Al
At 19:23 17.11.2003 -0500, ALParada wrote:
Hello, I'm trying to get Bering 1.2 to boot from the CD. I would also
like to keep a few packages on the floppy since I'm not finished with
them yet and i'm still making changes. I have gotten as far as getting
the CD to boot and I have a working
Hi all,
I've got the Truemobile 1100 series (prism2 based) card
working fine with the airo drivers on Bering. I'm wondering, has anyone had
any success using this card with the HostAP drivers? It would make the 25
cards that I bought accidentally
much more useful ;)
I have managed to get two
ALParada wrote:
Hello, I'm trying to get Bering 1.2 to boot from the CD. I would also
like to keep a few packages on the floppy since I'm not finished with
them yet and i'm still making changes. I have gotten as far as getting
the CD to boot and I have a working config just like the floopies.
I think there may be a bug in Bering-uClibc_2.0-rc2. I am currently still
working through this IPSec configuration and I discovered the following
warning when IPSec loads on boot up:
snip
/proc/sys/net/ipv4/conf/eth0/rp_filter = '1', should be 0.
snip
I did as I was asked in the procedure:
On Tue, 2003-11-18 at 13:03, Troy Aden wrote:
I think there may be a bug in Bering-uClibc_2.0-rc2. I am currently still
working through this IPSec configuration and I discovered the following
warning when IPSec loads on boot up:
snip
/proc/sys/net/ipv4/conf/eth0/rp_filter = '1', should be
Looks like I finally got it booting from the floppies. I do however,
have two errors: I am getting an error just before the login prompt: cp:
unable to close '/etc/dnscache/root/servers/@' : No space left on
device. When I try to restart dnscache I get the same error. When I
ps -aux, dnscache
Greetings !
I am investigating the possibility of using a number of Bering 1.2 routers
to create a wi-fi back-bone, and i was wondering if anyone has any
experience on this.
Since several of the boxes will be connected with more than one interfaces
(i.e cards) routing becomes an issue.
The
I never used Bering with HostAP mode in real live ..because it's hard to
find Prism-Based Card in indonesia.
But I used to run 4 wifi repeater.
I used bering and Zebra at each repeater.
Each bering box have 2 interface in it.
One interface is Orinoco Wifi Card ... facing a AP-1000 center repeater.
David,
Check that the voltage of the card is set correctly.
I had a similar problem with an Ingenius card when used in HostAP mode.
Stelios
http://www.stelioscellar.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dave Hunt
Sent: Tuesday,
Today, November 18th 2003, the Bering-uClibc team releases
Bering-uClibc 2.0
After six month of development, various betas and release candidates
we believe it's ready to hit the streets.
As usual it can be downloaded from the FRS area:
http://sourceforge.net/project/showfiles.php?group_id=13751
10 matches
Mail list logo