KR> Ballast weight installation

Geday Larry That's because moving a wing around as per the discussion is complicated!!!. Just moving a weight around is simple by comparison as you say but with 49 lbs in the nose involved in this case I reckon it should be looked at by a professional.anyhow that's it from me. Regards John

KR> Xpdr antenne

Kr friend, I want to install a xpdr antenne, I have learned to install this antenne under the Seat because of the high transmission power. I have learned to that I can buy a alluminium plate to make a grounding plate And to shielded off your BU. Does somebody know what are the dimensions

KR> Com antenne

Hi, We need to install also the com antenne. Does somebody have a good picture on his webside how to install the com antenne. I passend the stage of Mark L to use the rudder idea. Whe have the intention to build it just below the bagage shelf. Any pics would be great. Stef -- Steph and his dad

KR> Xpdr antenne

The plate can be almost any size. It can be round, square or rectangular as fits the available space, but should be large enough that the radiated energy will be reflected off the plate and not enter the cockpit. Imagine a light bulb in place of the antenna, and making a shield to stop the

KR> Ballast weight installation

I built a standard KR2 in the '80's -No elevator balance weights -front fuel tank-Revmaster on a standard mount. The c of g worked out OK-even with empty fuel tank. Mac G-BVZJ On Wed, May 13, 2015 at 2:11 AM, Adam Tippin via KRnet wrote: > Sid is there any other electronic devices?. ant. ELT,

KR> Canopy hinge

Yep, I knew that - I stand corrected, Sorry-- but the question was are there other canopy options for PAul to consider and the answer is a resounding yes. Joe Horton - Original Message - From: "bjoenunley via KRnet" To: "n357cj via KRnet" Cc: "bjoenunley" Sent: Tuesday, May 12, 2015

KR> KRnet Digest, Vol 3, Issue 119

Canopy hinge, Hi Paul. My canopy is hinged at one hinge on the front. You can climb in and work on the plane also if necessary from both sides. If you leave the canopy open and try to take off, the canopy gets sucked open about 1 inch but then blown down in equilibrium. I did tests to see what

KR> Kr 2s plans

All, I to have been waiting for my KR2S plans since my confirmation email that was received on 02/03/2015. I have written 2 emails to nVareo but no response. Given this service, it is very unlikely I will order anything else from them. Regards Earl Klinker On 5/12/2015 9:05 PM, Global

KR> KRnet Digest, Vol 3, Issue 119

If you're concerned about getting a front-hinged canopy out of the way in a hurry should you need to bail out, you may want to look at the "emergency quick-release" jettison setup on a factory Pitts with the two-place bubble. It's side-hinged, but the concept would be the same. Basically, the

KR> Kr 2s plans

http://www.nvaero.com/blog/parts-and-plans-availability/ Long story short, you will get your plans. Chris Pryce Burlington, NJ On Wed, May 13, 2015 at 7:27 AM, Earl Klinker via KRnet < krnet at list.krnet.org> wrote: > All, > > I to have been waiting for my KR2S plans since my confirmation

KR> Kr 2s plans

All, this topic seams to pop up every now and then. Although NvAero sells the plans Mrs Rand owns and distributes the drawings. Not the best situation but you will get your plans. Try not to get frustrated with NvAero. There is no doubt Steve is working to fill your order. Hope to see you all

KR> Canopy hinge

Just reminded me2 side hinged canopies that I know of , opened in flight with really bad consequences -i.a total write off and near fatal. Mac Wood On Wed, May 13, 2015 at 10:22 AM, n357cj via KRnet wrote: > Yep, I knew that - I stand corrected, Sorry-- but the question was are > there

KR> Xpdr antenne

t; Steph and his dad are building the KR-2S see > > http://www.masttotaalconcept.nl/kr2 -- next part -- A non-text attachment was scrubbed... Name: xpond.jpg Type: image/jpeg Size: 21386 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20150513/6613c790/attachment.jpg>

KR> Canopy hinge

List-Post: krnet@list.krnet.org Date: May 13,2015 Subject: Canopy hinge location Joe; When I was starting to test my Kr-2, stock built with initial canopy mount on the right side, I experienced a mishap which ended up costing me a new canopy and many more hours of work to repair. I was

KR> Canopy hinge

One I was told about by the builder in W Australia.He taxied out with his side mounted canopy int the part latched position to get some airflow thru the cockpit. Forgot about it till he took off, and became aware of it by the extra noise. Tried to close it but the lift generated by the canopy

KR> Canopy Hinge

I agree with everyone that a forward hinged canopy is safest and a better idea for several other reasons (although a rear-sliding canopy is probably even better). Mine is side-hinged but I've never had any incidents with it. One reason perhaps is I have a printed question on the lip of the panel

KR> KR 2s plans

>From what I've observed over time, I'm pretty sure it's not Steve that's the hold up when it comes to getting plans. Jeannette has her own inscrutible and fickle schedule when it comes to getting plans printed and sent and that's the way it's always been as long as I can remember. Mike KSEE

KR> Xpdr antenna

> "Does somebody know what are the dimensions And thickness of that round alluminium plate? This should be easy to make it your self." Yep. Very easy. I cut out the bottom of an aluminum pie plate. It's worked well. Be sure and keep the antenna clean. Mounted below it picks up exhaust

KR> Xpdr antenna

According to AeroElectric Connection p 13-11, transponder ground plane of 5 1/2 inch diameter is sufficient. Thickness should be sufficient to support the antenna and cable attached to BNC. Gary Soli Deo Gloria -Original Message- From: KRnet [mailto:krnet-bounces at list.krnet.org]

KR> member of family is moving

2h 22m from my home in Alcoa, Tn. Would you be willing to give me a show and tell. Would love to see one assembled in person. Adam Tippin KR2S > On May 13, 2015, at 7:44 PM, Robert Pesak via KRnet > wrote: > > HI everybody,I just got home with the trailer that I'm using to transport >

KR> member of family is moving

Sure thing Adam Sent via the Samsung GALAXY S? 5, an AT 4G LTE smartphone Original message From: Adam Tippin List-Post: krnet@list.krnet.org Date:05/13/2015 6:58 PM (GMT-06:00) To: Robert Pesak , KRnet Subject: Re: KR> member of family is moving 2h 22m from my home

KR> Com antenne

Elt Antenna and Com Antenna http://krbuilder.org/Electrical/index.html Don't know if this is "how to", but it is how I did it. Actual antenna is simply mounted on the turtle deck. See N64KR at http://KRBuilder.org - Then click on the pics 2015 KR Gathering

KR> member of family is moving

You will and this is just the group to help you thru it. I was there once and regretted it so much that I built another one. See N64KR at http://KRBuilder.org - Then click on the pics 2015 KR Gathering - McMinnville, OR. September 3 - 6 -- See U There. Peoples

KR> Ballast weight installation

I feel much better now! See N64KR at http://KRBuilder.org - Then click on the pics 2015 KR Gathering - McMinnville, OR. September 3 - 6 -- See U There. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon,

KR> Ballast weight installation

Congratulations.? Joe Sent from my Verizon Wireless 4G LTE smartphone Original message From: Sid Wood via KRnet Date:05/13/2015 4:24 PM (GMT-06:00) To: krnet at list.krnet.org Cc: Sid Wood Subject: Re: KR> Ballast weight installation Just now got back from the airport