KR> Split elevator & Gap Seals for elevator/rudder

2016-05-30 Thread billjacobs...@yahoo.com
please see other KRnet info at http://www.krnet.org/info.htmlsee http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options -- next part -- An HTML attachment was scrubbed... URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160530/850cd43e/attachment.html>

KR> Split elevator & Gap Seals for elevator/rudder

2016-05-30 Thread Jeff Scott
?I built a removable split elevator with gap seals when I rebuilt the tail on my KR in 2005. There are some photos, although not very detailed at and . The gap seals are a single laminate of Carbon Fiber laid up

KR> Fuselage to wing fairings?

2016-05-30 Thread rbaalman at cox.net
rg/mailman/private/krnet_list.krnet.org/attachments/20160530/026cc29a/attachment.JPG> -- next part -- A non-text attachment was scrubbed... Name: roger 043.JPG Type: image/pjpeg Size: 25658 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet

KR> composite vacuum bagging?

2016-05-30 Thread Chris Prata
Youtube is your friend here... > To: krnet at list.krnet.org > Date: Mon, 30 May 2016 20:49:45 -0400 > Subject: KR> composite vacuum bagging? > From: krnet at list.krnet.org > CC: smcdonal at kos.net > > What do you consider the best book on vacuum bagging setups for dyi? > >

KR> composite how-to

2016-05-30 Thread rbaalman at cox.net
> Bill Jacobs wrote: > > What do you consider the best book on carbon fiber in a how to book > for dyi? > In addition to what Mark mentioned, when working with CF, it is stiff, but > when you use a heat gun or hair dryer on it and the resin, the CF lays out > nicely to about any curve and

KR> composite vacuum bagging?

2016-05-30 Thread Global Solutions
What do you consider the best book on vacuum bagging setups for dyi?

KR> elevator splice sketch enclosed (hopefully)

2016-05-30 Thread Mark Langford
ttp://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160530/08e73c7b/attachment.JPG>

KR> composite how-to

2016-05-30 Thread Mark Langford
Bill Jacobs wrote: > What do you consider the best book on carbon fiber in a how to book for dyi? I don't think I have a book specific to carbon fiber...it's done the same way as fiberglass...mix up epoxy, wet out the carbon fiber, and apply. The biggest difference is that carbon fiber is

KR> photos?

2016-05-30 Thread Larry Flesner
>One more try and I'm giving up and going flying. >Mark Langford +++ I hope you enjoyed the flight. :-) Larry Flesner

KR> Split elevator & Gap Seals for elevator/rudder

2016-05-30 Thread Mark Langford
Hmmm. Looks like I killed jpg enclosures last night while trying to enable HTML. Let's see if this fixes it. Hopefully, there's a jpg enclosed. But if not, I'm still working on it Mark Langford ML at N56ML.com http://www.n56ml.com

KR> Split elevator & Gap Seals for elevator/rudder

2016-05-30 Thread Mark Langford
Frank Hamelly wrote: > I want to use a split elevator on my KR and am wondering how to > attach the two halves in the middle to maintain structural integrity. > I've seen that Steve Anderson's KR used a split elevator but how were > the two sides fused? Steve's are joined something like the

KR> Split elevator & Gap Seals for elevator/rudder

2016-05-30 Thread Frank Hamelly
vance for the advice. Frank Hamelly -- next part -- An HTML attachment was scrubbed... URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160530/0cfb6f68/attachment.html>

KR> Split elevator & Gap Seals for elevator/rudder

2016-05-30 Thread Gary
sides bolt to the elevator spar(s) with one piece back up plate on rear side of spar(s)(not shown). Wood spar sawed in the middle. -- Gary Soli Deo Gloria -- next part -- An HTML attachment was scrubbed... URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160530/ebb133dd/attachment.html>