoe
Documentation translator/contributor and Kicad enthusiast
Hi Wayne
On 19/04/17 03:34, Wayne Stambaugh
wrote:
Hey David,
On 4/18/2017 3:32 PM, David Godfrey wrote:
It would also break re-usability. I I have
a schematic file that
represents an instrument amp, and use it as a sheet
I agree,
A patch to add explanatory comments would seem to be required
here.
Otherwise someone in the future is likely to make a similar change
in a larger patch and it will likely be missed during review.
Regards
David G
On 13/04/17 21:34
Hi,
I'd vote of #3 but with the addition of a "Don't show this dialog in the
future" option.
If the "don't show" has been set, then simply auto save (ie: #4)
Regards
David G
On 31/03/17 01:33, Wayne Stambaugh wrote:
> I have found and fixed the bug in thi
scribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
--
Regards
David G
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.lau
is provide stitching as a hands off, but
still customizable option
Oh, and the same capability could be applied to layer/net
combinations too.
Regards
David G
On 29/10/16 12:58, Heikki Pulkkinen
wrote:
Hi Wayne,
I think that there is
are bad, better to update them and
properly implement.
Regards
David G
On 13/04/16 08:53, Chris Pavlina wrote:
> GAL already has this. Block or multi select, Ctrl-M for "move exactly" (or use
> the context menu), and type an angle. Just rotates the whole selection, then
> you can
the ability to do this, but on a
selection instead of globally.
And being able to alter it as an absolute angle, or as a relative to
current (prefix the new angle with + or - to get relative movement)
would be beneficial.
Regards
David G
On 13/04/16 06:40, Chris Pavlina wrote:
> I wonder how many of
to be able to enter any env var, and get a
warning (but only a warning) on saving the change if the env var is not set.
Display of the File Location should show the uninterpreted env var. ie
${ProjDir}/demo.pcb
Regards
David G
On 13/04/16 07:02, Wayne Stambaugh wrote:
> It's not necessary to def
Hi Wayne,
Nice concise response and good direction, exactly what is needed from a
Project Leader.
Regards
David G
On 12/04/16 07:32, Wayne Stambaugh wrote:
> I'm going to put on my project leader hat and try to respond to all of
> the issues discussed thus far rather than reply to each c
y only adding features to that struct when
a change is made from now on.
Regards
David G
> Thanks,
>
> Wayne
>
> On 4/10/2016 12:36 PM, jp charras wrote:
>> Le 10/04/2016 16:11, Chris Pavlina a écrit :
>>> I like the idea. It'll take some work to
wide IC packages that have the
same pitch, common in both DIP and SOIC packages
Of course you could create special footprints for these cases, but if
it's just one component on your board, and you only need to do it
occasionally it's simpler to just overlap the footprints.
Regards
David G
&
ranch "0.6" it is likely that the web
instructions will be wrong for one or both methods, while the docs
in the source tree should be correct or close to correct at least.
Regards
David G
>
> Regards,
> Orson
>
,
there is an implied % before and after the pattern
Regards
David G
On 19/12/15 04:56, Wayne Stambaugh
wrote:
On 12/18/2015 2:22 PM, Chris Pavlina wrote:
Thanks, and I don't mean to sound grouchy about it. I don't want to try
to be a backseat driver
that your previous post was only about 32 hours earlier than
mine.
Regards
David G
On 20/12/15 13:56, Chris Pavlina wrote:
> You do realize we've already argued over pretty much all the points you
> made, and _finished_ the patch already?
>
> On Sun, Dec 20, 2015 at 01:17:07PM +0800, D
Hi All,
Sorry for the accidental post to the list, forgot to delete the list
address before forwarding to a dev on another project
On 20/12/15 16:11, David Godfrey wrote:
Hi Erik,
Some interesting discussion on different search
Hi Chris,
I agree with keeping tab names short, but if the widget set allows I
normally set a tooltip for the tab that shows the longer form of the
name (where appropriate)
Regards
David G
On 20/12/15 01:06, Chris Pavlina wrote
gging time and way too much of the
documentation and coding time.
