gt; Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 6, 2023 11:37 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Reply to private E-ma
; HI Tim
>
> 7/8" and 1 1/4" are the two sizes that I make most.
>
> The smaller (7/8") makes thicker disks out of the same bone. So I make
> more of those then the larger ones.
>
> C.A.G.
>
> On Monday, June 5, 2023 at 10:12:11 PM EDT, Tim Ziegler <
&g
l my efforts are warranted.
>
> I have two batch's of disk now, One ready to go (should make 10 handles)
> and the other being whitened at this time. (should be ready in two weeks?)
>
> Thanks for the note.
> Have a good day.
>
> Back to work tomorrow. (Life goes on.) ;-)
Good stuff, looks like my shop when I do bone as well. Really hope you can
spark some interest in
others joining in on the bone turning.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Jun 5, 2023 at 3
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, June 5, 2023 6:12 AM
> *To:* LOM Group
> *Subject:* Fwd: Fractal burning takes another life
>
>
>
> Not sure how many of you mess around with this type of work but the
> artic
yup all good idea's Curt. keep the creative idea's flowing.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Jun 4, 2023 at 8:05 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@go
Thats pretty cool must have been some pretty nice bone slabs in the first
place?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Jun 4, 2023 at 1:44 PM 'Curt George' via Legacy Ornamental Mills <
lega
he world
> did that happen? ;-)
>
> C.A.G.
>
> On Sunday, June 4, 2023 at 12:23:03 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> hey Curt only one of those play as a video.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork &
E ARE SO MANY Possibility's out there for you to experiment with and
> learn to use so you can become a better wood worker.
>
> If you have any questions? Or comments? Feel free to state them.
>
> Have a good day/night everyone.
> talk to you all more tomorrow.
>
> C.A.
ou use
> the indexing plate and your router bits.
> THERE ARE SO MANY Possibility's out there for you to experiment with and
> learn to use so you can become a better wood worker.
>
> If you have any questions? Or comments? Feel free to state them.
>
> Have a good day/nig
. I used a set of
> large saw blades and a spring to maintain the tooth locking everything in
> place.
> I also made a plexy glass adjustable follower (but I can not find a photo
> at this time.)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C
ade a plexy glass adjustable follower (but I can not find a photo
> at this time.)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C.A.G.
>
>
> On Wednesday, May 31, 2023 at 03:38:24 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
&
egacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, May 31, 2023 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: charcuterie board Groove on LOM
>
>
>
> Yeah that was some
Yeah I enjoyed them.
Tim
On Wed, May 31, 2023, 5:47 PM wrote:
> Thank you Tim some I have seen some I haven’t nice find
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ti
Good stuff Curt.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Wed, May 31, 2023 at 8:57 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Here are some s
https://www.youtube.com/watch?v=Eqq07yRot_A
some of you may enjoy these.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
--
You received this message because you are subscribed to the Google Groups
"Legacy O
il
>> applied w/a cloth; or used a 3M-type Scotchbright pad; etc.)
>>
>>
>>
>> Thanks for sharing.
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From:
&g
needs revision: Should be "finished result was
>>> Excellent!"
>>>
>>> What is the wood you made it from? Cedar? Hemlock? Cyprus?
>>>
>>> And what finish did you apply? (brand & specifics - like Walrus Oil
>>> applied w/a cloth; or
gt;>
>> And what finish did you apply? (brand & specifics - like Walrus Oil
>> applied w/a cloth; or used a 3M-type Scotchbright pad; etc.)
>>
>>
>>
>> Thanks for sharing.
>>
>> Mac
>> --
>> ---
Yep pretty impressive all you did on that machine.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, May 30, 2023 at 7:28 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroup
t of three template holders in my shop.
>
> More latter.
> Have a good night.
>
> C.A.G.
>
> On Monday, May 29, 2023 at 10:29:55 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Good stuff, Curt I will have to try that process once.
>
> Kind R
Good stuff, Curt I will have to try that process once.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, May 29, 2023 at 9:22 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@google
Awesome thanks Curt.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, May 29, 2023 at 9:18 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hi Guys!
