I did that, and this is the reason why I duplicated the soldermask
because I wanted to have pads on the both side!
Thanks a lot!!
// from iPhone
Le 18 mai 09 à 01:12, Joerg joerg...@analogconsultants.com a écrit :
Julien Bayle wrote:
thanks a lot :)
it is very clear to understand.
I
Thanks a lot!!
I'll test it asap!
It could be fine to put these informations in the pdf or elsewhere
Talk soon
// from iPhone
Le 17 mai 09 à 23:37, Brian Sidebotham brian.sidebot...@gmail.com a
écrit :
Hi Julien,
It looks like a problem with your designators. A while back a problem
was
wdoe999 a écrit :
I don't know if I'm doing something wrong, but...
I created 3 boards that have one or more vias on each. If I create a
drill file for each board, the drill file does contain all of the via
drill holes for that board. I then put the 3 boards onto one panel and
then
I tested it, it works FINE!
now, I'm going to post another question about ground zone and automatic trace
suppression ...
thanks again!
--- In kicad-users@yahoogroups.com, Julien julien.ba...@... wrote:
Thanks a lot!!
I'll test it asap!
It could be fine to put these informations in the
hi,
I create a pretty ground zone in order to suppress some tracks.
no problem for the zone creation. it is very well documented so..
BUT I have a little problem:
after the filling of the zone, it remains all the tracks existing between
the pads supposed to be connected to the zone.
I put a
--- In kicad-users@yahoogroups.com, Julien Bayle julien.ba...@... wrote:
hi,
I create a pretty ground zone in order to suppress some tracks.
no problem for the zone creation. it is very well documented so..
BUT I have a little problem:
after the filling of the zone, it remains all the