Thanks again Mike
I am going senile (or have gone )
Managed to shift the leadscrew to the left.
The fault was the reversing plate it was upside down and inside out It
came like that when I bought it See pic. one
All is now working o.k.
Also thanks for putting up how to crank index. Printed off
Move the drive motor or there may be some slack in the motor to lead
screw coupler sleeve. That will move it all down and give you the room
to line up the two 45T gears
On 10/3/2016 12:50 PM, Richard Ellis wrote:
Thanks Mike
There is something wrong with My Wood chuck, because that is what
Thanks Mike
There is something wrong with My Wood chuck, because that is what I have
tried doing. I am trying to contact the previous owner to see if he had
done a reversing job.
*If I first put a 45 on the leadscrew that is all that lines up with the
240.* To do a clockwise spiral the 60T that
Hello Richard
The small reversing shaft uses the 45 tooth gear.
For right hand twist on the main lead screw I assemble the 45T then the
big washer, then the drive gear I will be using, 60T, then another flat
washer and then set it all tight with the Allen screw and washers or handle.
When
orna...@googlegroups.com
> *Subject:* Re: Reversing a spiral
>
>
>
> Richard there is a separate gear mechanism for the Wood Chuck, I sent you
> the WOOD CHUCK Videos, it is shown in the video how to set up the gears for
> reversing. I will see if
Subject: Re: Reversing a spiral
Richard there is a separate gear mechanism for the Wood Chuck, I sent you the
WOOD CHUCK Videos, it is shown in the video how to set up the gears for
reversing. I will see if I can find more info. for you.
More latter.
C.A.G.
_
From: "Richard
<rchrd.ell...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Monday, October 3, 2016 7:59:27 AM
Subject: Reversing a spiral
Hi All and especially Mike who has a wood chuck
I am stuck my head just won't work today.
I am doing
Hi All and especially Mike who has a wood chuck
I am stuck my head just won't work today.
I am doing a 6 inch spiral and want to turn it into a pineapple shape. i:e
240/40 on spindle and 240 driving a 60T
I have completed the clockwise part and am now stuck.
How do I set the gears for the