>
>
ote:
> No reason to apologies, I think that is pretty neat. Keep up the good work.
>
> C.A.G.
>
> On Monday, May 29, 2023 at 08:44:04 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> I measured that pitch again tonight.
> My apologies its 3/8
>
> On
I measured that pitch again tonight.
My apologies its 3/8
On Mon, May 29, 2023, 5:37 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Very Nice! I like that! ;-)
>
> C.A.G.
>
> On Monday, May 29, 2023 at 06:25:05 P
Thanks Roger
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, May 29, 2023 at 7:30 AM Ccm Ccm wrote:
> Nice
>
> On Sunday, May 28, 2023, Tim Ziegler wrote:
>
>> Good evenin
t; On May 28, 2023, at 2:55 PM, Tim Ziegler wrote:
>
>
> Found a good use of my LOM this week on a job and it worked
> extremely well.
> used 2 Rockler hold downs and to LOM mounting hubs to hold it in place.
> Mounted my stops on the rails to control my length of the groove
what finish did you apply? (brand & specifics - like Walrus Oil
> applied w/a cloth; or used a 3M-type Scotchbright pad; etc.)
>
>
>
> Thanks for sharing.
>
> Mac
> ------
> --
>
> -Original Message-
> Fr
To me the 1/2" router bit, was
> pretty straight forward. but the pitch had me questioning? (How did he do
> that???)
>
> How long is that spindle? It looks to be 4"-5" long.
>
>
>
> C.A.G.
>
>
>
> On Sunday, May 28, 2023 at 10:20:09 PM EDT, Tim Zieg
a 3M-type Scotchbright pad; etc.)
>
>
>
> Thanks for sharing.
>
> Mac
> --
> ------
>
> -Original Message-
> From:
> Sent: May 28, 2023 2:55 PM
> To: LOM Group , Tim Ziegler <
> timjzieg...@gmail.com>
> Subject: charcuterie board
Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 29, 2023 11:42 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: charcuterie board Groove on
Hey Mac,
Thanks for responding.
My goal is to work with extremely small parts on the Revo so thus the gear
size changes etc...
I can get down to an 1/8 inch pitch one my Revo now, after some mods.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
3
retty straight forward. but the pitch had me questioning? (How did he do
> that???)
> How long is that spindle? It looks to be 4"-5" long.
>
> C.A.G.
>
> On Sunday, May 28, 2023 at 10:20:09 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Shoul
3 at 9:18 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Tim I like that!
> What pitch is that rope?
> And those flutes are Very nice!
>
> C.A.G.
>
> On Sunday, May 28, 2023 at 09:38:16 PM EDT, Tim Ziegler <
> Very Nice Job Tim.
>
> C.A.G.
>
> On Sunday, May 28, 2023 at 09:41:50 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Thanks yeah the laser work is the fun part and we have some many different
> fonts we can get now, the
> sky is the limit.
>
s?
>
> And as always love the laser work
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 29, 2023 4:56 AM
> *To:* LOM Group ; Ti
up the good work.
>
> C.A.G.
>
>
> On Sunday, May 28, 2023 at 02:55:49 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Found a good use of my LOM this week on a job and it worked
> extremely well.
> used 2 Rockler hold downs and to LOM mounting h
We also have Church services at the cemeteries to honor our fallen
comrades.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, May 28, 2023 at 12:05 AM 'Frank Vidmar' via Legacy Ornamental Mills
wrote:
Yes and its actually a national law to pause a certain time tomorrow for a
moment of silence.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sat, May 27, 2023 at 9:55 PM wrote:
> So do you guys have a min
Thanks for sharing that was touching too.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sat, May 27, 2023 at 7:56 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> w
n a path
> That I ended up taking.
> Lots of Fun!
>
> Thank you.
>
> C.A.G.
>
> On Friday, May 26, 2023 at 10:40:45 AM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Good stuff Curt thanks for sharing.