I'll climb down from my soapbox now, but I hope I have assisted
people's understanding of Wayne's refusal to use binary formats.
Regards
David G
On 19/12/15 05:46, Wayne Stambaugh
, verify it, get rate limiting and notification re-enabled.
Lots of open source projects migrate to github with all of there
history, so it has to be possible in a sane fashion.
Regards
David G
On 07/12/15 22:37, Mark Roszko wrote:
> So I did just a import of "open" issues from launc
se
to deal with any quirks.
BTW: I'm moving back to a Kicad only site as I nolonger have any clients
requiring Altium, the are all happy to use Kicad now.
Regards
David G
On 14/10/15 15:18, Lorenzo Marcantonio wrote:
On Wed, Oct 14, 2015 at 08:53:32AM +0200, Marco Ciampa wrote:
Have you done so
of the scripting hooks in it that are functional, the other has
dummy hooks that either do nothing, or raise errors as appropriate.
David G
On 03/10/15 23:56, Wayne Stambaugh wrote:
Shamelessly pilfered from the movie "Karate Kid",
build config tools rule #1: Always check for features, not
available variables. eg:
PopupMenu -> Path Variables ->
KISYS3DMOD - 3d Module Direcory
KIPROJMOD - Project directory
- User configured Library Path Variable
Regards
David G
On 28/0
On 01/09/2015 09:28, jp charras wrote:
Le 31/08/2015 21:25, David J S Briscoe a écrit :
I've just been playing with V6132 of PCBNEW. I have a number of small
observations.
1/ In the layer manager toolbar the Top and Bottom layer are named
Composant and Cuivre. Why is this even though I am
send in a few more observations next week as I start to use the
latest version more. Thanks.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad
Just thought I'd mention that necessary is misspelt on the Windows
installer set-up screen (R6132). I'd fix it myself if I could but don't
know how. Thanks.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad
All,
I agree with Tom.
A new dialog that allows definition of the layer stack with all
paramaters including dielectric characteristics would be preferable.
In the future we could use this information to auto calculate impedance
of striplines etc as well.
Regards
David
ends up implementing workarounds for advanced
features.
I've recently started trying to convince my team to code the dialogs by
hand. In my mind, with a little planning up front, hand coding the
dialog could be relatively quick.
David
On 8/13/2015 2:41 PM, Wayne Stambaugh wrote:
On 8/13/2015
multiple identical footprints exported to the gencad
file which your contract manufacturer will have to review.
Yes, you are right. The code isn't fresh in my mind so I will have to
review it to verify, but I think it covers this case. However, even if
it doesn't it's still a big improvement.
David
/master/src/KiCad/KiCad.adoc
Martin
On Sat, Jun 20, 2015 at 10:21 PM, Chris Pavlina pavlina.ch...@gmail.com wrote:
On Sat, Jun 20, 2015 at 09:14:14PM +0100, David J S Briscoe wrote:
[snip] I'm afraid I will screw up the files on Github so probably
better for me to do it the old fashioned way. Who
,
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
On 20/06/2015 21:00, Marco Ciampa wrote:
On Sat, Jun 20, 2015 at 08:22:23PM +0100, David J S Briscoe wrote:
I'm willing to have a look at some of the grammar in the English
documentation (some of it may be my fault anyway-I helped with the
original French to English translation ages ago).
How
On 17/01/2015 16:06, Nick Østergaard wrote:
I don't know about the glew error with winbuilder, but maybe you did
not install libwebkitgtk-dev on mint.
