KR> KR parts for sale

We have a VW type IV engine (complete except for the jugs and pistons) for sale. Asking $600.00 but willing to talk! Located near San Diego (El Cajon) I have pictures and will send them to anyone interested Bill Masquelier

KR> KR parts

Need contact information Sent from my iPhone > On Feb 28, 2015, at 1:18 PM, Raymond Fuenzalida via KRnet list.krnet.org> wrote: > Wing skins > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet,

KR> KR Parts for Sale

On 3/9/2013 12:48 PM, Oscar Zuniga wrote: > These buy/sell negotiations should probably be done privately. Not that > there's a huge amount of traffic on the list though. > > The only thing about these buy/sell deals that may be of interest to the rest > of us is if you arrange for a

KR> KR Parts for Sale

These buy/sell negotiations should probably be done privately. Not that there's a huge amount of traffic on the list though. The only thing about these buy/sell deals that may be of interest to the rest of us is if you arrange for a purchase and want to see if someone on the list might be

KR> KR Parts for Sale

Hi, Is it the standard KR tailwheel and spring you have? Jamie Sent from Samsung Galaxy NoteSteve and Janet Henderson wrote:Hello, I have not been on this list for a few years, but I am back to sell some parts that I have. I will be posting a web page tomorrow with pictures of what I

KR> KR Parts for Sale

Hello, I have not been on this list for a few years, but I am back to sell some parts that I have. I will be posting a web page tomorrow with pictures of what I have for sale, and I have included a list of some of the parts for sale below. I have more parts in my shed, and will be getting more

KR> KR parts for sale

Phil Visconti is selling his KR parts. You can reach him at: pjvis...@juno.com KR2 Items for Sale 1. Revmaster 2100D Engine : Zero Hours 2. Revmaster Engine Mount 3. Quickie 2 Wood Prop: 56 in Dia 45 deg Pitch 4. Spinner 5. Cowling 6. Boat Stage plus builder's log 7. Wing

KR> KR parts

Netters The corvair stuff has been sold. I still have a KR2 sitting on dehl landing gear (no wheel or brakes) and no engine. The wings are complete. And a KR2S boat stage with center spars installed and wings spars built for the AS5048 airfoil. If anyone is interest send me an email,make me a

KR> KR Parts / engine mount spacers

Larry, I'll check my catalog. Thanks for the advise. Bill Page boliverp...@bellsouth.net - Original Message - From: "Larry H." <lah...@yahoo.com> To: "KRnet" <kr...@mylist.net> Sent: Wednesday, October 04, 2006 9:26 AM Subject: KR> KR Parts / engi

KR> KR Parts / engine mount spacers

I think Dan just called them aluminum spools before, he may custom make them I do not know. You just place the 2" spool between the engine mount and the back of engine case or Diehl case that the engine is bolted to. These spools were for VW eningines I believe, but it may not matter if it is a

KR> KR Parts / engine mount spacers

The second pic shows the 2" round aluminum spools used for spacers on my engine. http://krbuilder.org/EngineMeasurements/index.html See N64KR at http://KRBuilder.org - Then click on the pics See you at the 2007 - KR Gathering There is a time for building and a time for FLYING and the time for

Réf. : KR> KR Parts / engine mount

Cloud" Canberra, Australia Larry Flesner <fles...@verizon.net> Envoyé par : krnet-boun...@mylist.net 04/10/2006 15:25 Veuillez répondre à KRnet Remis le : 04/10/2006 15:25 Pour : KRnet <kr...@mylist.net> cc :(ccc : Serge VIDAL/DNSA/SAGEM) Objet : KR>

KR> KR Parts

Does anyone have rough sketch of a Corvair motor mount with the demenotions ( tube length width at the tie downs? Thanks Ray Lee KR2 9763

KR> KR Parts

dbiker...@aol.com Sent: Wednesday, October 04, 2006 9:26 PM To: kr...@mylist.net Subject: Re: KR> KR Parts Does anyone have rough sketch of a Corvair motor mount with the demenotions ( tube length width at the tie downs? Thanks Ray Lee KR2 9763 ___ Search

KR> KR Parts / engine mount spacers

Yes we have a digital logo. I can E-mail Lee

KR> KR Parts

I bought a KR2 project a while back and it came with some new VW parts, I have a KR/VW motor mount that cost $252.00 and a VW prop hub that cost $139.00 I'll sell them both for $300.00 both are new unused. I'm going with a Corvair and can't use them. If anyone has one it also came with an

KR> KR Parts

. Bill Page boliverp...@bellsouth.net - Original Message - From: <oldbiker...@aol.com> To: <kr...@mylist.net> Sent: Tuesday, October 03, 2006 9:30 PM Subject: KR> KR Parts >I bought a KR2 project a while back and it came with some new VW parts, I > have a KR/VW

KR> KR Parts / engine mount

At 07:57 AM 10/4/2006, you wrote: >I am going >to have to extend my engine further forward about 2 inches >Bill Page If you can't find the proper engine mount you may be able to add a 1 inch spacer at the firewall and a 1 inch spacer at the engine.