>
> Kind Regards,
>
> Timothy J. Ziegler
Good stuff Curt thanks for sharing.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, May 26, 2023 at 7:44 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
-ornamental-mills@googlegroups.com> wrote:
> I like that, something that I've not done before.
> Thanks for you idea, could be a good get-me-by in time of need.
>
> Have a great day.
>
> C.A.G.
>
> On Thursday, May 25, 2023 at 06:56:36 AM EDT, Tim Ziegler <
>
I use precisely cut wood blocks typically made from baltic birch that work
great for me.
I mark each one for the width they are with a Red Sharpie.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Wed, May 2
>
> Bill
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, May 24, 2023 3:49 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Ornamental Mill for sa
The last LOM's we looked at, they were still for sale.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, May 23, 2023 at 10:04 AM Vadim Sidelnikov
wrote:
> Hi James,
>
> Do you know if this one sold alr
lol
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, May 23, 2023 at 10:02 AM 'Denson Ingram' via Legacy Ornamental
Mills wrote:
> Like working your fingers to the bone 😁
> Great work
> Denson
>
> Sent
yup good stuff for sure.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, May 23, 2023 at 8:25 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Good mor
Good to know Curt,
Yeah I find a 1/4 washer is usually to big for legacy stuff and I always
want a better fit.
I usually buy the next size down too.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, May
Hey Curt,
Nice job as always and great to see your excitement in bone turning. I
enjoy it as well but don't see to find quite as
much time to play with it. I have a bunch of discs ready to glue up again
though so as soon as I get done procrastinating
my cabinet doors I will have more play time. So
too tightly. A tiny
> drop of super glue works the same, released with heat on the metal part.
> But I can see that getting messy over time.
> Nice save!
> DanK
>
> On Friday, May 19, 2023 at 7:02:10 AM UTC-4 Tim Ziegler wrote:
>
> Hey Curt it still looks pretty good. Eve
Hey Curt it still looks pretty good. Even zoomed in on it so I think you
saved it.
Where you using a pen mandrel then? Have you ever thought of putting a thin
rubber washer on both ends?
Then just tighten your thumb screw extra tight? Just a thought.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodW
Hey Curt,
Great information and glad the gear is holding up.
Your drive is an interesting concept.
It's incredible what you can do on that little 200 now.
Nice job on the handle too. excellent description of your
accomplishments too.
Great Job and thanks for sharing.
Kind Regards,
Timothy J. Zie
yup that is pretty cool for sure.
Not my style but neat none the less.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sat, May 13, 2023 at 9:06 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamen
y, I used a 1/2" pitch, single start rope . with two router
> bits, the first one is a 1/8" bull nosed bit, and the other is a 3/4" wide,
> flat bottomed brick molding bit.
>
> If all goes well, tomorrow I will complete this job. just some cutting to
> size and hand s
b. just some cutting to
> size and hand sanding will be needed.
> I plan to use both glue and the original pins to hold the bone onto the
> knife.
>
> Have a good night everyone.
> talk to you all more tomorrow.
>
> C.A.G.
> On Sunday, May 7, 2023 at 11:09:44 PM EDT, Tim Zie
Hey Curt,
Yes that is pretty cool for sure.
Thanks for sharing all the pix on the process.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, May 7, 2023 at 8:35 PM 'Curt George' via Legacy Ornamental Mi
;
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, May 3, 2023 9:34 AM
> *To:* LOM Group
> *Subject:* Twin Turbo Vise
>
>
>
> Hey, you must check this ou
Hey, you must check this out.
https://www.youtube.com/watch?v=4kTLIoBisCM
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
--
You received this message because you are subscribed to the Google Groups
"Legacy O
se not, I meant try the hand crank to see if it easier then you
>> will know if its
>>
>> easy and wont be straining your spindle motor or gear sets
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com
>> *On B
ant try the hand crank to see if it easier then you
> will know if its
>
> easy and wont be straining your spindle motor or gear sets
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behal
ce Bill.
>
> I very much have always like your chain configuration. Quick, Clean,
> Easy... Awesome!
>
> C.A.G.