2015-01-17 13:40 GMT+01:00 David J S Briscoe da...@djsbriscoe.vispa.com:
I thought I'd give Kicad-Winbuilder 3.4.2.7 a try on Windows 7 as I
difference. I am able to open eagle board files with a text editor
and I see XML code so maybe there's still hope. Thanks.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe
.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
I added
#define HAVE_STRTOKR
just prior to the check in kicad_string.h.
I'm on Windows using TDM-GCC 4.8.1-3.
What is the correct check_symbol_exists() line to fix this problem?
Thanks,
David
___
Mailing list: https://launchpad.net/~kicad-developers
successfully.
David
On 3/10/2014 3:03 PM, jp charras wrote:
Le 10/03/2014 19:20, David Novak a écrit :
I built Glew using MinGW and the Kicad build is still failing to link
pcbnew, but the error messages are different.
[100%] Building CXX object
pcbnew/CMakeFiles/pcbnew.dir/__/common
,
David
[100%] Building CXX object
pcbnew/CMakeFiles/pcbnew.dir/__/common/base_units.cpp
.obj
Linking CXX executable pcbnew.exe
..\common\libgal.a(opengl_gal.cpp.obj):opengl_gal.cpp:(.text+0x2831):
undefined
reference to `_impGLEW_VERSION_2_1'
..\common\libgal.a(opengl_gal.cpp.obj
lib/glew32.dll src/glew.o
-L/mingw/lib -lglu32 -lopengl32 -lgdi32 -luser32 -lkernel32
ar cr lib/libglew32.a src/glew.o
In Cmake, I have
GLEW_GLEW_LIBRARY =glew-1.10.0/lib/libglew32.a
Any tips to help me figure out what I'm doing wrong?
David
On 3/10/2014 3:08 AM, jp charras wrote:
Le 10/03
.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
with the idea of using GerbMerge (written
in Python) but it is going to be painful to use. I would love to be able
to do this in my favourite tool (Kicad).
Is there any way I could come to some arrangement where I pay for this
work to be done.
It would make my life a lot easier. Any thoughts.
Thanks.
David
/CMakeFiles/bitmaps.dir/cpp_16/pinorient_right.cpp.obj
The build then terminated with the message
-- KiCad was NOT built successfully! Please view the logs
If you need any more info I will be pleased to supply it.
Thanks
David.
___
Mailing list
: https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
Altium uses confluence for their wiki
http://wiki.altium.com/display/ADOH/Home
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad
standard in my opinion.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
. I'd just like to use this opportunity to say thank you.
Anyway that's all for now. I will keep you all up to date with my
progress between now and September (when we hope it will be operational).
Regards,
David.
P.S One other problem is the persistence of custom design rules between
exporting
to end up with is a set of
numbers from which I can calculate the actual length and width of a PCB (in
inches (MILS) or mm). Can someone point me in the right direction? I would be
very grateful for any assistance offered.Thanks.
David
On 10/12/2011 14:58, Wayne Stambaugh wrote:
On 12/10/2011 7:54 AM, David J S Briscoe wrote:
Hi,
I've just posted this message to the kicad-users group
Hi,
Just tried to build kicad with the kicad-winbuilder script.
It fails with these messages in the following logs
http://www.linkedin.com/groups/Host-Your-Open-Source-Software-2221461.S.45833610
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More
On 25/01/2011 07:53, jean-pierre charras wrote:
Le 23/01/2011 18:13, David J S Briscoe a écrit :
I have just downloaded the latest release version RC4 and on trying to
install
the program I receive the message
KICAD INSTALLER HAS ENCOUNTERED A PROBLEM.
I am using WINXP PRO. I have
I have just downloaded the latest release version RC4 and on trying to
install
the program I receive the message
KICAD INSTALLER HAS ENCOUNTERED A PROBLEM.
I am using WINXP PRO. I have uninstalled the stable version of Kicad but
this
makes no difference.
David
To All,
Just thought I'd let everyone know that the kicad-devel group has been
closed today.
Thanks.
David.
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https
77 matches
Mail list logo
