Ok here is my latest problem I have.
I have 3 different sized boards and on the smallest board, I have created a
zone to cover the whole board, and that shows up perfectly on PCBNEW and in the
3D viewer. On my second board, which is larger, the xone again coners the
entire board, and shows up
--- In kicad-users@yahoogroups.com, hal8000b hal80...@... wrote:
--- In kicad-users@yahoogroups.com, andrwpodm andrwpodm@ wrote:
Ok. I had this problem before but after searching the messages for a
possible solution I thought I had found it, but to no avail. Everytime I
create
--- In kicad-users@yahoogroups.com, hal8000b hal80...@... wrote:
--- In kicad-users@yahoogroups.com, andrwpodm andrwpodm@ wrote:
For some reason, I cant get filled zones to show on my board in the 3D
viewer. Any reasons why? They dont even show as filled zones in PCBNEW,
which
--- In kicad-users@yahoogroups.com, Juan Gonzalez obij...@... wrote:
Hi,
I would like to share with you the Skypic board:
http://fotos.iearobotics.com/index.php?album=skypic-2009image=Skypic-2009-2.jpg
It is a rather an old PIC-based board, developed mainly for teaching
, but seems a bit more resource intensive and has
some UI issues that distract me. But that too is a solid product.
Donald.
- Original Message -
From: andrwpodm andrwp...@...
To: kicad-users@yahoogroups.com
Sent: Thursday, November 12, 2009 5:50:09 AM GMT -05:00 US/Canada Eastern
For some reason, I cant get filled zones to show on my board in the 3D viewer.
Any reasons why? They dont even show as filled zones in PCBNEW, which seems
odd, as I would of thought that they would do. Instead all I get is a the
outline of the zone and it doesnt change even after I fill it. I
Ok. I had this problem before but after searching the messages for a possible
solution I thought I had found it, but to no avail. Everytime I create a zone
and then try to fill it, PCBNew crashes.I have tried setting the dimensions in
inches and not mm, and left the clearance at 0.02 as stated
konfere...@... wrote:
Just right mouse button and then Text. As on logo on http://picaxe.cz
Milan
andrwpodm napsal(a):
Anyone know how to add text on parts in Wings3d??
I know this isnt probably the right place to ask, but I thought I would
give it a try, considering Kicad
I'd just like to say a BIG thank you to the guys who have very generously
worked very hard and spent loads of time creating the board modules, and 3d
images for Kicad. I take my hat off to you guys.
I'm slowly getting the hang of Kicad, and with these libraries, it has made my
project a
Anyone know how to add text on parts in Wings3d??
I know this isnt probably the right place to ask, but I thought I would give it
a try, considering Kicad works very well with Wings3d
Andy
The hierarchical key is on the right hand side of the Schematic editor page.
On your schematic, click on this tab, the click and hold the left mouse button
on an empty area of your schematic and it will draw a box. I dont know if it
matters how big it is. Once you have done this, then it will
On Thu, 15 Oct 2009 15:37:15 -
andrwpodm andrwp...@... wrote:
Hi all
Great program. Absolutely love it. Thought Eagle was good, but this is
truely amazing. Hats off to the guys who created it. I have a couple of
issues though that I hope you could answer for me.
Firstly, I am
12 matches
Mail list logo