>
> On Sunday, April 30, 2023 at 11:10:27 PM EDT,
> wrote:
>
>
> Or he could make up some sprockets and chain that’s a cheaper way to
>
> Get
shop
320-630-2243 cell
On Mon, May 1, 2023 at 6:24 AM wrote:
> Yes
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 9:07 PM
>
n that’s a cheaper way to
>
> Get pitches to cut threads
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:24 PM
> *To:* legacy-ornamental
less power
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:47 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Su
o cut threads
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, May 1, 2023 12:24 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:*
just got to buy up a few used LOM's and suddenly you have all the parts you
need. lol
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Apr 30, 2023 at 8:47 PM cdkr...@gmail.com
wrote:
> Before LOMs ca
For sure
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Apr 30, 2023 at 5:23 PM wrote:
> These machines always make you appreciate just how great our legacy
> ornamental mills
>
> are
>
>
>
> Bill
>
erhaps making it
> better,) Others will also want to use and keep them in the future.???.
>
> Talk to you and everyone more latter.
> Have a Great day.
>
> C.A.G.
> On Sunday, April 30, 2023 at 10:43:56 AM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
ael Kratky
> 119 Riverview Rd.,
> Northville, N.Y. 12134
>
> 518 863-2821
> text 518 207-7247
>
> Email;
> krat...@roadrunner.com
>
>
>
> On Apr 30, 2023, at 10:43 AM, Tim Ziegler wrote:
>
> Good stuff. Makes me glad I have a legacy or so.
> Thanks for
Good stuff. Makes me glad I have a legacy or so.
Thanks for sharing Curt.
On Sun, Apr 30, 2023, 9:19 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> https://www.youtube.com/watch?v=oQR5G8npdek
>
> Good morning everyone. This is a short video that
Well our prayers will be with you.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, Apr 25, 2023 at 11:05 PM Tim Porter wrote:
> Thanks. I look forward to being a contributor. For a while I will be
>
Welcome Tim,
Happy to have you in our group, you will be a great fit here and if you can
make parts even better.
We will need to nickname you however we are by far the most common name in
this group and
if my count is accurate we have at least 5-6 Tim's if not more. So if
there is not any Tim's g
slab flattening mill is not in this tour but everyone
> should find this tour of Woodpeckers narrated by the one and only Tom
> McLaughlin very enlightening.
>
> Michael Kratky
> 119 Riverview Rd.,
> Northville, N.Y. 12134
>
> 518 863-2821
> text 518 207-7247
>
> Em
thanks Mac,
I will have to check they have it all set up for anyone to use.
I tried to get them to buy woodpeckers but was about the funds.
Wood Haven makes one too that could be used for slabs would have to add to
it maybe.
https://woodhaven.com/collections/planing-sled/products/woodhaven-3000-2
Very Nice
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Thu, Apr 20, 2023 at 8:57 PM Tim Woodard wrote:
> We made one withe scraps for a ash ring coffeetable
> https://youtu.be/72fr4bkYtvw you can use L
Our wood working group Central Minnesota WoodWorkers have one. I'd have to
look to see which brand but its big.
Does Tru Track make one?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Thu, Apr 20, 2023 at
At least yours is more robust though Bill.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Thu, Apr 20, 2023 at 1:12 AM wrote:
> Add our legacy to it and possibly get something similar to this
> https://w
That has to be one of the more flimsy slab mills I've seen.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Thu, Apr 20, 2023 at 12:07 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@
Dan you may have to wait until Curt can answer that. All of us get all the
emails.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, Apr 18, 2023 at 7:45 PM Dan Krager wrote:
> Can anyone tell me how to
Let me know...
>
> C.A.G.
>
> On Monday, April 17, 2023 at 12:48:16 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Excellent questions and math Dan, you had my brain spinning.
> you are far from the only one that gets hung up on math. I'd say 75%
one handle some 100 times, to get to what it looks like now.) Lots
>> of work.
>> And the diamonds are so small the camera dose not pick up the details
>> easily. I took 4 photo's of this handle and only one photo shows up well.
