Hello!
Upon selecting iptables-mod-nfqueue and iptables-mod-nflog, LEDE 17.01
no longer builds.
The following error occours:
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
for kmod-ipt-nflog:
* kmod-nfnetlink *
* opkg_install_cmd: Cannot install packag
On 04/06/2017 05:45 AM, Joe Ayers wrote:
> Matthias, was there ever a conclusion to this post:
> http://lists.infradead.org/pipermail/linux-mtd/2016-March/066348.html
> ?
>
> My interest from http://www.aredn.org is support for Ubiquiti
> PBE-M5-620 and I suspect this issue is related.
>
> [ 0.5
On Thu, Apr 6, 2017 at 4:10 PM, Martin Tippmann wrote:
> Hi, build seems to fail when Imagebuilder is selected - seems related
> to u-boot but I'm not sure where the error is. Tested with fresh
> checkout on Ubuntu 16.04 + up to date Arch Linux, build fails with the
> same problem.
Wow that was f
On 2017-04-06 16:10, Martin Tippmann wrote:
> Hi, build seems to fail when Imagebuilder is selected - seems related
> to u-boot but I'm not sure where the error is. Tested with fresh
> checkout on Ubuntu 16.04 + up to date Arch Linux, build fails with the
> same problem.
I just pushed a fix, please
Hi, build seems to fail when Imagebuilder is selected - seems related
to u-boot but I'm not sure where the error is. Tested with fresh
checkout on Ubuntu 16.04 + up to date Arch Linux, build fails with the
same problem.
...
make -C tools all
make[5]: Entering directory
'/home/riso3860/source/build
Thanks for the info.
The systematics for the generation of the build config from the makefiles is
still quite obscure to me. A wiki lemma that puts some light in this would be
welcome; once I do understand I may write one.
See my questions/comments/replies in-line below.
Ciao,
Paul
> Op 6 apr
Hello to all.
Can anyone tell me if the Raspberry Pi 3 wireless module is capable of
entering in monitor mode?
I have been reading some documentation related to the Broadcom 43430
fullmac firmware at
https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 but I
could not understand if monitor
Hello Paul,
On 05.04.2017 23:23, Paul Oranje wrote:
Hello,
I’m wondering how to make LEDE build automatically an initramfs image (for use with
u-boot tftp recovery boot), when the ENH200EXT is selected as the target device. By
setting "CONFIG_TARGET_ROOTFS_INITRAMFS=y" a working image is buil