On 01/02/18 23:35, Tim Harvey wrote:
Tested on a Gateworks GW54xx
Tim Harvey (4):
kernel: add missing config symbols
imx6: add support for Linux 4.14
imx6: switch to kernel 4.14
imx6: remove support for 4.9
Hi,
karl and hauke posted some comments to the series. I've marked the w
fixes: da8990e717e1 ("uqmi: use built-in command for data-link verification")
Signed-off-by: Koen Vandeputte
---
package/network/utils/uqmi/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/network/utils/uqmi/Makefile
b/package/network/utils/uqmi/Makefile
inde
Hi Jonas,
thanks for bringing kernel 4.9 and 4.14 to the brcm63xx target and therefore
keeping
them as 'active' devices (regarding development).
I just tried 4.9 and 4.14 on my AV4202 and can't fully boot the thing due to
JFFS2 errors.
Already erased the whole main image and reflashed it via CFE
On 25/01/18 04:29, Rosen Penev wrote:
On Wed, Jan 24, 2018 at 1:56 PM, Hauke Mehrtens wrote:
On 01/24/2018 05:28 AM, Rosen Penev wrote:
At least one application (transmission) depends on CURL_CA_BUNDLE being
set in order to operate properly (Could not connect to tracker errors).
As far as I
On 17/01/18 14:23, Arne Zachlod wrote:
Specification:
- SoC: Atheros AR9342
- Flash: 8 MiB
- RAM: 64 MiB
- UART: 1x UART on PCB - 115200 8N1
- Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A)
Doesn't work:
* Flash via TFTP with Uiquiti Uboot
Installation via vendor firmware:
- upload factor
On 2018-02-13 13:03, p.wa...@gmx.at wrote:
[0.802787] 0x0100-0x00172598 : "kernel"
[0.813538] 0x00172598-0x00fc : "rootfs"
[0.824870] mtd: device 3 (rootfs) set to be root filesystem
[0.830761] 1 squashfs-split partitions found on MTD device rootfs
[0
On 17/01/18 14:16, Arne Zachlod wrote:
Signed-off-by: Arne Zachlod
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 236 ++---
.../ar71xx/base-files/etc/board.d/03_gpio_switches | 12 +-
target/linux/ar71xx/base-files/etc/diag.sh | 40 ++--
3 files change
Hi,
On 13 February 2018 at 13:03, wrote:
> Hi Jonas,
>
> thanks for bringing kernel 4.9 and 4.14 to the brcm63xx target and therefore
> keeping
> them as 'active' devices (regarding development).
> I just tried 4.9 and 4.14 on my AV4202 and can't fully boot the thing due to
> JFFS2 errors.
> A
Add sysfs 'mode' attribute to swconfig controlled LEDs.
swconfig 'link state' LEDs blink in the presence of port traffic. This
behaviour becomes more obvious as switches start to support
get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4,
3056d09b4046e0eb0f6de0f3f5432cd9fa86fc
sysfs attributes 'port_mask' & 'speed_mask' held locks whilst doing
mundane tasks such as sprintf. Refactor code to reduce length of time
locks are held unnecessarily.
Signed-off-by: Kevin Darbyshire-Bryant
---
.../generic/files/drivers/net/phy/swconfig_leds.c| 20
1 fi
In first patch appears switch from usb1.1 to usb2 usage
on archs38. In second patch we finally add new HSDK board
to target/linux/archs38.
Signed-off-by: Evgeniy Didin
CC: Alexey Brodkin
CC: Hauke Mehrtens
CC: John Crispin
Evgeniy Didin (2):
archs38: switch to kmod-usb2
archs38: add HSDK
We have managed to get USB 2.0 working good enough
on all archs38 platforms so we're ready to switch
to much faster USB 2.0.
Signed-off-by: Evgeniy Didin
CC: Alexey Brodkin
CC: Hauke Mehrtens
CC: John Crispin
---
target/linux/archs38/generic/profiles/00-default.mk | 2 +-
1 file changed, 1 in
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU (well suppor
> I just pushed a fix for this.
I can now confirm operation on both 4.9 and 4.14 :)
Thanks for fixing!
P. Wassi
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
Hey guys,
as of U-Boot v2018.01, the bootloader requires at least a GCC 6 based toolchain
for ARM targets [1]. Building will fail with GCCs prior to 6. (I.e. current
default 5.5.0)
For the Kirkwood target, I've prepared a patch to bring it to v2018.01, but
that would result
in a failed build as
On Tue, Feb 13, 2018 at 4:28 AM, John Crispin wrote:
>
>
> On 25/01/18 04:29, Rosen Penev wrote:
>>
>> On Wed, Jan 24, 2018 at 1:56 PM, Hauke Mehrtens wrote:
>>>
>>> On 01/24/2018 05:28 AM, Rosen Penev wrote:
At least one application (transmission) depends on CURL_CA_BUNDLE being
s
On Tue, Feb 13, 2018 at 12:43 AM, John Crispin wrote:
>
>
> On 01/02/18 23:35, Tim Harvey wrote:
>>
>> Tested on a Gateworks GW54xx
>>
>> Tim Harvey (4):
>>kernel: add missing config symbols
>>imx6: add support for Linux 4.14
>>imx6: switch to kernel 4.14
>>imx6: remove support for
Signed-off-by: John Crispin
---
service/instance.c | 12 +++-
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/service/instance.c b/service/instance.c
index 917b003..27e35b1 100644
--- a/service/instance.c
+++ b/service/instance.c
@@ -469,18 +469,20 @@ instance_stdio(struct u
On 11/01/18 17:28, Jakub Horák wrote:
Hello LEDE developers,
I found a bug in procd that gets triggered when long lines are printed
by services whose stdout/stderr are being logged. The bug itself is
explained in the attached patch.