>> I will be trying to do this again,
> I will be trying to do this again, But not for a while. ;-)
>
> I have to go.
> talk to you all more latter today.
>
> C.A.G.
>
> On Monday, April 17, 2023 at 06:57:32 AM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Yeah what was your pitch Cur
1000ex going smaller would not be as useful for me, basically due to
> this machine is designed to turn LARGE spindles.
>
> And going small would not really help me in normal operations I use my
> 1000 for most of the time.
>
> but having said that, it still would only cost me $40.00. S
ly cost me $40.00. So its not an
> expensive MOD, Im just not sure it would be something that I need at this
> time? But for my 200 this is the best tool for the jobs I am doing on NOW.
>
>
>
> Bye the way here is today's bone handle. the small checkering worked. even
> though
ng small would not really help me in normal operations I use my
> 1000 for most of the time.
>
> but having said that, it still would only cost me $40.00. So its not an
> expensive MOD, Im just not sure it would be something that I need at this
> time? But for my 200 this is the best
me? But for my 200 this is the best tool for the jobs I am doing on NOW.
>
> Bye the way here is today's bone handle. the small checkering worked. even
> though I did make a few mistakes on the indexing...
>
> C.A.G.
>
> On Sunday, April 16, 2023 at 09:59:03 PM EDT,
Yup all makes sense. thanks for sharing all the pix.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Apr 16, 2023 at 9:32 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegr
I agree. That would be great.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Apr 16, 2023 at 7:56 PM wrote:
> Curt can you show a couple of pics showing how the leadscrew attaches to
> your mill
>
>
Thanks for all the information Curt. Super excited to either adapt to your
idea or look at some other gear ratios.
Either way I'm really excited to see there are still things one can
adapt to and change.
I have some idea I'm working on too so I am excited to see both and the end
result.
Kind Regar
Very Good Dan, way to get creative.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Apr 16, 2023 at 2:36 PM Dan Krager wrote:
> I got inspired to prepare a drive plate for my lathe. First I was just
e screw
> when, inches would work to get the job done.
> This would mean a $8.60 or $10.36 price tag. ;-)
>
> Im going to hit the hay now. Have a good night.
> Talk to you all tomorrow.
> Take care!
>
> C.A.G.
>
>
>
> On Saturday, April 15, 2023 at 11:27:05
This would mean a $8.60 or $10.36 price tag. ;-)
>
> Im going to hit the hay now. Have a good night.
> Talk to you all tomorrow.
> Take care!
>
> C.A.G.
>
>
>
> On Saturday, April 15, 2023 at 11:27:05 PM EDT,
> wrote:
>
>
> Tim I toyed with doing it I di
t;
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, April 16, 2023 6:26 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Drive motor on my Revo
>
>
>
Hey Dan,
yeah I am considering it too. I know it works as Bill had done it a while
back too.
So with Curt and Bill both playing with the idea its got to be a good idea.
I want to gear down to do some fancy pen turning too which can not be done
as well with the current thread config.
So let me kno
Wow that was super awesome, I kept wanting to tell him about our LOM's lol
There is another one coming right up behind this one that is great too.
https://www.youtube.com/watch?v=PetMqfDWf9Q
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294
Hey Bridgette,
No actual the business side of the Revo is on the outside. So it's actually
designed very well. I got some more pixels of it and I'm sure Bill will
chime into why he likes the Revo so much.
Everything is right in front of the operator.
Thanks for asking.
Tim
On Fri, Apr 14, 202
yes
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Apr 14, 2023 at 7:31 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello and Good morning everyon
Yup thats what we hope for. More playing to do lol.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Apr 10, 2023 at 9:40 PM Ccm Ccm wrote:
> Nice job Curt that should give you a better selection of p
e set-screw.
> Its the same process for cutting the 5/8-4. Supper EASY. ;-)
>
> C.A.G.
>
> On Monday, April 10, 2023 at 10:20:13 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Hey Curt,
>
> Super excited to see your results for sure. I may conve
901 - 1000 of 2718 matches
Mail list logo