I left all my new Mooney Plexiglas pieces covered in Spray Lat up in the
loft of a hangar for a couple of Georgia summers years ago and had the same
trouble trying to get the stuff off. After trying every type of cleaner
know to man it seemed, and not having great luck with heat
and now it has whitener ;)
- Original Message -
From: "Patrick Driscoll" <patric...@usfamily.net>
To: "KRnet" <kr...@mylist.net>
Sent: Thursday, June 25, 2009 12:46:22 AM GMT -05:00 US/Canada Eastern
Subject: Re: KR> Plexiglas Spray Lat Removal
24, 2009 11:52 PM
Subject: Re: KR> Plexiglas Spray Lat Removal
On the subject, mine is also RR 1997, but I have a nice scratch in the
center, fairly deep appx. 1" long. Anyone have a way to fix it?
Jack wrote: You may want to try a micromesh kit. You should be able to get
it from Wicks or Spruce.
For a very fine finish, try polishing with Colgate tooth paste. We used to
use it back in the 50's to polish radio crystals to their final frequency.
Patrick Driscoll
aint Paul, MN
las Spray Lat Removal
You may want to try a micromesh kit. You should be able to get it from Wicks
or Spruce.
Jack
- Original Message -
From: mplane...@aol.com
To: kr...@mylist.net
Sent: Wednesday, June 24, 2009 6:52:46 PM GMT -05:00 US/Canada Eastern
Subject: Re: KR> Plexiglas
You may want to try a micromesh kit. You should be able to get it from Wicks or
Spruce.
Jack
- Original Message -
From: mplane...@aol.com
To: kr...@mylist.net
Sent: Wednesday, June 24, 2009 6:52:46 PM GMT -05:00 US/Canada Eastern
Subject: Re: KR> Plexiglas Spray Lat Remo
Wet sanding. All the way down to 2000 grit sand paper. And do it by hand so
you don't build up heat. My brother had to do that on John parker's Thunder
mustang after every race season.
Fred Johnson
Reno, NV
mplane...@aol.com wrote:
On the subject, mine is also RR 1997, but I have a nice
On the subject, mine is also RR 1997, but I have a nice scratch in the center,
fairly deep appx. 1" long. Anyone have a way to fix it?
This past weekend I removed the Spray Lat coating on the Plexiglas
canopy on my KR-2.
I had heard and read all manner of horror stories about leaving the
coating on too long and how difficult to impossible this task was going
to be. Sure enough after a couple hours of tedious picking at the
9 matches
Mail list logo
