KR> Engine and cowling

2008-10-12 Thread Mark Langford
Brian Kraut wrote: > Can anyone tell me if a Corvair fits in the normal > Rand cowl or should I sell the cowl and start from scratch? There might be something helpful at http://home.hiwaay.net/~langford/corvair/mount_fit.html or http://home.hiwaay.net/~langford/cowling.html . Mark Langford,

KR> Engine and cowling/bent spars

2008-10-12 Thread Brian Kraut
, 2004 9:24 PM To: KRnet Subject: Re: KR> Engine and cowling Brian Kraut wrote: > Can anyone tell me if a Corvair fits in the normal > Rand cowl or should I sell the cowl and start from scratch? There might be something helpful at http://home.hiwaay.net/~langford/corvair/mount_fit.htm

KR> Engine and cowling/bent spars

2008-10-12 Thread Mark Langford
Brian Kraut wrote: > Did you come up with some clever way of getting a bent spar into > the spar holes with the plywood already installed or would you put in the > spar and then ply the sides? I never thought of that, but that wouldn't stop me from doing it. I'd probably cut a big enough slot

KR> Engine and cowling

2008-10-12 Thread Joseph H Horton
Can anyone tell me if a Corvair fits in the > normal > Rand cowl or should I sell the cowl and start from scratch? > > Brian Kraut Brian- I have mine just about finished fitting. The corvair fits in the cowl fine. I did not mill the intakes off so I will have the bumps on top. I also used Mark

KR> Engine and cowling

2008-10-12 Thread Brian Kraut
[mailto:krnet-bounces+brian.kraut=engalt@mylist.net]On Behalf Of Joseph H Horton Sent: Friday, May 14, 2004 8:31 PM To: kr...@mylist.net Subject: Re: KR> Engine and cowling Can anyone tell me if a Corvair fits in the > normal > Rand cowl or should I sell the cowl and start from scratch? > &

KR> Engine and cowling

2008-10-12 Thread John Bouyea
. It sure was easy! John Bouyea KR2 - hanging the engine accessories KR2S - boat hanging from the rafters john_0...@bouyea.net www.bouyea.net From: "Brian Kraut" <brian.kr...@engalt.com> Subject: RE: KR> Engine and cowling I was thinking that I could put the two cowl halves togeth

KR> Engine and cowling

2008-10-12 Thread Brian Kraut
ssage- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of John Bouyea Sent: Saturday, May 15, 2004 12:28 AM To: KRNet Subject: RE: KR> Engine and cowling Hi Brian, I laid-up glass over the outside of an assembled cowl and made a female mold. The resulting parts l