However, when I was testing the fix, I found out that the bu
What is the status on this?
I have some new firmware/driver changes I'd like to get upstream
as well, but this series is stuck in limbo. The first two patches
should should be useful for anyone using my ath10k-ct stuff, and the
third will at least help IPQ4019 have a better chance at running my
Shouldn't a jump to gcc 7.2 or 8 with the Retopoline patches included,
be the target given meltdown/spectre mitigations? This is going to
affect newer Arm (mvebu potentially) and atom/x86 builds - although
these use grub generally so not so much specific to uboot not
compiling.
-Joel
On 14 Febr
On 13/02/18 19:27, Ben Greear wrote:
What is the status on this?
I have some new firmware/driver changes I'd like to get upstream
as well, but this series is stuck in limbo. The first two patches
should should be useful for anyone using my ath10k-ct stuff, and the
third will at least help IPQ
On 02/13/2018 12:03 PM, John Crispin wrote:
On 13/02/18 19:27, Ben Greear wrote:
What is the status on this?
I have some new firmware/driver changes I'd like to get upstream
as well, but this series is stuck in limbo. The first two patches
should should be useful for anyone using my ath10k-c
Hi Tim,
sorry that I haven't reviewed this earlyer, but now I saw some problems,
see my comments inline.
Can you please create a follow up patch based on current master branch.
On 01/24/2018 12:15 AM, Tim Harvey wrote:
> The Cavium OCTEON TX is an ARM 64-bit SoC leveraging CPU cores and
> peripe
On 02/13/2018 09:46 PM, Hauke Mehrtens wrote:
> Hi Tim,
>
> sorry that I haven't reviewed this earlyer, but now I saw some problems,
> see my comments inline.
>
> Can you please create a follow up patch based on current master branch.
>
> On 01/24/2018 12:15 AM, Tim Harvey wrote:
>> The Cavium O
Based on Qualcomm driver. Improves iperf3 throughput by ~20mbps on transmit on
Archer C7v4.
Signed-off-by: Rosen Penev
---
.../drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git
a/target/linux/ar71xx/files/dri
Just thought I'd give a heads up given that the stable release is upon us.
I've tried making some noise about an issue affecting ramips with
kernel 4.9 where any device under /dev/sdX (maybe even /dev/mtdblock)
will start returning bad data after a while (how long seems dependent
on RAM size). Iss
The Oolite V5.2 is a dual-radio system-on-a-module.
Specs:
- QCA9531 @ 550MHz with integrated 2T2R 802.11bgn
- 64 MB DDR2 RAM
- 16 MB SPI NOR Flash (W25Q128FV)
- 1+4x 10/100 Mbps Ethernet
- QCA9887 1T1R 802.11ac
Signed-off-by: Daniel Golle
---
.../linux/ar71xx/base-files/etc/board.d/02_net
> On Feb 11, 2018, at 3:54 AM, Yousong Zhou wrote:
>
> On 9 February 2018 at 08:28, Philip Prindeville
> wrote:
>> From: Philip Prindeville
>>
>> Allowing password logins leaves you vulnerable to dictionary
>> attacks. We disable password-based authentication, limiting
>> authentication to k
Philip Prindeville wrote:
On Feb 11, 2018, at 3:54 AM, Yousong Zhou wrote:
On 9 February 2018 at 08:28, Philip Prindeville
wrote:
From: Philip Prindeville
Allowing password logins leaves you vulnerable to dictionary
attacks. We disable password-based authentication, limiting
authentication
On 13/02/18 23:53, Rosen Penev wrote:
Based on Qualcomm driver. Improves iperf3 throughput by ~20mbps on transmit on
Archer C7v4.
this is missing the description of what the patch does.
John
Signed-off-by: Rosen Penev
---
.../drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c |
Hi Daniel,
Few minor comments inline, below.
On 14.02.2018 02:01, Daniel Golle wrote:
The Oolite V5.2 is a dual-radio system-on-a-module.
Specs:
- QCA9531 @ 550MHz with integrated 2T2R 802.11bgn
- 64 MB DDR2 RAM
- 16 MB SPI NOR Flash (W25Q128FV)
- 1+4x 10/100 Mbps Ethernet
- QCA9887
On 2018-02-13 23:53, Rosen Penev wrote:
> Based on Qualcomm driver. Improves iperf3 throughput by ~20mbps on transmit
> on Archer C7v4.
>
> Signed-off-by: Rosen Penev
> ---
> .../drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c | 14
> +++---
> 1 file changed, 7 insertions(+), 7
On 14/02/2018 04:53, Philip Prindeville wrote:
On Feb 11, 2018, at 3:54 AM, Yousong Zhou wrote:
On 9 February 2018 at 08:28, Philip Prindeville
wrote:
From: Philip Prindeville
Allowing password logins leaves you vulnerable to dictionary
attacks. We disable password-based authentication,
34 matches
Mail list logo
