Hi Piotr,
This is going to end up in a fairly steep learning proces for me, so it may
take up a little more time; so when this small project may wait for your input
so now and then, should not be a real problem. Still, solving this one might
further a few other ones.
As, usually see replies/qu
Hello Paul,
Sorry for a late reply.
On 06.04.2017 14:24, Paul Oranje wrote:
Thanks for the info.
The systematics for the generation of the build config from the makefiles is
still quite obscure to me. A wiki lemma that puts some light in this would be
welcome; once I do understand I may write
Thanks for the info.
The systematics for the generation of the build config from the makefiles is
still quite obscure to me. A wiki lemma that puts some light in this would be
welcome; once I do understand I may write one.
See my questions/comments/replies in-line below.
Ciao,
Paul
> Op 6 apr
Hello Paul,
On 05.04.2017 23:23, Paul Oranje wrote:
Hello,
I’m wondering how to make LEDE build automatically an initramfs image (for use with
u-boot tftp recovery boot), when the ENH200EXT is selected as the target device. By
setting "CONFIG_TARGET_ROOTFS_INITRAMFS=y" a working image is buil
Hello,
I’m wondering how to make LEDE build automatically an initramfs image (for use
with u-boot tftp recovery boot), when the ENH200EXT is selected as the target
device. By setting "CONFIG_TARGET_ROOTFS_INITRAMFS=y" a working image is build
that can be tftp-booted alright, but I would prefer
See comments/questions inline below.
--
Paul Oranje
> Op 1 apr. 2017, om 02:00 heeft Daniel Golle het
> volgende geschreven:
>
> Hi Paul,
>
> On Fri, Mar 31, 2017 at 10:38:39PM +0200, Paul Oranje wrote:
>> This POE access point suited for outside usage needs an external antenna.
>> According
Hi Paul,
On Fri, Mar 31, 2017 at 10:38:39PM +0200, Paul Oranje wrote:
> This POE access point suited for outside usage needs an external antenna.
> According FCC documentation the ENH200EXT (needs external antenna) and the
> ENH200 (with internal antenna) are electrically equal to the Allnet ALL0
Hello Paul,
On 31.03.2017 22:38, Paul Oranje wrote:
This POE access point suited for outside usage needs an external antenna.
According FCC documentation the ENH200EXT (needs external antenna) and the
ENH200 (with internal antenna) are electrically equal to the Allnet ALL0258N.
The stock image
This POE access point suited for outside usage needs an external antenna.
According FCC documentation the ENH200EXT (needs external antenna) and the
ENH200 (with internal antenna) are electrically equal to the Allnet ALL0258N.
The stock image does not allow install of a LEDE factory image, but an