I'm fiber-glassing my main wings in cooler than normal temperatures for this
time of year. I'm using Aeropoxy. Should I be using a slower cure catalyst?
Joe Cruz
cruzj12 at frontiernet.net
KR1.5 N3151K
KR2S builder
My KR is stretched 24?inches so I may not need as much trim as some..
Larry my KR2-S is stretched another 18.75" farther aft of the rear spar. Yep
you read that right...extended one more bay plus four inches to the leading
edge of the vertical stabilizer spar -bulkhead.I think my KR2s is
?Is this a popularity vote or what? Responses like?this have nothing to do with
building and educating?builders like myself.One way or another we? get educated
here wether we like the tone or not. There is no such thing as a stupid
question when you ask for advice and simply don't know.
?
I am wondering how much Aeropoxy I will need for wing construction on my
KR2S. How much should I have on hand while laying up the fiberglass ? I plan
just one layer of glass at a time with peel-ply.Is there is a method to figure
how much to mix for a given area ? From previous experience
OK thanks Larry. Let me know what I owe you including shipping to area code
14883. J.Cruz, 60 crumtown road, spencer, ny 14883.
From: "Larry Flesner"
To: kr...@mylist.net
Sent: Wednesday, October 26, 2011 9:15:29 PM
Subject: KR> Gathering hats and shirts
This is for
To Al in Ansonia, CT, I was told you might be going to the KR gathering this
weekend. I'm looking to carpool with someone.I'm in Spencer. NY Let me know,
Thanks Joe 607-379-0780email: cruz...@frontiernet.net
Are there any car pools heading to the KR gathering from the north east?I'm
interested in joining one if available space, I just got back home Saturday
from a 1700 mile road trip from Spencer NY to Cameron, South Carolina and back.
Thanks, Joe
I need some advice on how to take care of rain water on my fuslage floor.
Thanks for all the feedback about my wet floor. By last evening the najority
of the wet floor had dried already from the wind blowing across it all day.
- Original Message -
From: "Tony Wright"
I need some advice on how to take care of rain water on my fuslage floor. I
purchased John Godwins KR2S project in South Carolina last Wednesday and had to
travel back to New York through the hurricane rain storms. Unfortunataely i
took on some rain water last night driving through Pensylvania.
Im going to do my best to attend this year's KR Gathering. Before I purchase a
commercial airfare I wanted to make sure that KSTL (St. Louise, MO) is
relatively near Mt. Vernon IL.
approx. 80 miles east of St Louise,MO
- Original Message -
From: "Marc Baca"
To:
John, I need your mailing address again..
- Original Message -
From: "John Godwin"
To: "KRnet"
Sent: Wednesday, June 22, 2011 11:10:31 AM
Subject: KR> KR2S 4 sale
Ok guys I had it up before and no takers, so here it is again. I'm going to
Craig,
I purchased the Henrob torch several years ago. It welds 4130 tube quite
well. Of course you have to practice on some small pieces before you go and
weld on and engine mount or push pull rods. I use 1/8" 4130 rod. It works very
well on auto body panels too. The small concentrated
Larry,
The gaps between the surfaces seemed a little to big.This was the first thing
I didn't like.
- Original Message -
From: "Larry Flesner"
To: "KRnet"
Sent: Tuesday, November 2, 2010 8:07:43 AM
Subject: Re: KR> Stabilizer and rudder
Larry, I was looking to purchase a KR2S , stock built for sale in Florida. The
builder used piano hinge on the rudder and elevator which I thought is
substandard and required replacing.
I'm looking for one to fly right now while I build on my own project.
Joe Cruz
- Original Message -
Steven, If you are talking about piano hinges on the elevator and rudder, I
would replace them, just my two cents. Joe
- Original Message -
From: "Steven Bedford"
To: kr...@mylist.net
Sent: Sunday, October 31, 2010 10:36:34 PM
Subject: KR> Stabilizer and rudder
I'm trying to register for next years gathering and I keep getting Internal
Server Error. Is the problem on my end? Maybe it's too early to register?
I have to say it was the most fulfilling experience and fun time spent around
builders and pilots of the KR aircraft. Everyone has something to
To all of you who have used "micro" consisting of epoxy and glass balloons for
smoothing and filling the wing surfaces, a question:
Mix to a consistancy like tooth paste. It sands easilly too.
- Original Message -
From: "Neal Hornung"
To: kr...@mylist.net
Patrick,
I have a dual stick setup I salvaged from my first KR2 build. I will take
photos of the entire setup and email you off the net. I have no use for it
because my project is a single seat KR2 with side a stick.
- Original Message -
From: "Patrick and Robin Russo"
oops! I meant to send to Joe and Mary Ferraro
- Original Message -
From: cruz...@frontiernet.net
To: "KRnet" <kr...@mylist.net>
Sent: Thursday, September 16, 2010 8:30:57 PM
Subject: Re: KR> RE: Marty Roberts' KR-2 with O-200 For Sale
I am interested in the KR for sa
I am interested in the KR for sale. Can you give me some information about the
plane? empty weight, maybe some photos? thank you, Joe Cruz, Spencer,NY
- Original Message -
From: "Joe and Mary Ferraro"
To: kr...@mylist.net
Sent: Friday, September 10, 2010 2:41:48 AM
Russ, are photos available? Thanks, Joe
- Original Message -
From: "Russ Keith"
To: "KRnet"
Sent: Thursday, August 26, 2010 2:30:05 AM
Subject: RE: KR> KR2 Retract Landing Gear
I have a KR1 project with a VW installed for sale. It is not complete
I thought I was responding to the seller not the KR netsorry
- Original Message -
From: cruz...@frontiernet.net
To: "KRnet" <kr...@mylist.net>
Sent: Wednesday, July 28, 2010 7:50:40 AM
Subject: Re: KR> Parts value
I am interested intwo items below. Can you te
I am interested intwo items below. Can you tell me what you want for these
items with shipping to USA zip code 14883. Thanks Joe Cruz
1) Fiberglass landing gear legs and front gear strut with oleo for tricycle
gear
2) AS 5046 wings ...$?
- Original Message -
From: pi...@mts.net
To:
james,
What are you asking for the smoke canopy ,canapy frame and turtle deck?
Thanks ,Joe
- Original Message -
From: "Jim Sellars"
To: "Daniel Root" , "KRnet"
Sent: Thursday, May 20, 2010 8:22:17 AM
Subject: RE: KR> KR2
24 matches
Mail list logo