KR> KR Parts / engine mount

Thanks, I did not think about that method. Bill Page boliverp...@bellsouth.net - Original Message - From: "Larry Flesner" <fles...@verizon.net> To: "KRnet" <kr...@mylist.net> Sent: Wednesday, October 04, 2006 8:25 AM Subject: KR> KR Parts / engine m

KR> KR parts needed

oo.com> To: "KRnet" <kr...@mylist.net> Sent: Wednesday, August 09, 2006 10:18 PM Subject: KR> KR parts needed > I am in need of the following parts: > > canopy, tinted or clear. > > lower cowling (or if necessary the whole cowling) for > VW engine install

KR> KR parts needed

I am in need of the following parts: canopy, tinted or clear. lower cowling (or if necessary the whole cowling) for VW engine installation. Prop for 2180 VW. Spinner and backing plate. If you have these parts and want to sell them or give them away, please contact me off=list!! Or, if you

KR> KR PARTS

Greetings everyone. I have the wing ribs that were made from the plans. I had them done professionally however I've since have in stalled the Diel wing skins The ribs were never used and are in good shape I also have the KR mechanicai brakes anyone interested make me a fair offer plus the

KR> KR Parts

nversions.com> > To: <kr...@mylist.net> > Sent: Saturday, January 21, 2006 9:19 AM > Subject: KR> KR Parts > > >> Guys, >> I have two started KR's in the hanger that we are going faster than >> the speed of smell on. I have an aluminum fab shop here in the 150 x &

KR> KR Parts

;bo...@hatconversions.com> To: "KRnet" <kr...@mylist.net> Sent: Saturday, January 21, 2006 6:57 PM Subject: Re: KR> KR Parts > > > > > I'm better at aluminum work than screwing with computers. > > > Bobby, >> You should establish a web site showing

KR> KR Parts

tconversions.com> > To: "KRnet" <kr...@mylist.net> > Sent: Saturday, January 21, 2006 6:57 PM > Subject: Re: KR> KR Parts > > >> > >> >> >> I'm better at aluminum work than screwing with computers. >> >> >> Bobby, >>>

KR> KR Parts

Guys, I have two started KR's in the hanger that we are going faster than the speed of smell on. I have an aluminum fab shop here in the 150 x 50 hanger we just built on a private strip south of Pueblo. While I am gearing up to build the aluminum parts for these things, it's easy to build

KR> KR Parts

Bobby, You should establish a web site showing everything that you have to sell that is KR related and include the prices. Bob Stone - Original Message - From: <bo...@hatconversions.com> To: <kr...@mylist.net> Sent: Saturday, January 21, 2006 9:19 AM Subject: KR> KR

KR> KR parts

I had a conversation with Ken Boyer today who is very good when it comes to the manufacture of aircraft parts. Mostly non-structural items such as wheel pants, engine cowlings, turtle decks, front decks ect... He has spent years working for Sabre-Liner on a number of their fiber glassing

KR> KR Parts for sale: Was Sad Tale...

Hello all. Thanks for all the letters and inquiries I have had. I think I got back with everyone who contacted me off-line, but if I didn't, I apologize. I finally got done with a brief catalog of what is on the project, excluding the little stuff. I posted it here, along with photos. Does

KR> KR Parts for Sale

I have the following parts for sale: Nose Gear with Nose Gear Wheel and Tire $280 KR2S Rudder Pedal Assembly $80 KR2S Tail Surface Hinges $75 KR2S Canopy Latches $15 Garmin GPS/Com Combination GPS Receiver and VHF Communications Transceiver with with Universal Yoke Mount. Original price

KR> KR parts for sale on Barnstormers

Hey guys, I'm passing this along to anyone interested. I came across this on Barnstormers.com. I saw a pic of the completed airframe, it is sitting on top of a church. Yes, a church. EXPERIMENTAL KR-2S HOMEBUILT PARTS ONLY . $2,200 . PARTS FOR SALE . Here Is a Great Opportunity to get Parts

KR> KR Parts For Sale

2004 9:52 PM Subject: KR> KR Parts For Sale I have the following KR parts for sale: Bendix TR-2061 Transponder w/altitude Reporter (used). Original cost $295; asking $200. I am located in Northern California about an hour north of Sacramento. Email questions to douglas_do

KR> KR Parts For Sale

I have the following KR parts for sale: KR2S Premolded Top Deck Package. Original cost $1935; asking $1400. KR2S Premolded Cowling. Original cost $415; asking $250. Rand Robinson Premolded Header Fuel Tank. Original cost $285; asking $180. Vertical Card Compass. Original cost $189; asking

KR> KR parts for sale

JW wrote:Hey Justin, Sorry to hear you are giving up. I would be interested in your Corvair engine. I live in Cypress Ca. which I think is right up the road from you. I am off tomorrow, tuesday. Give me a call at work, leave me amessage with the receptionist if I'm not

KR> KR parts for sale

To KR NET, I have decided to give up building an airplane. I just cant possibly do it with school,pilot training and a full-time job. Anyways I have: Wing Spars complete (RAF48) done with perfection, full photo's of their building. A corvair that was partially torn down with only the front

KR> KR Parts

To KR NET, I have decided to give up building an airplane. I just cant possibly do it with school,pilot training and a full-time job. Anyways I have: Wing Spars complete (RAF48) done with perfection, full photo's of their building. A corvair that was partially torn down with only the front

KR> KR parts for sale

Justin don't give up. I have been working on my Kr of an on for 20 years It is good to work with your hands if you have a high pressure job. Your Kr will never get jealous. You can hang it from the ceiling when you do not have time for it and it will give you great insight into the the

KR> KR parts for sale

on the boat this would proubly be another story. Justin - Original Message - From: <babyw...@aol.com> To: <kr...@mylist.net> Sent: Wednesday, June 16, 2004 6:27 PM Subject: Re: KR> KR parts for sale > Justin don't give up. I have been working on my Kr of an on for 20

KR> KR parts still for sale

I have a new set of Diehl wing skins for sale still in the original crate with the video. The price from Dan is $1,800 for the skins, $50 for crating, and $30 for the video. I will sell them for $1,600 plus shipping. They will ship from Jacksonville, FL, or they can be picked up. I also have a

KR> KR parts still for sale

m> To: "KRnet" <kr...@mylist.net> Sent: Friday, May 14, 2004 9:47 PM Subject: KR> KR parts still for sale > I have a new set of Diehl wing skins for sale still in the original crate > with the video. The price from Dan is $1,800 for the skins, $50 for > crati

KR> KR parts still for sale

Sorry, didn't mean to put that on the net, Please reply off the net, thanks, Justin - Original Message - From: "JW" <jmw...@socal.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Sunday, May 16, 2004 12:01 PM Subject: Re: KR> KR parts still for sale &g

KR>KR Parts

Dean, I could not get your link to work, I have some parts you may be interested in. Mike saunder...@charter.net - Original Message - From: "Dean Cooper" <dean_coo...@msn.com> To: <kr...@mylist.net> Sent: Sunday, October 05, 2003 9:53 AM Subject: KR>KR Parts

KR>KR Parts

Netters, If anyone has any KR2 parts they are looking to sell (ie, canopy, turtledeck, controls, wing skins, gear, fuel tank, etc.), please email me off-net at dean_coo...@msn.com. Thanks. Dean Cooper Jacksonville, FL

KR>KR Parts

I saw a KR for sale on ebay with parts - he has a phone number you can call. - Original Message - From: Dean Cooper <dean_coo...@msn.com> To: <kr...@mylist.net> Sent: Sunday, October 05, 2003 9:53 AM Subject: KR>KR Parts Netters, If anyone has any KR2 parts they are look

KR>KR Parts For Sale

LARRY DO YOU STILL HAVE PARTS FOR SALE? DAVE --- Larry A Capps wrote: > KR Parts For Sale - pictures available > > - HAPI 1835cc dual ignition engine w/ Starter (2 > hrs run time) $1,800 > > - Exhaust system $100 > > - Two props. (climb and cruise) $150 > >

KR>KR Parts For Sale

- From: "David Hartz" <dewrenc...@yahoo.com> To: <larry.ca...@comcast.net>; "KR builders and pilots" <kr...@mylist.net> Sent: Wednesday, July 23, 2003 5:44 AM Subject: Re: KR>KR Parts For Sale > LARRY > DO YOU STILL HAVE PARTS FOR SALE? > DAVE &

KR>KR Parts For Sale

KR Parts For Sale - pictures available - HAPI 1835cc dual ignition engine w/ Starter (2 hrs run time) $1,800 - Exhaust system $100 - Two props. (climb and cruise) $150 - Fixed Landing Gear w/ 500 tires and hydraulic breaks $100 - Posa Carb. and spinner $75 - Stainless steel